16×2 LCD Display with I2C Interface – Blue Backlight
₵45.00
Display your project data with only four connections. This 16×2 LCD comes with the I2C backpack already soldered, making it ready to use without additional soldering.
Display: 16 characters × 2 lines
Backlight: Blue with white characters
Interface: I2C (VCC, GND, SDA, SCL)
Operating Voltage: 5V DC
Contrast: Adjustable onboard potentiometer
Beginner Friendly: I2C adapter already soldered
Best For: Arduino, ESP32, Raspberry Pi, IoT and STEM projects
A 16×2 character LCD provides two rows of 16 characters, while using an I2C interface greatly reduces the number of microcontroller connections required compared with the standard parallel interface.
50 in stock
The 16×2 I2C LCD Display is a simple and beginner-friendly character display for Arduino, ESP32, Raspberry Pi and other microcontroller projects. It displays 16 characters on each of two rows, making it ideal for showing sensor readings, menu options, counters, status messages and other project information.
Unlike the traditional 16×2 LCD that requires several data and control wires, this version comes with an I2C interface backpack already soldered to the display. Only four connections; VCC, GND, SDA and SCL are required.
This makes the module particularly suitable for students and beginners who may not have soldering equipment or experience. It also saves valuable GPIO pins on the microcontroller and produces cleaner project wiring.
The onboard potentiometer allows the display contrast to be adjusted easily. The module is compatible with commonly used Arduino I2C LCD libraries such as LiquidCrystal_I2C.
No additional I2C backpack or soldering is required.
Technical specifications
| Specification | Details |
|---|---|
| Display type | Alphanumeric character LCD |
| Display format | 16 characters × 2 lines |
| Backlight colour | Blue |
| Character colour | White/light characters |
| Interface | I2C |
| Connections | VCC, GND, SDA, SCL |
| Supply voltage | 5V DC |
| LCD controller | HD44780-compatible |
| I2C backpack | Pre-soldered |
| Contrast adjustment | Onboard potentiometer |
| Backlight | LED |
| Typical dimensions | Approx. 80 × 36 mm |
| Arduino support | LiquidCrystal_I2C and compatible libraries |
| Soldering required | No |
| Suitable for | Arduino, ESP32, Raspberry Pi, STM32 and embedded systems |
Applications
Arduino sensor displays, temperature and humidity monitors, digital clocks, counters and timers, smart-home projects, IoT devices, robotics interfaces, battery-monitoring systems, menu systems, school STEM projects and embedded-system prototypes.
Package contents
1 × 16×2 Blue LCD Display with pre-soldered I2C backpack
📖 Helpful Resources:
✔ Arduino 16×2 LCD Display with I2C interface Guide
✔ Raspberry Pi LCD Display with I2C Tutorial
✔ YouTube Tutorials – 16×2 I2C LCD Setup & Programming
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a 16×2 LCD Display Module with I2C backpack (Blue) in Ghana? Whether you’re working on IoT projects, embedded systems, or home automation, this module offers high clarity, easy integration, and reliable performance. Order today for fast delivery in Kumasi and across Ghana!
Related products
20×4 LCD Display Module (Blue Backlight) | 2004A Character Screen
Double the space, double the data. The standard 16x2 LCD is great, but sometimes you need more room. The 20x4 LCD gives you 4 lines of text (20 characters per line), allowing you to display complex menus, sensor readings, and status messages all at once.
-
Size: 20 Characters x 4 Lines.
-
Display: White Text on Blue Background.
-
Controller: HD44780 (Standard Industry Chip).
- Best For: Weather Stations, 3D Printers, and Advanced Menus.
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
Teach your robot to see. This sensor emits infrared light and detects reflections to see if an object is in front of it. It is the essential component for building "Obstacle Avoiding Robots" and simple security alarms.
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
Build your own Fire & Gas Leak Alarm. The MQ-2 is a dual-purpose safety sensor. It detects Smoke (from fires) and Combustible Gases (like LPG, Propane, and Butane). It is the standard module for building "Smart Kitchen" safety monitors.
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.