HC-12 433MHz Long-Range Wireless Serial Transceiver Module
₵60.00 Original price was: ₵60.00.₵55.00Current price is: ₵55.00.
Long-range 433MHz wireless serial transceiver for Arduino, ESP32, STM32 and other microcontroller projects. The HC-12 provides easy UART-based wireless communication with configurable channels, baud rate and transmission power, making it ideal for telemetry, robotics, remote sensors and automation systems.
Frequency: 433.4 – 473.0MHz
Supply: 3.2 – 5.5V DC
Interface: TTL UART Serial
Baud Rate: 1200 – 115200bps
TX Power: Up to 100mW / +20dBm
Channels: Up to 100
Range: Up to approximately 1km line-of-sight
Best For: Telemetry, wireless sensors, robotics, automation and long-range microcontroller communication
1 in stock
The HC-12 433MHz Long-Range Wireless Serial Transceiver Module provides simple and reliable wireless serial communication between Arduino, ESP32, STM32 and other microcontroller systems.
Unlike SPI-based RF modules, the HC-12 uses a straightforward TTL UART serial interface, making it especially convenient for beginners. Data transmitted through the TX pin of one HC-12 can be received through the RX pin of another module, allowing two devices to communicate wirelessly much like a conventional serial cable.
The module operates across approximately 433.4–473.0MHz, supports up to 100 selectable communication channels, and provides adjustable RF transmission power up to 100mW (20dBm). Communication parameters including baud rate, channel, operating mode and transmission power can be configured using AT commands.
Under favourable open-area line-of-sight conditions, the HC-12 can achieve communication distances of up to approximately 1km. Actual range depends on antenna type, transmission settings, interference, obstacles and installation conditions.
Its transparent serial operation makes the HC-12 suitable for wireless sensor networks, telemetry, robotics, remote monitoring, automation systems and projects requiring longer communication distances than conventional short-range wireless modules.
Technical Specifications
| Specification | Details |
|---|---|
| Module | HC-12 |
| Type | Wireless Serial Transceiver |
| Frequency Range | 433.4–473.0MHz |
| Communication Channels | Up to 100 |
| Channel Spacing | 400kHz |
| Supply Voltage | 3.2–5.5V DC |
| Communication Interface | TTL UART Serial |
| UART Baud Rate | 1200–115200bps |
| Maximum RF Output Power | 100mW / +20dBm |
| RF Power Levels | 8 adjustable levels |
| Receiver Sensitivity | Up to approximately -117dBm |
| Maximum TX Current | Approximately 100mA |
| Configuration | AT Commands |
| Communication Mode | Half-duplex |
| Maximum Advertised Range | Up to approximately 1000m line-of-sight |
| Pins | VCC, GND, RXD, TXD, SET |
| Compatible Platforms | Arduino, ESP32, ESP8266, STM32, Raspberry Pi and other UART devices |
These specifications correspond to the standard HC-12 operating characteristics; individual board revisions can differ slightly.
Applications
- Long-range Arduino communication
- Wireless sensor networks
- Remote monitoring systems
- Robotics and remote control
- Agricultural monitoring
- Wireless telemetry
- Home and industrial automation
- Environmental monitoring
- Wireless data acquisition
- IoT projects
- STEM and educational projects
Package Includes
1 × HC-12 433MHz Wireless Serial Transceiver Module
Related products
433MHz Wireless Two-Way Light Switch Kit White
The 433MHz Wireless Two-Way Light Switch Kit allows one light or appliance to be controlled wirelessly from two different locations. It includes one receiver and two white wireless transmitters, making it ideal for bedrooms, corridors, staircases, halls, shops and home lighting upgrades without extra wall wiring.
ESP32-CAM with OV2640 Camera and MB USB Programmer
ESP32-S3 N8R2 Development Board (Dual USB-C, 44-Pin, 8MB Flash + 2MB PSRAM)
NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
Add Satellite Navigation to your project. This high-precision GPS module allows your Arduino, ESP32, or Drone to know its exact location, speed, and time. It comes with a detachable ceramic antenna and a built-in backup battery for fast "Hot Starts."
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
NRF24L01+ 2.4GHz Wireless Transceiver Module
Compact 2.4GHz wireless transceiver module for Arduino, ESP32, STM32 and other microcontroller projects. The NRF24L01+ provides low-power bidirectional wireless communication with selectable data rates up to 2Mbps, an integrated PCB antenna and SPI connectivity.
Frequency: 2.4GHz ISM band
Operating Voltage: 1.9–3.6V DC (3.3V recommended)
Interface: SPI
Data Rates: 250kbps / 1Mbps / 2Mbps
Antenna: Integrated PCB antenna
Range: Up to approximately 100m line-of-sight
Best For: Wireless sensors, robotics, remote controls, IoT and Arduino communication
NRF24L01+ PA/LNA 2.4GHz Long-Range Wireless Transceiver Module with Antenna
NRF24L01+ PA/LNA 2.4GHz long-range wireless transceiver module with external antenna for Arduino, ESP32, STM32 and other microcontroller projects. The integrated power amplifier and low-noise amplifier provide significantly greater communication range than the standard NRF24L01+, making it ideal for wireless sensor networks, robotics, telemetry and remote-control applications.
Frequency: 2.4GHz ISM
Operating Voltage: 3.0–3.6V DC
Interface: SPI
Data Rate: 250kbps / 1Mbps / 2Mbps
Antenna: External SMA antenna included
Range: Up to approximately 800–1100m line-of-sight
Best For: Long-range wireless communication, IoT, robotics and telemetry

Reviews
There are no reviews yet.