Dual USB Power Bank Module 5V 2.4A (LX-LBU2C)
₵30.00
The Dual USB Power Bank Module 5V 2.4A (LX-LBU2C) lets you build a rechargeable power bank using 3.7V lithium batteries. It features USB Type-C and Micro-USB charging inputs, two 5V USB outputs and integrated charging and boost circuitry for portable electronics projects.
20 in stock
The Dual USB Power Bank Module (LX-LBU2C) is a compact charging and power management board designed for building DIY rechargeable USB power banks. It combines lithium battery charging, voltage boosting and dual USB output in one convenient module.
Using a compatible 3.7V lithium-ion battery, the board converts battery power into a regulated 5V output for charging mobile phones and powering USB electronic devices.
With two USB-A output ports, USB Type-C and Micro-USB charging inputs, and a compact PCB design, it is suitable for portable power supplies, electronics projects and custom power bank construction.
Key Features
- Dual USB Output: Two USB-A ports for powering compatible USB devices.
- 5V 2.4A Output: Provides up to 2.4A combined output current across both USB ports.
- Type-C and Micro-USB Charging: Two input connector options for recharging the connected lithium battery.
- 3.7V Lithium Battery Support: Designed for standard single-cell lithium-ion battery configurations.
- Integrated Boost Converter: Increases the battery voltage to a regulated 5V USB output.
- Battery Charging Management: Includes onboard circuitry for controlling lithium battery charging.
- Compact Design: Suitable for installation inside custom power bank enclosures and portable electronic devices.
- Battery Connection Pads: Clearly marked positive and negative terminals for connecting the battery.
Technical Specifications
| Specification | Details |
|---|---|
| Model | LX-LBU2C |
| Product Type | Power Bank Charging and Boost Module |
| Battery Configuration | 1S Lithium-Ion |
| Nominal Battery Voltage | 3.7V DC |
| Full-Charge Battery Voltage | 4.2V |
| Charging Input Voltage | 5V DC |
| Charging Input Interfaces | USB Type-C and Micro-USB |
| USB Output Voltage | 5V DC |
| Maximum USB Output Current | 2.4A Combined |
| USB Output Ports | 2 x USB-A |
| Voltage Conversion | DC-DC Step-Up |
| Battery Connections | BAT+ and BAT- |
| PCB Colour | Blue |
Applications
1. DIY Power Bank Construction
Build a rechargeable power bank using the LX-LBU2C module, a compatible lithium battery and a protective enclosure.
DIYGH stocks the 18650 Li-ion Rechargeable Battery 3.7V 2500mAh for suitable rechargeable electronics and portable power projects.
2. Portable USB Power Supply
Create a rechargeable 5V power source for USB lights, small electronic devices and portable instruments.
3. Arduino and Microcontroller Projects
Use the regulated 5V USB output to power compatible microcontroller boards and embedded projects.
For example, the module can supply USB power to an Arduino Uno R3 Development Board when the battery and module can support the connected load.
4. Rechargeable Electronic Equipment
Integrate USB charging and battery-powered operation into suitable custom electronic devices.
5. STEM and Electronics Projects
Learn about lithium battery charging, DC-DC voltage boosting, USB power management and rechargeable power supply design.
How the Dual USB Power Bank Module Works
The LX-LBU2C performs two main functions.
Battery Charging
When a regulated 5V supply is connected through the USB Type-C or Micro-USB input, the onboard charging circuit charges the connected 3.7V lithium battery.
USB Power Output
When a USB device is connected, the boost converter increases the battery voltage to provide a 5V output through the USB-A ports.
The two USB outputs share the module’s maximum 2.4A output capability.
Battery Connection and Wiring
The module provides two solder pads for connecting a compatible lithium battery.
| Terminal | Connection |
|---|---|
| BAT+ | Battery positive (+) |
| BAT- | Battery negative (-) |
| USB Type-C | 5V charging input |
| Micro-USB | Alternative 5V charging input |
| USB-A Ports | 5V power outputs |
For simple single-cell projects, the 1-Slot 18650 Battery Holder Case provides a convenient way to install a battery without soldering directly onto the cell.
Can Multiple 18650 Batteries Be Used?
Yes. Multiple suitable lithium-ion cells can be connected in parallel to increase battery capacity while maintaining the same nominal voltage.
However, the cells must be properly matched, at closely equal voltages before connection, and incorporated into a suitably protected 1S battery assembly.
Do not connect batteries in series to this module. A 2S or higher-voltage battery pack is incompatible with its 1S battery input.
Installation Guide
- Prepare a compatible 3.7V lithium-ion battery or protected 1S battery pack.
- Identify the BAT+ and BAT- pads on the module.
- Connect the battery, observing the correct polarity.
- Secure and insulate the battery connections.
- Connect a suitable 5V supply to either charging input.
- Check the battery charging operation.
- Connect a compatible device to a USB-A output and verify the 5V supply.
- Install the assembly in a suitable protective enclosure.
Important Usage Information
- Use only compatible 3.6V/3.7V nominal lithium-ion or lithium-polymer battery configurations.
- Do not connect 2S, 3S or 4S battery packs.
- Never reverse the battery connections.
- The 2.4A output specification is the combined rating for both USB-A ports.
- Ensure the battery can safely supply the current required by the connected devices.
- Use suitable battery protection and insulated wiring.
- Never charge damaged or swollen lithium batteries.
- Avoid unattended charging.
- The USB outputs provide 5V power and should not be advertised as supporting USB Power Delivery or higher-voltage fast charging.
Package Includes
- 1 x Dual USB Power Bank Module 5V 2.4A (LX-LBU2C)
Battery, charging cable and enclosure are not included.
Build your rechargeable electronics and DIY power bank projects with components available from DIYGH Tech Hub, Apatrapa Junction, Kumasi, Ghana.
Related products
18650 Li-ion Rechargeable Battery 3.7V 2500mAh – High Output Cell (Ghana)
20A Intelligent LCD Solar Charge Controller
3S 40A 18650 Lithium Battery BMS Protection Board
4S 40A 18650 Lithium Battery BMS
4S 4A Type-C Lithium Battery Boost Charger Module 16.8V
The 4S 4A Type-C Lithium Battery Boost Charger Module converts a 3-6V DC input into a regulated 16.8V charging supply for four-series lithium-ion and LiPo battery packs. It features USB-C input, approximately 1.12A charging current under suitable conditions, charging status indicators and a compact design for rechargeable battery projects.
5V 1W Mini Solar Panel 89.5×89.5mm for Arduino, IoT & DIY Projects
CCLAMP CL-1615 15W Portable Solar Panel Charger
IP2312 3A Type-C Lithium Battery Charger Module 4.2V
The IP2312 3A Type-C Lithium Battery Charger Module provides efficient charging for single-cell 3.7V Li-ion and LiPo batteries. It features a USB-C input, up to 3A charging current, 4.2V CC/CV charging control and LED status indicators, making it suitable for rechargeable electronics and battery-powered projects.

Reviews
There are no reviews yet.