0.96 Inch OLED Display Module (Blue) | I2C Interface 128×64 Pixel
₵47.00
Sharp, Bright, and Compact. This 0.96-inch OLED screen delivers incredibly crisp blue text on a black background. Unlike standard LCDs, it doesn’t need a backlight, making it thinner and more energy-efficient. It uses the I2C interface, so you only need 2 wires to control it!
-
Resolution: 128 x 64 Pixels.
-
Color: Blue Text on Black Background.
-
Interface: I2C (Only 4 pins).
- Controller: SSD1306 (Standard Library).
- Best For: Smart Watches, Weather Stations, and Battery Monitors.
1 in stock
The 0.96 inch OLED LCD Module (Blue) is a super-bright, low-power display designed for Arduino, Raspberry Pi, ESP32, and other microcontrollers. Featuring I2C (4-pin) communication, this screen provides sharp, pixel-perfect graphics and text, making it perfect for IoT dashboards, sensor monitoring, and smart devices.
🔹 I2C Interface for Easy Wiring & Power Efficiency ⚡
✔ Display Type: OLED, 0.96-inch, 128×64 resolution.
✔ Color: Blue pixels on a black background for high contrast.
✔ Interface: I2C (IIC) – Only 4 pins needed (VCC, GND, SCL, SDA).
✔ Operating Voltage: 3.3V – 5V (compatible with Arduino & Raspberry Pi).
✔ Power Consumption: Ultra-low energy use, no backlight required.
✔ Viewing Angle: Wide-angle, clear display from all directions.
✔ Driver Chip: SSD1306 (fully supported by Arduino libraries).
🔹 Applications – Where to Use the 0.96 inch OLED Display Module 🛠️
✔ Arduino & Raspberry Pi Projects – Display sensor data, system logs, and messages.
✔ IoT & Smart Devices – Show real-time temperature, humidity, and sensor readings.
✔ Wearable Tech & Compact Displays – Use in smartwatches, meters, and small gadgets.
✔ Robotics & AI Systems – Monitor robotic movements, battery levels, and sensor feedback.
✔ DIY Electronics & STEM Education – Great for learning programming and microcontroller interfacing.
🔹 How to Use & External Resources 📚
The 0.96″ OLED module connects via I2C (SDA, SCL) and is compatible with the Adafruit SSD1306 OLED library for quick setup. Simply connect VCC, GND, SCL, and SDA to your microcontroller and start displaying text, images, or animations.
📖 Helpful Resources for 0.96 inch OLED LCD:
✔ SSD1306 OLED Arduino Setup Guide
✔ Raspberry Pi OLED Display Tutorial
✔ Adafruit SSD1306 Library & Code Examples
✔ YouTube Tutorials – OLED Display with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a 0.96 Inch OLED LCD Module (I2C, 4-Pin, Blue) in Ghana? Whether for IoT projects, robotics, or embedded monitoring, this ultra-clear, power-efficient OLED screen is a must-have. Order today for fast delivery across Ghana!
Related products
Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm - 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.