1-Channel 5V Relay Module | Low Level Trigger for Arduino
Original price was: ₵15.00.₵12.00Current price is: ₵12.00.
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your microcontroller from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
1 in stock
The 1-Channel 5V Relay Module (Low-Level Trigger) allows Arduino, Raspberry Pi, ESP32, and other microcontrollers to control high-voltage electrical devices safely. Featuring an optocoupler for isolation and a low-level trigger input, this relay module ensures stable, noise-free switching for smart home automation, industrial control, and IoT applications.
🔹 High-Performance Relay with Optocoupler Protection 🔌
✔ Operating Voltage: 5V DC (Microcontroller Compatible).
✔ Trigger Type: Low-Level Trigger (Active LOW Switching).
✔ Relay Rating: AC 250V/10A | DC 30V/10A.
✔ Optocoupler Isolation: Prevents interference & improves safety.
✔ LED Indicators: Power & relay status LED for easy debugging.
✔ Screw Terminals: For secure wiring of high-voltage devices.
✔ Compact & Durable Design: Ideal for embedded systems & automation.
🔹 Applications – Where to Use the 1-Channel 5V Relay Module 🛠️
✔ Smart Home Automation – Control lights, fans, and home appliances remotely.
✔ Industrial & Security Systems – Manage alarms, motors, and door locks.
✔ Arduino & Raspberry Pi Projects – Integrate with IoT platforms for cloud control.
✔ Remote Relay Switching – Enable relay activation through Wi-Fi or Bluetooth.
✔ DIY Electronics & Robotics – Use in automated circuits requiring high-power switching.
🔹 How to Use & External Resources 📚
The relay module connects easily to Arduino, ESP8266, STM32, and Raspberry Pi via a LOW (0V) trigger signal on the IN pin. Simply connect VCC, GND, and IN, and switch high-voltage devices safely.
📖 Helpful Resources:
✔ Relay Module Basics & Pinout
✔ Arduino Relay Switching Guide
✔ YouTube Tutorials – 5V Relay Module with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a 1-Channel 5V Relay Module (Low-Level Trigger) in Ghana? Whether for home automation, industrial control, or IoT switching, this reliable and efficient relay module is a must-have. Order today for fast delivery across Ghana!
Related products
20×4 LCD Display Module (Blue Backlight) | 2004A Character Screen
-
Size: 20 Characters x 4 Lines.
-
Display: White Text on Blue Background.
-
Controller: HD44780 (Standard Industry Chip).
- Best For: Weather Stations, 3D Printers, and Advanced Menus.
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm - 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.