2S/3S Type-C Lithium Battery Charger Module 8.4V/12.6V (IP2326)
₵30.00
The 2S/3S Type-C Lithium Battery Charger Module (IP2326) supports charging 7.4V and 11.1V lithium battery packs, with selectable 8.4V or 12.6V charging voltage through onboard solder configuration. It features USB-C input, up to 1.5A charging capability and CC/CV charging for rechargeable electronics and DIY battery projects.
50 in stock
The 2S/3S Type-C Lithium Battery Charger Module is a compact, configurable USB-C charging board designed for lithium-ion and LiPo battery packs containing two or three cells connected in series.
Powered by the IP2326 charging controller, the module supports both 2S (8.4V) and 3S (12.6V) charging configurations. The required battery configuration is selected through solder settings on the PCB, making the board suitable for different rechargeable battery projects.
It features CC/CV charging, up to 15W charging power, programmable charging current and support for compatible fast-charging power adapters.
Key Features
- Dual Battery Configuration: Supports 2S and 3S lithium-ion battery packs.
- Selectable Charging Voltage: 8.4V for 2S or 12.6V for 3S.
- Solder Configuration: Allows selection of the required battery arrangement.
- USB Type-C Input: Convenient charging from compatible USB power supplies.
- Up to 1.5A Charging: Programmable charging current depending on the onboard settings and available input power.
- 15W Charging Controller: IP2326 synchronous boost charging architecture.
- CC/CV Charging: Constant-current and constant-voltage charging management.
- Fast-Charge Support: Compatible with supported QC charging adapters.
- 2S Cell Balancing: Supports midpoint monitoring and balancing in 2S configuration.
- Compact PCB: Suitable for robotics, portable electronics and custom battery charging systems.
Technical Specifications
| Specification | Details |
|---|---|
| PCB Model | LX-LISC |
| Charging Controller | IP2326 |
| Product Type | Lithium Battery Boost Charger |
| Battery Configuration | Selectable 2S / 3S |
| Compatible Batteries | Li-ion / LiPo |
| 2S Nominal Voltage | 7.4V |
| 2S Charging Voltage | 8.4V |
| 3S Nominal Voltage | 11.1V |
| 3S Charging Voltage | 12.6V |
| Standard Input | 5V DC |
| Charging Input | USB Type-C / VIN Pads |
| Maximum Charging Power | 15W |
| Charging Current Capability | Up to 1.5A |
| Charging Method | CC/CV |
| Configuration Method | PCB Solder Settings |
| 2S Balancing | Supported |
| 3S Balancing | External BMS Required |
| Board Colour | Black |
How to Select 2S or 3S Charging Mode
The module provides a configurable charging arrangement.
2S Configuration – 8.4V
Suitable for two standard lithium-ion cells connected in series.
- Nominal battery voltage: 7.4V
- Full-charge voltage: 8.4V
- Cell configuration: 2S
- Series-selection jumper: Open
- Intermediate cell connection: Used for 2S balancing
3S Configuration – 12.6V
Suitable for three standard lithium-ion cells connected in series.
- Nominal battery voltage: 11.1V
- Full-charge voltage: 12.6V
- Cell configuration: 3S
- Series-selection jumper: Bridged
- Battery connections: Pack positive and negative
- External 3S BMS required for cell balancing and protection
Configuration Note: On certain LX-LISC board revisions, converting from 2S to 3S also requires removing the adjacent 180kΩ configuration resistor. Check the PCB configuration before applying power.
Always disconnect the battery and charging supply before changing solder settings.
Applications
1. Rechargeable 18650 Battery Packs
Build rechargeable 2S or 3S battery charging systems using compatible lithium-ion cells.
DIYGH stocks 18650 Li-ion Rechargeable Batteries 3.7V 2500mAh for suitable battery-powered electronics projects.
2. Robotics and Automation
Provide USB-C charging for rechargeable robotics systems and portable controllers using compatible 7.4V or 11.1V lithium battery packs.
3. Portable Electronics
Integrate charging functionality into portable electronic equipment, small audio systems and custom rechargeable devices.
4. DIY Battery Charging Projects
Build compact charging circuits and demonstrate selectable battery configurations, voltage boosting and lithium battery management.
5. Electronics Education
Study battery series connections, charging voltage regulation, CC/CV charging and switching power conversion.
Battery Connection Guide
The module provides the following connection points:
| Terminal | Function |
|---|---|
| USB Type-C | Charging power input |
| VIN | Alternative positive input |
| GND | Input ground |
| B+ | Battery pack positive |
| B- | Battery pack negative |
| BM | Intermediate cell connection for 2S balancing |
| NTC | Battery temperature-sensing input |
For a 2S arrangement, the BM connection is used to monitor the midpoint of the two-cell pack.
For a 3S arrangement, the module does not provide individual balancing connections for all three cells. A suitable external 3S BMS is therefore necessary.
Battery Protection and Safety
The charging module controls battery charging but does not replace a complete battery management system.
For 2S battery projects, DIYGH stocks the 2S 13A Lithium Battery BMS.
Use a properly matched 3S BMS when charging three cells in series.
Important precautions:
- Select the correct charging configuration before connecting the battery.
- Never connect a 3S pack while the module is configured for 2S charging.
- Do not use this module for LiFePO4 battery packs.
- Ensure the charging current is within the battery manufacturer’s permitted limits.
- Verify all battery connections and polarity before applying power.
- Use appropriate battery protection and correctly rated wiring.
- Do not modify solder settings while power is connected.
- Never charge damaged or swollen lithium batteries.
- Charge in a suitable fire-resistant location and do not leave charging unattended.
You can verify battery voltage and check connections using the ANENG XL830L Digital Multimeter.
Package Includes
- 1 x 2S/3S Type-C Lithium Battery Charger Module (IP2326)
Battery cells, USB cable, power adapter and BMS are not included.
Available from DIYGH Tech Hub, Apatrapa Junction, Kumasi, Ghana, for rechargeable electronics, robotics, battery charging and engineering projects.
Related products
1-Slot 18650 Battery Holder Case
12V 2A AC to DC Power Adapter
2-Slot 18650 Battery Holder Case
3S 40A 18650 Lithium Battery BMS Protection Board
4S 40A 18650 Lithium Battery BMS
5V 3A AC to DC Power Adapter, 15W
Compact 5V 3A AC to DC power adapter for electronics, development boards, audio modules and DIY projects. It delivers up to 15W of regulated 5V power and is suitable for devices requiring up to 3A.
Input: 100 to 240V AC
Output: 5V DC
Maximum Current: 3A
Maximum Power: 15W
Polarity: Centre Positive
Plug Type: European 2-pin
Best For: Arduino, LED, audio, routers and 5V electronics

Reviews
There are no reviews yet.