DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Original price was: ₵40.00.₵38.00Current price is: ₵38.00.
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor. Encased in a stainless steel tube, it is perfect for measuring water, soil, or air temperature in harsh environments.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
5 in stock
The DS18B20 Waterproof Temperature Probe is a high-precision digital sensor designed for accurate temperature measurement in liquids, air, and harsh environments. Featuring a fully waterproof stainless steel casing, this probe is ideal for Arduino, Raspberry Pi, ESP8266, and industrial IoT applications.
🔹 One-Wire Communication for Easy Integration & Multiple Sensors ⚡
✔ Temperature Range: -55°C to +125°C (±0.5°C accuracy between -10°C and +85°C).
✔ Communication Protocol: One-Wire (Supports multiple sensors on a single data line).
✔ Waterproof Stainless Steel Probe: Ideal for wet & outdoor environments.
✔ Operating Voltage: 3.0V – 5.5V (Compatible with Arduino & Raspberry Pi).
✔ Cable Length: 1m, 2m, or more (varies by model).
✔ Durability: Resistant to rust, corrosion, and harsh environmental conditions.
🔹 Applications – Where to Use the DS18B20 Waterproof Sensor 🛠️
✔ Liquid Temperature Monitoring – Measure water, oil, and chemical temperatures.
✔ Aquarium & Hydroponics Systems – Monitor fish tanks, ponds, and plant systems.
✔ Smart Home & IoT Projects – Automate temperature control in smart environments.
✔ Weather Stations & Outdoor Monitoring – Use in environmental sensing applications.
✔ Industrial & Lab Equipment – Measure accurate temperatures in harsh conditions.
🔹 How to Use & External Resources 📚
The DS18B20 sensor communicates via One-Wire protocol, allowing multiple sensors to run on a single data pin. It works with Arduino, Raspberry Pi, ESP32, and STM32 and requires a 4.7kΩ pull-up resistor for stable operation.
📖 Helpful Resources for DS18B20 Waterproof Temperature Probe:
✔ DS18B20 Datasheet & Pinout
✔ Arduino Guide for DS18B20
✔ Raspberry Pi DS18B20 Temperature Sensor Setup
✔ YouTube Tutorials – DS18B20 Sensor with Arduino & Raspberry Pi
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a DS18B20 Waterproof Temperature Probe in Ghana? Whether for liquid temperature monitoring, IoT automation, or weather stations, this high-accuracy, stainless steel sensor is a must-have. Order today for fast delivery across Ghana!
Related products
4×4 Matrix Membrane Keypad | 16 Button Keypad Module
-
Keys: 16 (0-9, A-D, *, #)
-
Mounting: Self-Adhesive Backing (Peel & Stick)
-
Interface: 8 Pins (Standard 2.54mm header)
-
Best For: Electronic Door Locks, Calculators, and Attendance Systems.
Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm - 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.