Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
Original price was: ₵14.00.₵12.00Current price is: ₵12.00.
Give your robot the ability to see fire. This sensor detects the specific infrared light wavelengths (760nm – 1100nm) emitted by flames. It is the essential “eye” for Fire Fighting Robots and home fire alarm projects.
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm – 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
5 in stock
The YG1006 Flame Sensor Module detects infrared light from open flames, making it ideal for fire detection systems, safety alarms, and industrial monitoring. Its high-sensitivity phototransistor ensures quick and accurate flame detection.
🔹 Fast Response & Wide Detection Range 🌍
This flame sensor module operates with a wavelength range of 760nm – 1100nm, allowing it to detect flames from a distance. Whether used for fire alarms, gas leak detection, or smart home safety, it provides fast and reliable performance.
🔹 Technical Specifications & Performance ⚡
✔ Operating Voltage: 3.3V – 5V
✔ Wavelength Range: 760nm – 1100nm
✔ Detection Angle: 60°
✔ Output Type: Digital (DO) & Analog (AO)
✔ Response Time: High-speed detection in milliseconds
✔ Indicator LEDs: Power and signal status indicators
✔ Comparator: On-board LM393 chip
✔ Dimension: 3.2cm x 1.4cm
✔ Compatible with: Arduino, Raspberry Pi, ESP8266, and other microcontrollers
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a YG1006 Flame Sensor Module in Ghana? YG1006 Flame Sensor is affordable and highly effective for fire detection, safety automation, and industrial applications. Order today and get fast delivery across Ghana!
🔹 Easy to Use & Integrate 🔌
Connect the flame sensor module to your Arduino, Raspberry Pi, or other microcontroller, adjust sensitivity, and start monitoring flames instantly. The plug-and-play design makes it perfect for both beginners and professionals.
Flame Sensor Module Resources:
Watch and learn how to use the YG1006 Flame Sensor Module.
You can use the this sensor with the Arduino, Get started with the Arduino Project Book.
Also, check the official page of the Arduino Official Arduino Tutorial Page
You can also buy the Arduino Uno R3 DIP version or the SMD version for your projects.
Related products
3×4 Matrix Membrane Keypad Module | 12 Button Numeric Pad
A simple and reliable input device for Arduino and DIY electronics projects. This flexible 12-key keypad provides only the essential keys (0–9, *, #)—no letters—making it ideal for numeric-only applications. It comes with a peel-and-stick adhesive backing for quick mounting on enclosures, panels, or doors.
-
Keys: 12 (Telephone-style layout)
-
Interface: 7 pins (2.54 mm standard pitch)
-
Mounting: Self-adhesive sticker backing
- Best for: Electronic door locks, vending machines, access control systems, phone dialers, and keypad-based Arduino projects.
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.