IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
Original price was: ₵18.00.₵16.00Current price is: ₵16.00.
The easiest way to drive 12V/24V loads. This breakout board allows your Arduino to control high-voltage devices like LED strips, DC motors, and solenoid valves using the IRF520 MOSFET. It features screw terminals for easy wiring—no soldering required!
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
10 in stock
The IRF520 MOSFET Driver Module is a compact and easy-to-use power switch for Arduino, Raspberry Pi, ESP8266, and microcontroller-based projects. Designed to control high-power DC devices, it’s perfect for LED strips, motors, pumps, and solenoids while offering low heat dissipation and high efficiency.
The IRF520 is a “Standard” MOSFET, not a “Logic Level” one. When driven by an Arduino (5V), it does not open fully.Result: It works perfectly for light loads (LEDs, small fans, Solenoids). However, if you try to drive a heavy motor (>1A), the module will get HOT. For heavy currents, please use our IRLZ44N Logic Level Transistor instead.
🔹 Simple Control with Microcontrollers & PWM Support 🔄
This module allows low-power microcontrollers (3.3V or 5V logic) to control high-power DC loads (up to 24V, 5A) using Pulse Width Modulation (PWM). Ideal for brightness control, motor speed adjustments, and heating elements, it ensures smooth and precise power management.
🔹 Technical Specifications & Features ⚙️
✔ MOSFET Type: IRF520 N-Channel
✔ Operating Voltage: 3.3V – 5V logic input (compatible with Arduino & Raspberry Pi)
✔ Load Voltage: Up to 24V DC
✔ Maximum Load Current: Up to 5A (with heat dissipation)
✔ PWM Control: Yes (for LED dimming & motor speed control)
✔ Gate Trigger Voltage: 5V logic compatible
✔ Output Type: Open Drain (switches DC loads)
✔ Module Size: 33mm × 24mm (compact & breadboard-friendly)
✔ Compatibility: Works with Arduino, Raspberry Pi, ESP8266, ESP32, STM32, and other microcontrollers
🔹 Applications – Where to Use the IRF520 MOSFET Module 🛠️
✔ LED & Light Strip Dimming – Control high-power LEDs and RGB strips.
✔ DC Motor & Fan Speed Control – Adjust speed using PWM signals.
✔ Heating Elements & Peltier Modules – Ideal for temperature regulation projects.
✔ Battery & Power Management – Efficient switching for solar panels & battery circuits.
✔ Solenoid & Relay Control – Power valves, electromagnets, and actuators.
🔹 How to Use & External Resources 📚
Using the IRF520 module is simple:
- Connect the VCC (5V) & GND to your microcontroller.
- Attach the logic input (SIG) to a PWM pin on Arduino, Raspberry Pi, or ESP8266.
- Connect your DC load (motor, LED, heater) to the output terminals.
📖 Helpful Resources for IRF520 MOSFET Driver Module:
✔ IRF520 MOSFET Datasheet
✔ Arduino MOSFET Switching Guide
✔ PWM Control with Raspberry Pi & MOSFETs
✔ YouTube Tutorials – IRF520 MOSFET Driver Module Projects
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for an IRF520 MOSFET Driver Module in Ghana? Whether for motor control, LED dimming, or power regulation, this module is affordable, efficient, and easy to integrate. Order today for fast delivery across Ghana!
Related products
3×4 Matrix Membrane Keypad Module | 12 Button Numeric Pad
A simple and reliable input device for Arduino and DIY electronics projects. This flexible 12-key keypad provides only the essential keys (0–9, *, #)—no letters—making it ideal for numeric-only applications. It comes with a peel-and-stick adhesive backing for quick mounting on enclosures, panels, or doors.
-
Keys: 12 (Telephone-style layout)
-
Interface: 7 pins (2.54 mm standard pitch)
-
Mounting: Self-adhesive sticker backing
- Best for: Electronic door locks, vending machines, access control systems, phone dialers, and keypad-based Arduino projects.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your "Dry" trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.
Reviews
There are no reviews yet.