IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
Original price was: ₵18.00.₵16.00Current price is: ₵16.00.
The easiest way to drive 12V/24V loads. This breakout board allows your Arduino to control high-voltage devices like LED strips, DC motors, and solenoid valves using the IRF520 MOSFET. It features screw terminals for easy wiring—no soldering required!
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
10 in stock
The IRF520 MOSFET Driver Module is a compact and easy-to-use power switch for Arduino, Raspberry Pi, ESP8266, and microcontroller-based projects. Designed to control high-power DC devices, it’s perfect for LED strips, motors, pumps, and solenoids while offering low heat dissipation and high efficiency.
The IRF520 is a “Standard” MOSFET, not a “Logic Level” one. When driven by an Arduino (5V), it does not open fully.Result: It works perfectly for light loads (LEDs, small fans, Solenoids). However, if you try to drive a heavy motor (>1A), the module will get HOT. For heavy currents, please use our IRLZ44N Logic Level Transistor instead.
🔹 Simple Control with Microcontrollers & PWM Support 🔄
This module allows low-power microcontrollers (3.3V or 5V logic) to control high-power DC loads (up to 24V, 5A) using Pulse Width Modulation (PWM). Ideal for brightness control, motor speed adjustments, and heating elements, it ensures smooth and precise power management.
🔹 Technical Specifications & Features ⚙️
✔ MOSFET Type: IRF520 N-Channel
✔ Operating Voltage: 3.3V – 5V logic input (compatible with Arduino & Raspberry Pi)
✔ Load Voltage: Up to 24V DC
✔ Maximum Load Current: Up to 5A (with heat dissipation)
✔ PWM Control: Yes (for LED dimming & motor speed control)
✔ Gate Trigger Voltage: 5V logic compatible
✔ Output Type: Open Drain (switches DC loads)
✔ Module Size: 33mm × 24mm (compact & breadboard-friendly)
✔ Compatibility: Works with Arduino, Raspberry Pi, ESP8266, ESP32, STM32, and other microcontrollers
🔹 Applications – Where to Use the IRF520 MOSFET Module 🛠️
✔ LED & Light Strip Dimming – Control high-power LEDs and RGB strips.
✔ DC Motor & Fan Speed Control – Adjust speed using PWM signals.
✔ Heating Elements & Peltier Modules – Ideal for temperature regulation projects.
✔ Battery & Power Management – Efficient switching for solar panels & battery circuits.
✔ Solenoid & Relay Control – Power valves, electromagnets, and actuators.
🔹 How to Use & External Resources 📚
Using the IRF520 module is simple:
- Connect the VCC (5V) & GND to your microcontroller.
- Attach the logic input (SIG) to a PWM pin on Arduino, Raspberry Pi, or ESP8266.
- Connect your DC load (motor, LED, heater) to the output terminals.
📖 Helpful Resources for IRF520 MOSFET Driver Module:
✔ IRF520 MOSFET Datasheet
✔ Arduino MOSFET Switching Guide
✔ PWM Control with Raspberry Pi & MOSFETs
✔ YouTube Tutorials – IRF520 MOSFET Driver Module Projects
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for an IRF520 MOSFET Driver Module in Ghana? Whether for motor control, LED dimming, or power regulation, this module is affordable, efficient, and easy to integrate. Order today for fast delivery across Ghana!
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your microcontroller from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor. Encased in a stainless steel tube, it is perfect for measuring water, soil, or air temperature in harsh environments.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your "Dry" trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.
Reviews
There are no reviews yet.