JSN-SR04T Waterproof Ultrasonic Sensor Module
Original price was: ₵110.00.₵95.00Current price is: ₵95.00.
The JSN-SR04T Waterproof Ultrasonic Sensor Module is ideal for distance measurement, water level monitoring, smart dustbin systems, obstacle detection and outdoor Arduino or ESP32 projects. It comes with a waterproof ultrasonic probe, making it suitable for projects exposed to moisture, tanks and outdoor environments.
5 in stock
The JSN-SR04T Waterproof Ultrasonic Sensor Module is a reliable distance measurement sensor designed for Arduino, ESP32, Raspberry Pi and other microcontroller projects. It works like the popular HC-SR04 ultrasonic sensor but comes with a waterproof probe, making it better suited for water level monitoring, outdoor measurement and harsh environment applications.
This sensor is commonly used in smart dustbins, automatic water tank monitoring systems, robotics, obstacle detection, liquid level measurement, parking assist systems and IoT-based monitoring projects. The separate waterproof probe allows the sensing head to be placed near water, tanks or outdoor surfaces while the control board remains protected inside an enclosure.
For students, STEM facilitators, electronics hobbyists and project builders, the JSN-SR04T is a good choice for learning non-contact distance measurement. It can detect objects without physical contact and can be easily connected to Arduino or ESP32 using trigger and echo pins.
The module is especially useful for projects where a normal HC-SR04 sensor may fail due to moisture exposure. It is suitable for water tank level projects, smart irrigation systems, flood level monitoring, outdoor automation and embedded distance sensing applications.
Key Features:
- Waterproof ultrasonic sensing probe
- Suitable for Arduino, ESP32 and Raspberry Pi projects
- Ideal for water level monitoring
- Good for outdoor and moisture-prone projects
- Non-contact distance measurement
- Separate probe and control board design
- Suitable for smart dustbin systems
- Works well for robotics and obstacle detection
- Easy to interface with microcontrollers
- Useful for STEM and school electronics projects
Technical Specifications:
- Sensor Type: Waterproof ultrasonic distance sensor
- Model: JSN-SR04T
- Operating Voltage: 5V DC
- Measuring Range: approximately 20cm to 450cm or more, depending on version
- Ultrasonic Frequency: 40kHz
- Interface: Trigger and Echo
- Probe Type: Waterproof ultrasonic transducer
- Cable Length: approximately 2.5m
- Compatible Boards: Arduino, ESP32, Raspberry Pi and other microcontrollers
- Application: Distance measurement and level sensing
Pin Description:
- VCC: 5V power supply
- GND: Ground
- TRIG: Trigger input pin
- ECHO: Echo output pin
Applications:
- Water tank level monitoring
- Smart dustbin projects
- Automatic water level systems
- Smart irrigation projects
- Outdoor distance measurement
- Obstacle detection
- Robotics projects
- Parking assist systems
- Flood level monitoring
- IoT monitoring systems
- STEM and school practical projects
- Arduino and ESP32 automation projects
Recommended For:
- Arduino water level projects
- ESP32 IoT monitoring systems
- Smart dustbin prototypes
- Automatic water tank controllers
- Outdoor sensor projects
- Robotics and obstacle detection
- STEM project work
- Final year electronics projects
Important Note:
Only the ultrasonic probe is waterproof. The control board is not waterproof and should be placed inside a protected enclosure when used outdoors or near water.
Related products
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
The easiest way to drive 12V/24V loads. This breakout board allows your Arduino to control high-voltage devices like LED strips, DC motors, and solenoid valves using the IRF520 MOSFET. It features screw terminals for easy wiring—no soldering required!
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
Make your project react to light. This sensor detects the brightness of the environment. Unlike the 3-pin version, this 4-Pin Module gives you both a Digital Output (to trigger a switch) and an Analog Output (to measure exact brightness). Perfect for automatic streetlights and solar trackers.
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
Build your own Fire & Gas Leak Alarm. The MQ-2 is a dual-purpose safety sensor. It detects Smoke (from fires) and Combustible Gases (like LPG, Propane, and Butane). It is the standard module for building "Smart Kitchen" safety monitors.
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
Add Satellite Navigation to your project. This high-precision GPS module allows your Arduino, ESP32, or Drone to know its exact location, speed, and time. It comes with a detachable ceramic antenna and a built-in backup battery for fast "Hot Starts."
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your "Dry" trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
Detect motion, impacts, and theft. The SW-420 is a "Normally Closed" vibration sensor that triggers whenever it feels a shake. It features an onboard potentiometer to adjust sensitivity, making it perfect for sensitive projects like door alarms or earthquake detectors.
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.