L298N Dual H-Bridge Motor Driver Module
₵40.00
The muscle behind your robot. The L298N allows your Arduino to control two DC motors (Speed & Direction) or one Stepper Motor. It is the standard driver for all “Smart Car” chassis kits, capable of handling higher voltages than the small L293D chips.
-
Drive Capability: 2 DC Motors or 1 Stepper Motor.
-
Voltage: 5V – 35V DC.
-
Current: 2A per channel (Max).
-
Heatsink: Large aluminum heatsink for cooling.
-
Best For: 2WD/4WD Robot Cars and High-Torque Motors.
29 in stock
The L298N Dual H-Bridge Motor Driver Module is a powerful and versatile motor controller designed to drive DC motors and stepper motors with precision. Featuring an integrated L298N chip, this module supports PWM speed control and bidirectional movement, making it ideal for robotics, smart car projects, automation systems, and CNC machines.
🔹 Dual H-Bridge Design for Independent Motor Control ⚡
✔ Motor Support: Drives two DC motors or one stepper motor.
✔ Operating Voltage: 5V – 35V (Logic level: 5V, Motor supply: 7V-35V).
✔ Current Handling: Up to 2A per channel (with heatsink for better performance).
✔ PWM Speed Control: Adjust motor speed with pulse width modulation.
✔ Bidirectional Control: Forward, reverse, stop, and braking functions.
✔ Built-in Protection: Overheat & short-circuit protection for durability.
✔ Enable Pins for Custom Control: Easily control motor speed with external signals.
🔹 Applications – Where to Use the L298N Motor Driver Module 🛠️
✔ Arduino & Raspberry Pi Robotics – Control motors for smart car & automation projects.
✔ DIY CNC & 3D Printing – Power stepper motors with precise movement.
✔ Home Automation & IoT – Integrate motorized systems in home automation.
✔ Smart Vehicles & Drones – Perfect for building line-following robots & motorized cars.
✔ Industrial & Educational Projects – Used in engineering, STEM, and prototyping.
🔹 How to Use & External Resources 📚
The L298N Motor Driver connects to Arduino, ESP32, STM32, and Raspberry Pi through PWM signals. Control two DC motors independently or drive a stepper motor with dual H-Bridge outputs.
📖 Helpful Resources:
✔ L298N Datasheet & Pinout
✔ Arduino L298N Motor Driver Guide
✔ Raspberry Pi L298N Motor Control Tutorial
✔ YouTube Tutorials – L298N Motor Driver with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for an L298N Dual H-Bridge Motor Driver Module in Ghana? Whether for robotics, automation, or smart vehicle projects, this powerful and reliable motor driver is a must-have. Order today for fast delivery across Ghana!
Related products
1-Channel 12V Relay Module | For Car Electronics & Solar Projects
The standard relay for 12V systems. Unlike the standard 5V Arduino relay, this module is designed to run directly on 12V power. It is perfect for automotive projects, car security systems, and solar setups where only 12V is available.
-
Coil Voltage: 12V DC.
-
Trigger: Low Level (Connect Signal to GND to switch ON).
-
Max Load: 250V AC / 10A.
-
Best For: Car Alarms, Central Locks, Horns, and Solar Inverters.
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your microcontroller from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
4-Channel 5V Relay Module | Optocoupler Isolated for Arduino
Control 4 appliances with one board. This module contains 4 separate relays, allowing your Arduino or ESP32 to switch up to 4 high-voltage devices ON and OFF. It features Optocoupler isolation to protect your microcontroller from electrical noise and surges.
-
Channels: 4 Independent Relays.
-
Trigger: Low Level (Connect Input to GND to switch ON).
-
Load Capacity: 10A @ 250V AC / 10A @ 30V DC.
-
Best For: Home Automation, Smart Switches, and Industrial Control.
DC 12V Brushless Submersible Water Pump – 3M Lift, 240L/H Ultra-Quiet Performance
The DC 12V Brushless Submersible Water Pump delivers 240L/H water flow with up to 3 meters lift in an ultra-quiet, compact design. Ideal for aquariums, hydroponics, fountains, cooling systems, and Arduino-based automation, it features a durable brushless motor and waterproof construction. Perfect for DIY and smart water projects in Ghana.
Flexible Water Pump Hose (1 Meter) | 8mm PVC Tubing for Mini Pumps
The perfect fit for your mini water pump. This clear vinyl tubing is sized specifically to fit the "Mini Submersible Pumps" used in Arduino projects. It is flexible, non-toxic, and fits tightly so you don't need clamps.
-
Length: 1 Meter (Sold per meter)
-
Inner Diameter: 6mm (Fits pump nozzle perfectly)
-
Outer Diameter: 8mm
-
Material: Flexible PVC
-
Best For: Automatic watering systems and aquarium pumps.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
The easiest way to drive 12V/24V loads. This breakout board allows your Arduino to control high-voltage devices like LED strips, DC motors, and solenoid valves using the IRF520 MOSFET. It features screw terminals for easy wiring—no soldering required!
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
SG90 Micro Servo Motor 9g (180°) – Arduino & RC Robot Arm Compatible
The SG90 is the most popular lightweight servo for beginners and pros alike. Perfect for controlling small mechanisms in robotics.
-
Weight: 9g (Lightweight)
-
Rotation: 0° – 180°
-
Gears: Nylon (Smooth operation)
-
Torque: 1.6kg/cm (4.8V)
-
Operating Voltage: 3.0V – 7.2V (Optimized for 5V)
-
Application: Robot Arms, Grippers, RC Plane Flaps
Reviews
There are no reviews yet.