MG996R 360° Continuous Rotation Servo Motor | High Torque Metal Gear
₵92.00 Original price was: ₵92.00.₵80.00Current price is: ₵80.00.
The muscle for your heavy-duty robot. Unlike standard servos that stop at 180 degrees, this 360° Continuous Rotation version spins freely like a wheel. It combines the high torque of a servo with the continuous motion of a DC motor.
-
Gears: Full Metal (Brass/Aluminum)
-
Torque: 11kg/cm (Very Strong)
-
Type: 360° Continuous (Acts like a DC Motor)
-
Best For: Robot wheels, conveyor belts, and winches.
2 in stock
The MG996R Servo Motor (Metal-Geared) is a high-torque, full-rotation servo designed for robotics, automation, RC vehicles, and industrial applications. Built with metal gears for durability and precision, this servo provides smooth 360° continuous rotation, making it ideal for motorized wheels, robotic arms, and smart automation systems.
🔹 Durable Metal Gears & High-Torque Performance 🔄
✔ Rotation: 360° Continuous Rotation (Not Position-Based)
✔ Torque: 9.4kg/cm at 4.8V | 11kg/cm at 6V (High torque for heavy loads)
✔ Operating Voltage: 4.8V – 7.2V (Supports a wide power range)
✔ Gears: Full metal gear system for enhanced durability
✔ Speed: 0.17 sec/60° at 4.8V | 0.14 sec/60° at 6V
✔ PWM Control: Works with Arduino, Raspberry Pi, and microcontrollers
✔ Motor Type: Brushed DC motor with servo feedback
✔ Connector Type: 3-pin female (VCC, GND, PWM signal)
🔹 Package Includes – Everything You Need for Setup 📦
✔ 1 x MG996R Servo Motor (360° Metal-Geared)
✔ 1 x Set of Servo Horns (Arms) & Screws
🔹 Applications – Where to Use the MG996R Servo Motor 🛠️
✔ Robotic Arms & Smart Systems – Ideal for automated movement and robotic control.
✔ RC Vehicles & Drones – Controls steering, flaps, and dynamic movement.
✔ Conveyor Belts & Motorized Wheels – Perfect for automated industrial projects.
✔ Smart Home Automation – Used for automated doors, locks, and adjustable furniture.
✔ STEM & DIY Electronics – Great for students, makers, and prototyping.
🔹 How to Use & External Resources 📚
The MG996R servo motor connects easily to an Arduino, Raspberry Pi, or motor driver. Just connect the VCC (red), GND (brown), and PWM signal (orange) to control speed and direction using PWM signals.
📖 Helpful Resources:
✔ MG996R Servo Motor Datasheet & Specs
✔ Arduino MG996R Servo Control Guide
✔ Raspberry Pi Continuous Rotation Servo Tutorial
✔ YouTube Tutorials – MG996R Servo Motor Applications
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for an MG996R 360° Metal-Geared Servo Motor in Ghana? Whether for robotics, automation, or RC vehicles, this servo provides high torque, smooth rotation, and durable performance. Order today for fast delivery across Ghana!
Related products
4-Channel 5V Relay Module | Optocoupler Isolated for Arduino
-
Channels: 4 Independent Relays.
-
Trigger: Low Level (Connect Input to GND to switch ON).
-
Load Capacity: 10A @ 250V AC / 10A @ 30V DC.
-
Best For: Home Automation, Smart Switches, and Industrial Control.
Arduino Uno R3 Ultimate Starter Kit | RFID Learning Suite
DC 12V Brushless Submersible Water Pump – 3M Lift, 240L/H Ultra-Quiet Performance
ESP32-S3 N8R2 Development Board (Dual USB-C, 44-Pin, 8MB Flash + 2MB PSRAM)
Flexible Water Pump Hose (1 Meter) | 8mm PVC Tubing for Mini Pumps
The perfect fit for your mini water pump. This clear vinyl tubing is sized specifically to fit the "Mini Submersible Pumps" used in Arduino projects. It is flexible, non-toxic, and fits tightly so you don't need clamps.
-
Length: 1 Meter (Sold per meter)
-
Inner Diameter: 6mm (Fits pump nozzle perfectly)
-
Outer Diameter: 8mm
-
Material: Flexible PVC
-
Best For: Automatic watering systems and aquarium pumps.
L298N Dual H-Bridge Motor Driver Module
-
Drive Capability: 2 DC Motors or 1 Stepper Motor.
-
Voltage: 5V - 35V DC.
-
Current: 2A per channel (Max).
-
Heatsink: Large aluminum heatsink for cooling.
-
Best For: 2WD/4WD Robot Cars and High-Torque Motors.
Mini Submersible Water Pump 3V-5V | Horizontal Motor for Arduino
Build your own automatic watering system. This compact submersible pump is designed to move water quietly and efficiently. Perfect for Arduino irrigation projects, small aquariums, and desktop fountains.
-
Voltage: 3V to 5V DC (USB Compatible)
-
Flow Rate: 80-120 Liters/Hour
-
Outlet Diameter: 7.5mm (Fits our 6mm/8mm PVC Hose perfectly)
-
Type: Submersible (Must be under water to work)

Reviews
There are no reviews yet.