Raindrop Sensor Module | Rain & Water Detector for Arduino
₵16.00
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
4 in stock
The Raindrop Sensor Module is a high-sensitivity water detection sensor designed to detect rainfall, moisture levels, and water leakage. Featuring both analog and digital outputs, this sensor is ideal for weather monitoring, smart irrigation systems, and flood detection. Compatible with Arduino, Raspberry Pi, ESP8266, and IoT projects, it helps automate rain-based triggers and alerts.
🔹 Dual Output for Precise Rain Detection & Automation ⚡
✔ Analog Output (AO): Provides real-time moisture level readings.
✔ Digital Output (DO): Threshold-based HIGH/LOW signal for automation.
✔ Adjustable Sensitivity: Built-in potentiometer for fine-tuning water detection.
✔ Operating Voltage: 3.3V – 5V (Compatible with Arduino, ESP32, and Raspberry Pi).
✔ Corrosion-Resistant Probe: Ensures durability in outdoor conditions.
✔ Power Efficiency: Low power consumption for battery-powered IoT applications.
🔹 Applications – Where to Use the Raindrop Sensor Module 🛠️
✔ Smart Irrigation Systems – Trigger watering systems based on rainfall detection.
✔ Weather Monitoring Stations – Measure rain intensity for forecasting applications.
✔ IoT & Home Automation – Automate roof windows, awnings, and outdoor equipment.
✔ Flood & Water Leak Detection – Alerts users in case of excessive water accumulation.
✔ Agricultural & Greenhouse Monitoring – Enhance crop management with real-time data.
🔹 How to Use & External Resources 📚
The Raindrop Sensor Module connects easily to Arduino, Raspberry Pi, and microcontrollers. Simply place the sensor pad in an open environment, connect VCC, GND, AO, and DO, and start measuring water levels with simple code and libraries.
📖 Helpful Resources for Raindrop Sensor Module:
✔ Arduino Rain Sensor Setup Guide
✔ Raspberry Pi Rain Detection Project
✔ YouTube Tutorials – Raindrop Sensor with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a Raindrop Sensor Module (Water Detection) in Ghana? Whether for weather stations, irrigation control, or home automation, this high-accuracy sensor is a must-have. Order today for fast delivery across Ghana!
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your microcontroller from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
16×2 LCD Display Module (Blue Backlight) – HD44780 Arduino Compatible
The classic 1602 Character LCD provides a bright 16-character by 2-line display, essential for user interfaces in electronics projects.
-
Display: 16 Characters x 2 Lines
-
Color: White Text on Blue Background
-
Controller: HD44780 (Standard Library Support)
-
Voltage: 5V DC
-
Interface: Parallel (4-bit or 8-bit)
-
Backlight: LED
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your "Dry" trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.