Thermal Fuse 216°C 10A 250V (SF214E)
₵5.00
The Thermal Fuse 216°C 10A 250V (SF214E) is a one-time temperature safety device that disconnects electrical power when abnormal overheating occurs. Designed for compatible rice cookers, electric kettles and other heating appliances, it provides essential overtemperature protection.
50 in stock
The Thermal Fuse 216°C (SF214E) is a temperature-sensitive electrical safety component designed to permanently interrupt a circuit when excessive heat reaches its rated operating temperature.
Rated at 216°C, 10A and 250V AC, this thermal cutoff fuse is used in compatible rice cookers, electric kettles, coffee makers and other heating appliances to protect against abnormal overheating.
Its compact cylindrical metal body and axial wire leads make it suitable for installation in appliance heating circuits where a one-time thermal safety device is required.
Key Features
- 216°C Thermal Cutoff: Permanently opens the electrical circuit when the specified overtemperature condition is reached.
- 10A Current Rating: Designed for compatible AC circuits carrying up to 10A.
- 250V AC Rating: Suitable for appropriately rated mains-powered appliances.
- One-Time Protection: Provides permanent disconnection after activation.
- Normally Closed: Allows current to flow during normal operating conditions.
- Axial Lead Design: Two metal leads for secure electrical connection.
- Compact Metal Housing: Suitable for installation in space-limited appliance assemblies.
- No Polarity: Can be connected in either direction within the circuit.
Technical Specifications
| Specification | Details |
|---|---|
| Model | SF214E |
| Component Type | Thermal Cutoff Fuse |
| Rated Functioning Temperature | 216°C |
| Rated Current | 10A |
| Rated Voltage | 250V AC |
| Contact State | Normally Closed |
| Protection Type | One-Time Thermal Cutoff |
| Resettable | No |
| Mounting Style | Axial Lead |
| Number of Terminals | 2 |
| Housing | Cylindrical Metal Body |
| Polarity | Non-Polarised |
| Main Application | Appliance Overtemperature Protection |
Applications
1. Rice Cooker Repairs
The SF214E thermal fuse is suitable for replacing a failed 216°C thermal cutoff in compatible electric rice cookers.
It helps interrupt the supply when an abnormal temperature rise occurs, providing an additional safety measure in the heating system.
2. Electric Kettles
Used in compatible kettle heating circuits that require a 216°C one-time thermal safety device.
3. Coffee Makers
Provides overtemperature protection in suitable coffee makers and electrical heating assemblies.
4. Electric Cooking Appliances
Suitable for compatible electric cooking equipment where the original manufacturer specifies a thermal cutoff with matching temperature, voltage and current ratings.
5. Heating Equipment Repairs
Can be used in other suitably designed heating appliances requiring an SF214E-type thermal cutoff.
How the Thermal Fuse Works
A thermal fuse is normally closed, allowing electricity to flow through the appliance during normal operation.
When an abnormal temperature rise causes the fuse to reach its rated functioning temperature, the internal thermal mechanism permanently opens the circuit.
This interrupts the electrical supply to the protected equipment.
Unlike a thermostat, the fuse does not automatically reconnect when the appliance cools down.
Once activated, the thermal fuse must be replaced.
How to Check a Thermal Fuse
A thermal fuse can be tested using a multimeter.
- Disconnect the appliance completely from its power supply.
- Allow the appliance to cool.
- Have a qualified technician isolate the fuse from the circuit.
- Check continuity across the two terminals.
A functional, unactivated fuse normally has electrical continuity. A triggered fuse will show an open circuit.
For testing, DIYGH stocks the ANENG XL830L Digital Multimeter, which includes a continuity testing function.
Important Installation and Safety Information
- Replace a failed thermal fuse only with one matching the appliance manufacturer’s specified temperature and electrical ratings.
- Identify and correct the cause of overheating before fitting a replacement.
- Never bypass or short-circuit a thermal fuse.
- The fuse must be installed in its designated thermal sensing position to provide the intended protection.
- Use appropriate crimped connections and heat-resistant insulation according to the appliance design.
- Avoid applying soldering heat directly to the fuse, as excessive heat can damage or prematurely activate it.
- Never substitute a thermal fuse for a conventional overcurrent fuse.
- Repairs involving mains-powered heating appliances should be performed by a qualified technician.
Thermal Fuse vs Thermostat
A thermal fuse is a one-time safety component. Once excessive temperature causes it to open, it remains disconnected permanently.
A thermostat is designed to control temperature during normal appliance operation and can switch repeatedly.
The SF214E is intended for thermal protection, not routine temperature regulation.
Package Includes
- 1 x SF214E Thermal Fuse 216°C 10A 250V
Available from DIYGH Tech Hub, Apatrapa Junction, Kumasi, Ghana, for appliance repairs and electronic maintenance.
Related products
5mm LED Light Emitting Diode – Multiple Colours
The 5mm LED Light Emitting Diode is a compact, energy-efficient electronic component used for visual indicators, Arduino projects, circuit testing, robotics, electronic displays and DIY lighting applications.
Available in Red, Green, Blue, Yellow, White and Orange, these two-pin through-hole LEDs are ideal for students, electronics hobbyists, STEM facilitators and circuit developers.
Select your preferred colour for your project.
BC557 PNP Transistor
DC Power Socket DC-005C 3.5×1.35mm 3-Pin
The DC-005C 3.5x1.35mm 3-Pin DC Power Socket is a compact female barrel jack for low-voltage electronic devices, circuit boards and equipment repairs. It features a right-angle housing, three metal solder terminals and a switched contact for compatible power input circuits.
Key Features
- Model: DC-005C
- Connector size: 3.5x1.35mm
- 3-pin female DC power socket
- Right-angle horizontal configuration
- Built-in switched contact
- Black insulated housing
- Suitable for electronic repairs, DC power inputs and compact DIY circuits
DC Power Socket DC-022B 5.5×2.1mm Gold-Plated
The DC-022B 5.5x2.1mm Gold-Plated DC Power Socket is a compact, panel-mount female barrel connector for electronics projects, power supply connections and equipment repairs. It features gold-plated contact surfaces, a durable black insulated body, two solder terminals and a threaded mounting design with a metal fixing nut.
Key Features
- Model: DC-022B
- Connector size: 5.5mm outer x 2.1mm inner
- Contact finish: Gold-plated
- Terminals: 2 solder lugs
- Mounting: Threaded panel mount with hex nut
- Suitable for low-voltage DC electronics, project enclosures and repairs
Female DC Power Socket – 5.5×2.1mm Threaded Panel Mount
Threaded 5.5×2.1mm female DC power socket for secure panel mounting in electronics and DIY projects. The all-copper contact design and three solder terminals make it suitable for power inputs, battery projects and custom electronic enclosures.
Connector: 5.5 × 2.1mm
Type: Female DC Socket
Terminals: 3
Mounting: Threaded panel mount
Contacts: Copper
Termination: Solder lug
Best For: Power supplies, project boxes, Arduino, audio and battery-powered electronics
FM Stereo Radio Receiver Module (RDA5807M RRD-102 V2.0)
Mini Rocker Switch KCD11-101 2-Pin ON/OFF 10x15mm
The KCD11-101 Mini Rocker Switch is a compact 10x15mm, 2-pin ON/OFF power switch designed for electronic equipment, DIY projects, small appliances and control panels. It features a snap-in mounting design, two metal terminals and a maintained switching mechanism for convenient power control.
Available Colours: White, Red and Black
SS12D00G4 Mini 3-Pin SPDT Slide Switch – 2 Position
Compact 3-pin SPDT slide switch for breadboards, PCBs and low-power electronic projects. The SS12D00G4 features two switching positions and standard 2.54mm pin spacing for easy integration into DIY circuits.
Type: SPDT / 1P2T
Positions: 2
Pins: 3
Pin Pitch: 2.54mm
Mounting: Through-hole
Typical Rating: Up to 0.2A at 30V DC
Best For: Arduino projects, PCB circuits, mode selection and low-power switching

Reviews
There are no reviews yet.