Showing 46–60 of 71 results

Show sidebar
Clear filters
SW-1801P Vibration Sensor Module
-17%

High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch

Original price was: ₵30.00.Current price is: ₵25.00.

Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.

  • Sensor Type: SW-1801P (High Sensitivity Spring).

  • Output: Digital (High/Low).

  • Adjustable: Blue Potentiometer to set sensitivity trigger.

  • Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.

Add to wishlist
-8%

INMP441 I2S MEMS Microphone Module

Original price was: ₵65.00.Current price is: ₵60.00.

The INMP441 I2S MEMS Microphone Module is a compact digital microphone for ESP32, Arduino, IoT, voice recognition, sound detection and audio recording projects. It provides clear digital audio output through the I2S interface, making it ideal for smart devices, voice-controlled systems and embedded audio applications.

Add to wishlist
Infrared IR obstacle avoidance sensor
-6%

IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino

Original price was: ₵16.00.Current price is: ₵15.00.

Teach your robot to see. This sensor emits infrared light and detects reflections to see if an object is in front of it. It is the essential component for building "Obstacle Avoiding Robots" and simple security alarms.

  • Detection Range: 2cm - 30cm (Adjustable).

  • Output: Digital Signal (LOW when obstacle detected).

  • Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.

  • Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.

Add to wishlist
IRF520 MOSFET Driver Module main
-11%

IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller

Original price was: ₵18.00.Current price is: ₵16.00.

The easiest way to drive 12V/24V loads. This breakout board allows your Arduino to control high-voltage devices like LED strips, DC motors, and solenoid valves using the IRF520 MOSFET. It features screw terminals for easy wiring—no soldering required!

  • Max Load: 24V DC / < 5A.

  • Control Voltage: 3.3V or 5V (PWM Compatible).

  • Output: Pulse Width Modulation (Speed/Dimming control).

  • Best For: LED Strips, Small DC Fans, and Solenoids.

Add to wishlist
JSN-SR04T waterproof ultrasonic sensor module for Arduino water level projects in Ghana
-14%

JSN-SR04T Waterproof Ultrasonic Sensor Module

Original price was: ₵110.00.Current price is: ₵95.00.

The JSN-SR04T Waterproof Ultrasonic Sensor Module is ideal for distance measurement, water level monitoring, smart dustbin systems, obstacle detection and outdoor Arduino or ESP32 projects. It comes with a waterproof ultrasonic probe, making it suitable for projects exposed to moisture, tanks and outdoor environments.

Add to wishlist
Buck Converter module (LM2596, LM2596S DC-DC Step Down) Main
-10%

LM2596 DC-DC Buck Converter Module | Adjustable Step-Down Regulator (3A)

Original price was: ₵20.00.Current price is: ₵18.00.

Drop high voltage down to what you need. The LM2596 is a high-efficiency "Step-Down" converter. It allows you to take a high voltage source (like a 12V battery or 24V solar panel) and reduce it to a specific lower voltage (like 5V or 3.3V) to power your electronics.

  • Input: 3V - 40V DC.

  • Output: 1.5V - 35V DC (Adjustable).

  • Current: Max 3A.

  • Best For: Powering Arduinos from 12V batteries, Solar Projects, and LED Drivers.

Add to wishlist
LM358 Dual Operational Amplifier
-38%

LM358 Dual Op-Amp IC | Low Power Operational Amplifier (DIP-8)

Original price was: ₵8.00.Current price is: ₵5.00.

The industry-standard chip for audio and signals. The LM358 contains two independent, high-gain operational amplifiers in a single 8-pin package. Unlike the older 741 Op-Amp, the LM358 is designed to work perfectly with a single power supply (like a battery).

  • Package: DIP-8 (Breadboard Friendly)

  • Supply Voltage: 3V to 32V

  • Best For: Pre-amplifiers, Active Filters, and Line Following Robots (Comparator).

Add to wishlist
Male to Female jumper wires 40pcs-20cm DuPont cable main
-11%

Male to Female Jumper Wires (40pcs) | 20cm Dupont Cable

Original price was: ₵18.00.Current price is: ₵16.00.

The ultimate bridge cable. These wires have a pin on one side and a socket on the other. They are the standard cable for connecting sensors (with pins) directly to your Arduino, or connecting a Raspberry Pi to a breadboard.

  • Quantity: 40 Wires (Peelable Ribbon)

  • Length: 20cm

  • Connectors: Male to Female

  • Best For: Raspberry Pi to Breadboard, IR Sensors to Arduino.

Add to wishlist
Male to male jumper wires 40pcs-20cm DuPont cable
-6%

Male to Male Jumper Wires (40pcs) | 20cm Dupont Cable for Breadboard

Original price was: ₵17.00.Current price is: ₵16.00.

The essential cables for every electronics project. This is a peelable ribbon of 40 multi-colored wires with male pins on both ends. Perfect for connecting your Arduino Uno directly to a breadboard without soldering.

  • Quantity: 40 Wires (Peelable Ribbon)

  • Length: 20cm (Standard)

  • Connectors: Male to Male

  • Best For: Breadboarding, Arduino prototyping, and testing circuits.

Add to wishlist
4 in 1 Dot Matrix LED Display (MAX7219 Red)
-23%

MAX7219 4-in-1 Dot Matrix LED Display Module | Red Scrolling Text

Original price was: ₵80.00.Current price is: ₵62.00.

Create your own digital sign board. This module combines four 8x8 LED matrices into a single display. It is pre-wired and ready to scroll text, numbers, and symbols using just 3 pins on your Arduino.

  • Resolution: 32 x 8 Pixels (Total 256 LEDs)

  • Color: Red

  • Interface: SPI (DIN, CS, CLK)

  • Best For: Digital clocks, scrolling message boards, and counters.

Add to wishlist
MAX98357A I2S 3W Class D amplifier module for ESP32 and Raspberry Pi in Ghana
-9%

MAX98357A I2S 3W Class D Amplifier Module

Original price was: ₵55.00.Current price is: ₵50.00.

The MAX98357A I2S 3W Class D Amplifier Module is a compact digital audio amplifier for ESP32, Arduino, Raspberry Pi, IoT, voice output and DIY speaker projects. It converts I2S digital audio into amplified speaker output, making it ideal for smart devices, voice assistants and embedded audio applications.

Add to wishlist
MG90S 180 degree all-metal gear micro servo motor for Arduino and robotics projects in Ghana
-5%

MG90S Servo Motor 180° Micro All-Metal Gear

Original price was: ₵40.00.Current price is: ₵38.00.

The MG90S 180° All-Metal Gear Micro Servo Motor is a compact, high-torque positional servo designed for Arduino, ESP32, robotics and RC projects. Featuring a durable all-metal gear system, 180° rotation and up to 2.2 kg·cm stall torque at 6V, it delivers precise angular movement for robotic arms, grippers, steering mechanisms and automated systems.

Add to wishlist
MG996R Servo Motor
-13%

MG996R 360° Continuous Rotation Servo Motor | High Torque Metal Gear

Original price was: ₵92.00.Current price is: ₵80.00.

The muscle for your heavy-duty robot. Unlike standard servos that stop at 180 degrees, this 360° Continuous Rotation version spins freely like a wheel. It combines the high torque of a servo with the continuous motion of a DC motor.

  • Gears: Full Metal (Brass/Aluminum)

  • Torque: 11kg/cm (Very Strong)

  • Type: 360° Continuous (Acts like a DC Motor)

  • Best For: Robot wheels, conveyor belts, and winches.

Add to wishlist
5V Mini Submersible Water Pump (Horizontal)
-4%

Mini Submersible Water Pump 3V-5V | Horizontal Motor for Arduino

Original price was: ₵28.00.Current price is: ₵27.00.

Build your own automatic watering system. This compact submersible pump is designed to move water quietly and efficiently. Perfect for Arduino irrigation projects, small aquariums, and desktop fountains.

  • Voltage: 3V to 5V DC (USB Compatible)

  • Flow Rate: 80-120 Liters/Hour

  • Outlet Diameter: 7.5mm (Fits our 6mm/8mm PVC Hose perfectly)

  • Type: Submersible (Must be under water to work)

Add to wishlist
MQ-3 Alcohol Ethanol Detection Sensor Module Main
-13%

MQ-3 Alcohol Sensor Module | Breathalyzer & Ethanol Detector

Original price was: ₵32.00.Current price is: ₵28.00.

Build your own Breathalyzer. The MQ-3 is specifically designed to detect alcohol (Ethanol) vapors. It has high sensitivity and fast response time, making it the perfect sensor for "Smart Car" safety systems that prevent drunk driving.

  • Detects: Alcohol, Ethanol, Benzine.

  • Sensitivity: Adjustable via Blue Potentiometer.

  • Warm-up: Heater requires ~20 seconds.

  • Best For: Breathalyzers, Drunk Driving Alarms, and Industrial Monitoring.

Add to wishlist