DIYgh Tech Store
Showing 16–30 of 39 results
Arduino Uno R3 Starter Kit (SMD Edition) | The Best Value Kit
Get the full kit for a student-friendly price. This is the "SMD Edition" of our popular RFID Learning Kit. It includes the exact same sensors, motors, and components as the standard kit, but uses the SMD version of the Arduino Uno board to save you money.
-
Board: Arduino Uno R3 (SMD Version - CH340)
-
Performance: 100% Identical to the expensive version.
-
Includes: RFID, Stepper Motor, Servo, LCD, and Box.
-
Best For: Students on a budget.
Arduino Uno R3 Ultimate Starter Kit | RFID Learning Suite
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor. Encased in a stainless steel tube, it is perfect for measuring water, soil, or air temperature in harsh environments.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
ESP32 WROOM-32 Development Board (30-Pin) – CP2102 WiFi + Bluetooth
The ultimate IoT controller. This 30-Pin version of the ESP32 fits perfectly on a breadboard, leaving one row of pins open for wiring (unlike the wide 38-pin version).
-
Chip: ESP-WROOM-32 (Dual Core 240MHz)
-
Pins: 30 Pins (Breadboard Friendly)
-
Driver: CP2102 (Plug-and-Play, no driver issues)
-
Connectivity: WiFi + Bluetooth Classic + BLE
-
Voltage: 5V (Micro USB) / 3.3V Logic
-
Touch Sensors: 10 Capacitive Touch GPIOs
Female to Female jumper wires 40pcs-20cm DuPont cable
Connect sensors directly to your board. These wires have female connectors on both ends, making them perfect for connecting pin headers to other pin headers. Essential for Raspberry Pi GPIOs and sensor modules.
-
Quantity: 40 Wires (Peelable Ribbon)
-
Length: 20cm
-
Connectors: Female to Female
-
Best For: Raspberry Pi, HC-SR04 Sensors, and Bluetooth Modules.
Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm - 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
LM2596 DC-DC Buck Converter Module | Adjustable Step-Down Regulator (3A)
-
Input: 3V - 40V DC.
-
Output: 1.5V - 35V DC (Adjustable).
-
Current: Max 3A.
-
Best For: Powering Arduinos from 12V batteries, Solar Projects, and LED Drivers.
LM358 Dual Op-Amp IC | Low Power Operational Amplifier (DIP-8)
The industry-standard chip for audio and signals. The LM358 contains two independent, high-gain operational amplifiers in a single 8-pin package. Unlike the older 741 Op-Amp, the LM358 is designed to work perfectly with a single power supply (like a battery).
-
Package: DIP-8 (Breadboard Friendly)
-
Supply Voltage: 3V to 32V
-
Best For: Pre-amplifiers, Active Filters, and Line Following Robots (Comparator).