HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Original price was: ₵22.00.₵20.00Current price is: ₵20.00.
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
9 in stock
Reliable Motion Detection with Infrared Technology 🔦
The HC-SR501 PIR Motion Sensor is a highly sensitive infrared sensor that detects human and other object movement based on body heat. It’s widely used in security systems, automatic lighting, smart home automation, and energy-saving applications. With an adjustable sensitivity range and delay time, this sensor ensures precise motion detection in various environments.
Combine this with a 5v Relay Module to control AC bulbs.
🔹 Technical Specifications & Performance ⚡
✔ Operating Voltage: 4.5V – 20V
✔ Detection Range: 3m – 7m (adjustable)
✔ Detection Angle: 120° wide-angle sensing
✔ Output Type: Digital (HIGH when motion is detected, LOW when idle)
✔ Trigger Modes: Single trigger & repeat trigger (configurable)
✔ Delay Time: Adjustable from 0.3s to 300s
✔ Power Consumption: Low energy usage for battery-operated projects
✔ Compatible with: Arduino, Raspberry Pi, ESP8266, ESP32, and other microcontrollers
🔹 Applications – Where to Use the PIR Motion Sensor 🚶♂️
✔ Security & Intruder Alarms – Detects human movement for anti-theft systems.
✔ Automatic Lighting Control – Activates lights when motion is detected.
✔ Smart Home & IoT Automation – Ideal for motion-activated devices.
✔ Energy-Saving Solutions – Turns off appliances when no motion is detected.
✔ Robotics & AI Projects – Adds motion-sensing capabilities to smart robots.
🔹 Easy to Integrate & Use 🔌
The HC-SR501 PIR Motion Sensor features a plug-and-play design, making it simple to connect to an Arduino, Raspberry Pi, ESP8266, or other microcontroller. Just adjust the delay time and sensitivity using the onboard potentiometers, and it’s ready to go.
🔹 Best Price & Availability in Ghana 🇬🇭
Are you looking for an HC-SR501 PIR Motion Sensor in Ghana? Whether you’re working on security systems, smart lighting, or home automation, this sensor is affordable, efficient, and easy to integrate. Order today for fast delivery across Ghana!
🔹 How to Use & External Resources 📚
Setting up the HC-SR501 PIR sensor is simple! Just connect the power (VCC), ground (GND), and signal output (OUT) to an Arduino, Raspberry Pi, ESP8266 or just a relay module. Adjust the sensitivity and delay time using the potentiometers on the board.
📖 Helpful Resources:
✔ Arduino HC-SR501 PIR Motion Sensor Guide
✔ Raspberry Pi Motion Sensor Setup
✔ Official HC-SR501 Datasheet
✔ YouTube Tutorials – How to Connect PIR Sensor
Related products
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
Teach your robot to see. This sensor emits infrared light and detects reflections to see if an object is in front of it. It is the essential component for building "Obstacle Avoiding Robots" and simple security alarms.
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
The easiest way to drive 12V/24V loads. This breakout board allows your Arduino to control high-voltage devices like LED strips, DC motors, and solenoid valves using the IRF520 MOSFET. It features screw terminals for easy wiring—no soldering required!
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
MQ-3 Alcohol Sensor Module | Breathalyzer & Ethanol Detector
Build your own Breathalyzer. The MQ-3 is specifically designed to detect alcohol (Ethanol) vapors. It has high sensitivity and fast response time, making it the perfect sensor for "Smart Car" safety systems that prevent drunk driving.
-
Detects: Alcohol, Ethanol, Benzine.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Warm-up: Heater requires ~20 seconds.
-
Best For: Breathalyzers, Drunk Driving Alarms, and Industrial Monitoring.
NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
Add Satellite Navigation to your project. This high-precision GPS module allows your Arduino, ESP32, or Drone to know its exact location, speed, and time. It comes with a detachable ceramic antenna and a built-in backup battery for fast "Hot Starts."
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
Detect motion, impacts, and theft. The SW-420 is a "Normally Closed" vibration sensor that triggers whenever it feels a shake. It features an onboard potentiometer to adjust sensitivity, making it perfect for sensitive projects like door alarms or earthquake detectors.
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.