HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Original price was: ₵22.00.₵20.00Current price is: ₵20.00.
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
9 in stock
Reliable Motion Detection with Infrared Technology 🔦
The HC-SR501 PIR Motion Sensor is a highly sensitive infrared sensor that detects human and other object movement based on body heat. It’s widely used in security systems, automatic lighting, smart home automation, and energy-saving applications. With an adjustable sensitivity range and delay time, this sensor ensures precise motion detection in various environments.
Combine this with a 5v Relay Module to control AC bulbs.
🔹 Technical Specifications & Performance ⚡
✔ Operating Voltage: 4.5V – 20V
✔ Detection Range: 3m – 7m (adjustable)
✔ Detection Angle: 120° wide-angle sensing
✔ Output Type: Digital (HIGH when motion is detected, LOW when idle)
✔ Trigger Modes: Single trigger & repeat trigger (configurable)
✔ Delay Time: Adjustable from 0.3s to 300s
✔ Power Consumption: Low energy usage for battery-operated projects
✔ Compatible with: Arduino, Raspberry Pi, ESP8266, ESP32, and other microcontrollers
🔹 Applications – Where to Use the PIR Motion Sensor 🚶♂️
✔ Security & Intruder Alarms – Detects human movement for anti-theft systems.
✔ Automatic Lighting Control – Activates lights when motion is detected.
✔ Smart Home & IoT Automation – Ideal for motion-activated devices.
✔ Energy-Saving Solutions – Turns off appliances when no motion is detected.
✔ Robotics & AI Projects – Adds motion-sensing capabilities to smart robots.
🔹 Easy to Integrate & Use 🔌
The HC-SR501 PIR Motion Sensor features a plug-and-play design, making it simple to connect to an Arduino, Raspberry Pi, ESP8266, or other microcontroller. Just adjust the delay time and sensitivity using the onboard potentiometers, and it’s ready to go.
🔹 Best Price & Availability in Ghana 🇬🇭
Are you looking for an HC-SR501 PIR Motion Sensor in Ghana? Whether you’re working on security systems, smart lighting, or home automation, this sensor is affordable, efficient, and easy to integrate. Order today for fast delivery across Ghana!
🔹 How to Use & External Resources 📚
Setting up the HC-SR501 PIR sensor is simple! Just connect the power (VCC), ground (GND), and signal output (OUT) to an Arduino, Raspberry Pi, ESP8266 or just a relay module. Adjust the sensitivity and delay time using the potentiometers on the board.
📖 Helpful Resources:
✔ Arduino HC-SR501 PIR Motion Sensor Guide
✔ Raspberry Pi Motion Sensor Setup
✔ Official HC-SR501 Datasheet
✔ YouTube Tutorials – How to Connect PIR Sensor
Related products
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
Give your robot the ability to see fire. This sensor detects the specific infrared light wavelengths (760nm - 1100nm) emitted by flames. It is the essential "eye" for Fire Fighting Robots and home fire alarm projects.
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm - 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
The easiest way to drive 12V/24V loads. This breakout board allows your Arduino to control high-voltage devices like LED strips, DC motors, and solenoid valves using the IRF520 MOSFET. It features screw terminals for easy wiring—no soldering required!
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
Build your own Fire & Gas Leak Alarm. The MQ-2 is a dual-purpose safety sensor. It detects Smoke (from fires) and Combustible Gases (like LPG, Propane, and Butane). It is the standard module for building "Smart Kitchen" safety monitors.
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
Add Satellite Navigation to your project. This high-precision GPS module allows your Arduino, ESP32, or Drone to know its exact location, speed, and time. It comes with a detachable ceramic antenna and a built-in backup battery for fast "Hot Starts."
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
Reviews
There are no reviews yet.