HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Original price was: ₵22.00.₵20.00Current price is: ₵20.00.
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
11 in stock
Reliable Motion Detection with Infrared Technology 🔦
The HC-SR501 PIR Motion Sensor is a highly sensitive infrared sensor that detects human and other object movement based on body heat. It’s widely used in security systems, automatic lighting, smart home automation, and energy-saving applications. With an adjustable sensitivity range and delay time, this sensor ensures precise motion detection in various environments.
Combine this with a 5v Relay Module to control AC bulbs.
🔹 Technical Specifications & Performance ⚡
✔ Operating Voltage: 4.5V – 20V
✔ Detection Range: 3m – 7m (adjustable)
✔ Detection Angle: 120° wide-angle sensing
✔ Output Type: Digital (HIGH when motion is detected, LOW when idle)
✔ Trigger Modes: Single trigger & repeat trigger (configurable)
✔ Delay Time: Adjustable from 0.3s to 300s
✔ Power Consumption: Low energy usage for battery-operated projects
✔ Compatible with: Arduino, Raspberry Pi, ESP8266, ESP32, and other microcontrollers
🔹 Applications – Where to Use the PIR Motion Sensor 🚶♂️
✔ Security & Intruder Alarms – Detects human movement for anti-theft systems.
✔ Automatic Lighting Control – Activates lights when motion is detected.
✔ Smart Home & IoT Automation – Ideal for motion-activated devices.
✔ Energy-Saving Solutions – Turns off appliances when no motion is detected.
✔ Robotics & AI Projects – Adds motion-sensing capabilities to smart robots.
🔹 Easy to Integrate & Use 🔌
The HC-SR501 PIR Motion Sensor features a plug-and-play design, making it simple to connect to an Arduino, Raspberry Pi, ESP8266, or other microcontroller. Just adjust the delay time and sensitivity using the onboard potentiometers, and it’s ready to go.
🔹 Best Price & Availability in Ghana 🇬🇭
Are you looking for an HC-SR501 PIR Motion Sensor in Ghana? Whether you’re working on security systems, smart lighting, or home automation, this sensor is affordable, efficient, and easy to integrate. Order today for fast delivery across Ghana!
🔹 How to Use & External Resources 📚
Setting up the HC-SR501 PIR sensor is simple! Just connect the power (VCC), ground (GND), and signal output (OUT) to an Arduino, Raspberry Pi, ESP8266 or just a relay module. Adjust the sensitivity and delay time using the potentiometers on the board.
📖 Helpful Resources:
✔ Arduino HC-SR501 PIR Motion Sensor Guide
✔ Raspberry Pi Motion Sensor Setup
✔ Official HC-SR501 Datasheet
✔ YouTube Tutorials – How to Connect PIR Sensor
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your microcontroller from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your "Dry" trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.