5V Single Channel Relay Module 10A (KY-019)
₵15.00
The 5V Single Channel Relay Module 10A (KY-019) allows Arduino and other microcontrollers to switch external electrical loads using a HIGH-level control signal. It features a 5V relay, NO/NC contacts, screw terminals and an onboard status LED for automation, robotics and electronics projects.
50 in stock
The 5V Single Channel Relay Module 10A (KY-019) is a compact electronic switching board designed to let microcontrollers control external electrical circuits using a low-power digital signal.
Featuring a 5V electromagnetic relay, HIGH-level trigger input, indicator LED and three screw terminals, the KY-019 is suitable for Arduino projects, automatic switching, robotics, lighting control and electronic automation.
Unlike low-level-trigger relay boards, the KY-019 activates when its signal input is driven HIGH, making it convenient for projects that require active-HIGH switching logic.
Key Features
- Single Channel Switching: Controls one independent electrical circuit.
- 5V DC Operation: Powered by a regulated 5V supply.
- HIGH-Level Trigger: Activates the relay when the control signal is HIGH.
- 10A Relay Contacts: Relay marked with 10A switching ratings for specified AC loads.
- NO and NC Contacts: Supports normally open and normally closed switching arrangements.
- SPDT Relay: Provides Common, Normally Open and Normally Closed contact connections.
- Onboard Indicator LED: Displays the relay’s activation state.
- Transistor Driver Circuit: Allows a microcontroller signal to operate the relay coil.
- Screw Terminal Connections: Convenient wiring of the external circuit.
- PCB Mounting Holes: Allows secure installation in project enclosures.
Technical Specifications
| Specification | Details |
|---|---|
| Module Model | KY-019 |
| Product Type | Single Channel Relay Module |
| Operating Voltage | 5V DC |
| Relay Coil Voltage | 5V DC |
| Trigger Type | HIGH-Level / Active HIGH |
| Number of Channels | 1 |
| Contact Configuration | SPDT |
| Relay Contact Rating | 10A at 250V AC |
| Additional AC Rating | 10A at 125V AC |
| Control Pins | S, +, – |
| Output Contacts | COM, NO, NC |
| Switching Indicator | Onboard LED |
| Driver Circuit | Transistor and Flyback Diode |
| Optocoupler Isolation | No |
| Relay Colour | Blue |
| PCB Colour | Black |
The ratings shown above are for the relay module. The safe switching capacity of a completed installation also depends on the wiring, load type and enclosure.
Applications
1. Arduino Automation Projects
Use the KY-019 relay module to switch external circuits based on programmed conditions.
Connect it to an Arduino Uno R3 Development Board to build automatic switching and control projects.
2. Automatic Lighting Control
Switch compatible lighting circuits using programmed schedules, sensors or manual control inputs.
3. Water Pump Control
Use the relay as part of a suitable control circuit for automatic water-level monitoring and pump operation, with a properly rated switching device where necessary.
4. Home Automation Projects
Create remote-controlled or sensor-activated switching systems using compatible microcontrollers.
5. Robotics and Electronic Systems
Control compatible external circuits, indicators and small electrical loads from a microcontroller.
6. STEM and Electronics Education
Demonstrate electromagnetic relays, digital switching, transistor drivers, NO/NC contacts and electrical control principles.
How the KY-019 Relay Module Works
The KY-019 uses an electromagnetic relay operated through an onboard transistor driver.
When the control signal becomes HIGH, the driver energizes the relay coil, causing the internal contacts to change state.
| Control Signal | Relay State | Contact Connection |
|---|---|---|
| LOW | Deactivated | COM connected to NC |
| HIGH | Activated | COM connected to NO |
This makes it possible for a microcontroller to control a separate electrical circuit using a digital output.
Control Pin Connections
| KY-019 Pin | Function |
|---|---|
| S | Digital control signal |
| + | 5V DC supply |
| – | Ground |
Connecting to Arduino Uno
For a basic test:
| KY-019 Module | Arduino Uno |
|---|---|
| S | Digital Pin D7 |
| + | 5V |
| – | GND |
In your Arduino program:
- Set D7 HIGH to activate the relay.
- Set D7 LOW to deactivate the relay.
Use a stable 5V supply capable of providing the relay coil’s required current.
For convenient wiring, DIYGH stocks Male-to-Female Jumper Wires.
Understanding NO, NC and COM
The relay has three switching terminals.
COM (Common): The moving contact shared by the two switching positions.
NO (Normally Open): Disconnected from COM when the relay is deactivated. Connects to COM when the relay activates.
NC (Normally Closed): Connected to COM when the relay is deactivated. Disconnects when the relay activates.
This allows the module to be used in either normally open or normally closed control arrangements.
HIGH-Level vs LOW-Level Trigger Relay Modules
The KY-019 is a HIGH-level-trigger module.
This means the relay activates when the control signal is HIGH.
For projects requiring activation when the signal becomes LOW, DIYGH also stocks the 1-Channel 5V Relay Module with Low-Level Trigger.
The two versions perform similar switching functions but use different control logic.
Important Usage Information
- Use a regulated 5V DC supply for the relay module.
- Check the polarity of the control connections before applying power.
- Do not power the relay coil directly from a microcontroller GPIO pin.
- This module does not include optocoupler isolation.
- Verify signal-level compatibility before connecting 3.3V microcontrollers such as ESP32.
- The printed relay contact ratings do not automatically establish the safe operating limits of the complete board.
- Use suitable protection for inductive loads such as motors and pumps.
- Disconnect power before changing wiring.
- Mains-voltage installations require a qualified electrician, suitable enclosure and verified insulation and protection.
Package Includes
- 1 x 5V Single Channel Relay Module 10A (KY-019)
Microcontroller, jumper wires and external power supply are not included.
Available from DIYGH Tech Hub, Apatrapa Junction, Kumasi, Ghana, for Arduino, robotics, automation and electronics projects.
Related products
16-in-1 Sensor Module Kit for Arduino, ESP32 & Raspberry Pi
Expand your project possibilities instantly. This value-packed kit contains 16 of the most popular sensors for home automation and robotics. Instead of buying modules individually, get everything you need in one box.
-
Includes: DHT11 Temperature, Relay, Ultrasonic, Motion Sensor, and 12 more!
-
Compatibility: Works perfectly with Arduino Uno, Mega, Nano, and Raspberry Pi.
-
Perfect For: Learning how to read data and control devices.
16×2 LCD Display with I2C Interface – Yellow Backlight
A clear, beginner-friendly 16×2 character display with the I2C backpack already soldered. The yellow-green backlight provides excellent readability while the I2C interface reduces wiring to only four connections.
Display: 16 characters × 2 lines
Backlight: Yellow-Green
Interface: I2C (VCC, GND, SDA, SCL)
Voltage: 5V DC
Contrast: Adjustable
Installation: Ready to use – no backpack soldering required
Best For: Arduino, ESP32, Raspberry Pi, IoT and educational projects
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
Make your project react to light. This sensor detects the brightness of the environment. Unlike the 3-pin version, this 4-Pin Module gives you both a Digital Output (to trigger a switch) and an Analog Output (to measure exact brightness). Perfect for automatic streetlights and solar trackers.
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
NTC Thermistor Sensor Module
Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your "Dry" trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.

Reviews
There are no reviews yet.