5V Single Channel Relay Module 10A (KY-019)

₵15.00

The 5V Single Channel Relay Module 10A (KY-019) allows Arduino and other microcontrollers to switch external electrical loads using a HIGH-level control signal. It features a 5V relay, NO/NC contacts, screw terminals and an onboard status LED for automation, robotics and electronics projects.

50 in stock

Description

The 5V Single Channel Relay Module 10A (KY-019) is a compact electronic switching board designed to let microcontrollers control external electrical circuits using a low-power digital signal.

Featuring a 5V electromagnetic relay, HIGH-level trigger input, indicator LED and three screw terminals, the KY-019 is suitable for Arduino projects, automatic switching, robotics, lighting control and electronic automation.

Unlike low-level-trigger relay boards, the KY-019 activates when its signal input is driven HIGH, making it convenient for projects that require active-HIGH switching logic.

Key Features

  • Single Channel Switching: Controls one independent electrical circuit.
  • 5V DC Operation: Powered by a regulated 5V supply.
  • HIGH-Level Trigger: Activates the relay when the control signal is HIGH.
  • 10A Relay Contacts: Relay marked with 10A switching ratings for specified AC loads.
  • NO and NC Contacts: Supports normally open and normally closed switching arrangements.
  • SPDT Relay: Provides Common, Normally Open and Normally Closed contact connections.
  • Onboard Indicator LED: Displays the relay’s activation state.
  • Transistor Driver Circuit: Allows a microcontroller signal to operate the relay coil.
  • Screw Terminal Connections: Convenient wiring of the external circuit.
  • PCB Mounting Holes: Allows secure installation in project enclosures.

Technical Specifications

Specification Details
Module Model KY-019
Product Type Single Channel Relay Module
Operating Voltage 5V DC
Relay Coil Voltage 5V DC
Trigger Type HIGH-Level / Active HIGH
Number of Channels 1
Contact Configuration SPDT
Relay Contact Rating 10A at 250V AC
Additional AC Rating 10A at 125V AC
Control Pins S, +, –
Output Contacts COM, NO, NC
Switching Indicator Onboard LED
Driver Circuit Transistor and Flyback Diode
Optocoupler Isolation No
Relay Colour Blue
PCB Colour Black

The ratings shown above are for the relay module. The safe switching capacity of a completed installation also depends on the wiring, load type and enclosure.

Applications

1. Arduino Automation Projects

Use the KY-019 relay module to switch external circuits based on programmed conditions.

Connect it to an Arduino Uno R3 Development Board to build automatic switching and control projects.

2. Automatic Lighting Control

Switch compatible lighting circuits using programmed schedules, sensors or manual control inputs.

3. Water Pump Control

Use the relay as part of a suitable control circuit for automatic water-level monitoring and pump operation, with a properly rated switching device where necessary.

4. Home Automation Projects

Create remote-controlled or sensor-activated switching systems using compatible microcontrollers.

5. Robotics and Electronic Systems

Control compatible external circuits, indicators and small electrical loads from a microcontroller.

6. STEM and Electronics Education

Demonstrate electromagnetic relays, digital switching, transistor drivers, NO/NC contacts and electrical control principles.

How the KY-019 Relay Module Works

The KY-019 uses an electromagnetic relay operated through an onboard transistor driver.

When the control signal becomes HIGH, the driver energizes the relay coil, causing the internal contacts to change state.

Control Signal Relay State Contact Connection
LOW Deactivated COM connected to NC
HIGH Activated COM connected to NO

This makes it possible for a microcontroller to control a separate electrical circuit using a digital output.

Control Pin Connections

KY-019 Pin Function
S Digital control signal
+ 5V DC supply
– Ground

Connecting to Arduino Uno

For a basic test:

KY-019 Module Arduino Uno
S Digital Pin D7
+ 5V
– GND

In your Arduino program:

  • Set D7 HIGH to activate the relay.
  • Set D7 LOW to deactivate the relay.

Use a stable 5V supply capable of providing the relay coil’s required current.

For convenient wiring, DIYGH stocks Male-to-Female Jumper Wires.

Understanding NO, NC and COM

The relay has three switching terminals.

COM (Common): The moving contact shared by the two switching positions.

NO (Normally Open): Disconnected from COM when the relay is deactivated. Connects to COM when the relay activates.

NC (Normally Closed): Connected to COM when the relay is deactivated. Disconnects when the relay activates.

This allows the module to be used in either normally open or normally closed control arrangements.

HIGH-Level vs LOW-Level Trigger Relay Modules

The KY-019 is a HIGH-level-trigger module.

This means the relay activates when the control signal is HIGH.

For projects requiring activation when the signal becomes LOW, DIYGH also stocks the 1-Channel 5V Relay Module with Low-Level Trigger.

The two versions perform similar switching functions but use different control logic.

Important Usage Information

  • Use a regulated 5V DC supply for the relay module.
  • Check the polarity of the control connections before applying power.
  • Do not power the relay coil directly from a microcontroller GPIO pin.
  • This module does not include optocoupler isolation.
  • Verify signal-level compatibility before connecting 3.3V microcontrollers such as ESP32.
  • The printed relay contact ratings do not automatically establish the safe operating limits of the complete board.
  • Use suitable protection for inductive loads such as motors and pumps.
  • Disconnect power before changing wiring.
  • Mains-voltage installations require a qualified electrician, suitable enclosure and verified insulation and protection.

Package Includes

  • 1 x 5V Single Channel Relay Module 10A (KY-019)

Microcontroller, jumper wires and external power supply are not included.

Available from DIYGH Tech Hub, Apatrapa Junction, Kumasi, Ghana, for Arduino, robotics, automation and electronics projects.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “5V Single Channel Relay Module 10A (KY-019)”

Your email address will not be published. Required fields are marked *