Electronics Components
The building blocks of every great project. Whether you are repairing a board or building a circuit from scratch, you need reliable components. We stock a huge inventory of active and passive components, including resistors, capacitors, transistors, diodes, and LEDs. High-quality parts for students, repair technicians, and hobbyists.
Showing 1–15 of 18 results
1/4W Carbon Film Resistor – Select Value by Request
2S 13A 18650 Lithium Battery BMS
3S 40A 18650 Lithium Battery BMS Protection Board
5V Active Buzzer Module for Arduino (Alarm/Beep) | KY-012
The loudest and easiest way to add sound to your project. This Active Buzzer module creates a loud beep as soon as you give it power. Unlike "Passive" buzzers that need complex code to make sound, this one is simple: High = Beep, Low = Silent.
-
Type: Active (Internal Oscillator).
-
Voltage: 3.3V - 5V DC.
-
Sound: Loud continuous tone (approx 2.5kHz).
-
Best For: Alarms, Timers, and Button Feedback.
BC547 NPN Transistor
BC557 PNP Transistor
INMP441 I2S MEMS Microphone Module
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
IRLZ44N Logic Level MOSFET (N-Channel) | Arduino Compatible Transistor
Control high-power loads directly from your Arduino or ESP32. The IRLZ44N is a true logic-level MOSFET, meaning it fully turns on with 3.3 V or 5 V gate signals. Unlike the common IRFZ44N, it does not require a gate driver, making it ideal for simple and efficient microcontroller projects.
-
Type: Logic-Level N-Channel MOSFET
-
Maximum Voltage / Current: 55 V / 47 A
-
Gate (Control) Voltage: 5 V (fully compatible with Arduino and ESP32)
- Best for: PWM LED dimming, DC motor speed control, solenoids, relays, and other high-current loads.
LM358 Dual Op-Amp IC | Low Power Operational Amplifier (DIP-8)
The industry-standard chip for audio and signals. The LM358 contains two independent, high-gain operational amplifiers in a single 8-pin package. Unlike the older 741 Op-Amp, the LM358 is designed to work perfectly with a single power supply (like a battery).
-
Package: DIP-8 (Breadboard Friendly)
-
Supply Voltage: 3V to 32V
-
Best For: Pre-amplifiers, Active Filters, and Line Following Robots (Comparator).
MAX98357A I2S 3W Class D Amplifier Module
NE555 Timer IC (NE555P, NE555N Precision Timer DIP-8)
-
Type: Precision Timer / Oscillator.
-
Package: DIP-8 (Fits standard breadboards).
-
Voltage: 4.5V - 16V DC.
-
Best For: LED Flashers, PWM Motor Control, and Tone Generation.
SN74HC595N 8-Bit Shift Register IC (DIP-16) | Pin Expander
Turn 3 pins into 8. Running out of pins on your Arduino? The SN74HC595 Shift Register allows you to control 8 separate outputs (like LEDs or LCDs) using only 3 digital pins on your microcontroller. You can even daisy-chain them to control hundreds of outputs!
-
Function: Serial-In, Parallel-Out (SIPO).
-
Channels: 8 Outputs per chip.
-
Voltage: 2V - 6V DC.
-
Best For: LED Chasers, 7-Segment Displays, and LED Cube Projects.
Solderable Prototype PCB Board 9x15cm
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Buy Resistors, Capacitors, Transistors & LEDs in Ghana
Every complex device starts with simple components. At DIYGH, we are the go-to source for the essential electronic parts that keep Ghana's tech running. From bulk packs for students to specific values for repair jobs, we have the inventory you can trust.
Essential Components Catalog
1. Passive Components (Resistors & Capacitors)
- Resistors: Available in 1/4W metal film for precision. We sell individual values and assorted kits—perfect for students who need a full range for their lab bench.
- Capacitors: From ceramic and polyester for filtering noise to large electrolytic capacitors for power supply smoothing.
- Potentiometers: Variable resistors for controlling volume, speed, or brightness.
2. Active Components (Transistors & Diodes)
- Transistors (BJT & MOSFET): The switches of the electronics world. We stock common types like BC547, 2N2222, and power MOSFETs (IRF series) for high-current switching.
- Diodes & Rectifiers: Essential for power protection. Stock up on standard 1N4007 rectifiers, Zener diodes for voltage regulation, and Schottky diodes for high-speed switching.
3. LEDs & Optoelectronics
- Standard LEDs (3mm & 5mm): Bright, colorful indicators for your projects. Available in Red, Green, Blue, Yellow, and White.
- RGB LEDs: create any color you want from a single bulb.
- Photocells (LDR): Light-dependent resistors for building automatic night-light circuits.
Why Buy Components from DIYGH?
Nothing is more frustrating than a fake transistor that burns out instantly. We source our components from reputable manufacturers to ensure they meet their datasheets specifications.