1.3 Inch OLED Display Module (Blue) | I2C SH1106 Screen 128×64
Original price was: ₵85.00.₵80.00Current price is: ₵80.00.
Bigger, clearer, and easier to read. The 1.3-inch OLED gives you 35% more screen area than the standard 0.96-inch version. It features the exact same 128×64 resolution but with larger pixels for better visibility from a distance.
-
Size: 1.3 Inch (Diagonal).
-
Controller: SH1106 (Requires specific library setting).
- Interface: I2C (4 Pins).
- Best For: Digital Dashboards, Smart Meters, and Menus.
1 in stock
The 1.3 inch OLED LCD Module (Blue) is a high-contrast, low-power display designed for Arduino, Raspberry Pi, ESP32, and other microcontrollers. With an I2C interface (4-pin) for easy connection, this OLED screen provides sharp, pixel-perfect graphics and text, making it perfect for IoT dashboards, sensor data visualization, and smart devices.
🔹 I2C Interface for Easy Wiring & Low Power Consumption ⚡
✔ Display Type: OLED, 1.3-inch, 128×64 resolution.
✔ Color: Blue pixels on black background for high contrast.
✔ Interface: I2C (IIC) – Uses only 4 pins (VCC, GND, SCL, SDA).
✔ Operating Voltage: 3.3V – 5V (compatible with Arduino & Raspberry Pi).
✔ Power Efficiency: Consumes less power than LCDs with backlights.
✔ Viewing Angle: Wide viewing range with crisp, high-contrast text & graphics.
✔ Driver Chip: SSD1306 (widely supported in Arduino libraries).
🔹 Applications – Where to Use the 1.3 inch OLED Display Module 🛠️
✔ Arduino & Raspberry Pi Projects – Show sensor data, system logs, and messages.
✔ IoT & Smart Devices – Display temperature, humidity, and other real-time readings.
✔ Wearable Tech & Compact Displays – Use in smartwatches, meters, and mini dashboards.
✔ Robotics & AI Systems – Monitor robotic movements, battery levels, and error logs.
✔ DIY Electronics & STEM Education – Perfect for learning programming and microcontroller interfacing.
🔹 How to Use & External Resources 📚
The 1.3 inch OLED LCD module connects via I2C (SDA, SCL) and is compatible with the Adafruit SSD1306 OLED library for quick setup. Simply connect VCC, GND, SCL, and SDA to your microcontroller and start displaying text, images, or animations.
📖 Helpful Resources for the 1.3 inch OLED LCD Module:
✔ SSD1306 OLED Arduino Setup Guide
✔ Raspberry Pi OLED Display Tutorial
✔ Adafruit SSD1306 Library & Code Examples
✔ YouTube Tutorials – OLED Display with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a 1.3 Inch OLED LCD Module (I2C, 4-Pin, Blue) in Ghana? Whether for IoT projects, robotics, or industrial monitoring, this high-contrast, power-efficient OLED screen is a must-have. Order today for fast delivery across Ghana!
Related products
Arduino Uno R3 Ultimate Starter Kit | RFID Learning Suite
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
MAX7219 4-in-1 Dot Matrix LED Display Module | Red Scrolling Text
Create your own digital sign board. This module combines four 8x8 LED matrices into a single display. It is pre-wired and ready to scroll text, numbers, and symbols using just 3 pins on your Arduino.
-
Resolution: 32 x 8 Pixels (Total 256 LEDs)
-
Color: Red
-
Interface: SPI (DIN, CS, CLK)
-
Best For: Digital clocks, scrolling message boards, and counters.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
Build your own Fire & Gas Leak Alarm. The MQ-2 is a dual-purpose safety sensor. It detects Smoke (from fires) and Combustible Gases (like LPG, Propane, and Butane). It is the standard module for building "Smart Kitchen" safety monitors.
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.