1.3 Inch OLED Display Module (Blue) | I2C SH1106 Screen 128×64
Original price was: ₵85.00.₵80.00Current price is: ₵80.00.
Bigger, clearer, and easier to read. The 1.3-inch OLED gives you 35% more screen area than the standard 0.96-inch version. It features the exact same 128×64 resolution but with larger pixels for better visibility from a distance.
-
Size: 1.3 Inch (Diagonal).
-
Controller: SH1106 (Requires specific library setting).
- Interface: I2C (4 Pins).
- Best For: Digital Dashboards, Smart Meters, and Menus.
1 in stock
The 1.3 inch OLED LCD Module (Blue) is a high-contrast, low-power display designed for Arduino, Raspberry Pi, ESP32, and other microcontrollers. With an I2C interface (4-pin) for easy connection, this OLED screen provides sharp, pixel-perfect graphics and text, making it perfect for IoT dashboards, sensor data visualization, and smart devices.
🔹 I2C Interface for Easy Wiring & Low Power Consumption ⚡
✔ Display Type: OLED, 1.3-inch, 128×64 resolution.
✔ Color: Blue pixels on black background for high contrast.
✔ Interface: I2C (IIC) – Uses only 4 pins (VCC, GND, SCL, SDA).
✔ Operating Voltage: 3.3V – 5V (compatible with Arduino & Raspberry Pi).
✔ Power Efficiency: Consumes less power than LCDs with backlights.
✔ Viewing Angle: Wide viewing range with crisp, high-contrast text & graphics.
✔ Driver Chip: SSD1306 (widely supported in Arduino libraries).
🔹 Applications – Where to Use the 1.3 inch OLED Display Module 🛠️
✔ Arduino & Raspberry Pi Projects – Show sensor data, system logs, and messages.
✔ IoT & Smart Devices – Display temperature, humidity, and other real-time readings.
✔ Wearable Tech & Compact Displays – Use in smartwatches, meters, and mini dashboards.
✔ Robotics & AI Systems – Monitor robotic movements, battery levels, and error logs.
✔ DIY Electronics & STEM Education – Perfect for learning programming and microcontroller interfacing.
🔹 How to Use & External Resources 📚
The 1.3 inch OLED LCD module connects via I2C (SDA, SCL) and is compatible with the Adafruit SSD1306 OLED library for quick setup. Simply connect VCC, GND, SCL, and SDA to your microcontroller and start displaying text, images, or animations.
📖 Helpful Resources for the 1.3 inch OLED LCD Module:
✔ SSD1306 OLED Arduino Setup Guide
✔ Raspberry Pi OLED Display Tutorial
✔ Adafruit SSD1306 Library & Code Examples
✔ YouTube Tutorials – OLED Display with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a 1.3 Inch OLED LCD Module (I2C, 4-Pin, Blue) in Ghana? Whether for IoT projects, robotics, or industrial monitoring, this high-contrast, power-efficient OLED screen is a must-have. Order today for fast delivery across Ghana!
Related products
0.96 Inch OLED Display Module (Blue) | I2C Interface 128×64 Pixel
Sharp, Bright, and Compact. This 0.96-inch OLED screen delivers incredibly crisp blue text on a black background. Unlike standard LCDs, it doesn't need a backlight, making it thinner and more energy-efficient. It uses the I2C interface, so you only need 2 wires to control it!
-
Resolution: 128 x 64 Pixels.
-
Color: Blue Text on Black Background.
-
Interface: I2C (Only 4 pins).
- Controller: SSD1306 (Standard Library).
- Best For: Smart Watches, Weather Stations, and Battery Monitors.
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.