AS608 Optical Fingerprint Sensor Module
₵260.00
AS608 optical fingerprint sensor module for biometric authentication, Arduino projects, ESP32 access control, smart locks, attendance systems and IoT security projects.
Out of stock
This product is currently sold out.
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
The AS608 Optical Fingerprint Sensor Module is a biometric fingerprint reader used for fingerprint enrollment, identification and authentication in electronics projects.
It uses optical fingerprint sensing technology to capture, process and compare fingerprint data. The module communicates through TTL serial/UART, making it suitable for use with Arduino, ESP32, Raspberry Pi, STM32 and other microcontroller-based systems.
This fingerprint module is useful for security projects, access control systems, smart locks, attendance systems, locker systems, safe box projects, IoT authentication and final-year electronics projects across Ghana. DIYGH supplies Arduino, IoT, sensor and security project modules from Kumasi to customers across Ghana.
Product Details:
Model: AS608
Sensor Type: Optical fingerprint sensor
Interface: TTL Serial / UART
Operating Voltage: 3.3V–5V DC
Baud Rate: 9600–57600, default 57600
Rated Current: About 120mA
Fingerprint Capacity: Up to 162 templates, depending on module version
Fingerprint Imaging Time: Less than 1 second
Template File Size: 512 bytes
Safety Level: 1–5
Sensing Window: About 16mm × 18mm
Connection: VCC, TXD, RXD, GND and NC
Package Includes: AS608 fingerprint sensor module with connection cable
Application:
Suitable for Arduino fingerprint projects, ESP32 access control systems, biometric attendance systems, smart door locks, electronic locker systems, safe box security, IoT authentication, security prototypes, STEM practicals and final-year electronics projects.
Customer Note:
This module uses TTL serial/UART communication. It is not a normal plug-and-play USB fingerprint scanner for logging into a computer. To use it with a computer, you need a USB-to-serial adapter or a microcontroller such as Arduino or ESP32.
Related products
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
4×4 Matrix Membrane Keypad | 16 Button Keypad Module
The standard keypad for security projects. This ultra-thin 16-button keypad allows users to enter passwords, navigate menus, or control robots. It features a peel-and-stick adhesive backing, making it easy to mount on any plastic project box or door.
-
Keys: 16 (0-9, A-D, *, #)
-
Mounting: Self-Adhesive Backing (Peel & Stick)
-
Interface: 8 Pins (Standard 2.54mm header)
-
Best For: Electronic Door Locks, Calculators, and Attendance Systems.
DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor. Encased in a stainless steel tube, it is perfect for measuring water, soil, or air temperature in harsh environments.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
Detect motion, impacts, and theft. The SW-420 is a "Normally Closed" vibration sensor that triggers whenever it feels a shake. It features an onboard potentiometer to adjust sensitivity, making it perfect for sensitive projects like door alarms or earthquake detectors.
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.