BMP180 Digital Barometric Pressure & Altitude Sensor Module
Original price was: ₵27.00.₵26.00Current price is: ₵26.00.
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
10 in stock
The BMP180 Digital Barometric Pressure Sensor Module is a high-precision sensor designed for altitude detection, weather monitoring, and environmental data logging. Featuring Bosch’s advanced MEMS technology, it provides precise atmospheric pressure readings, making it ideal for Arduino, Raspberry Pi, and IoT applications.
🔹 Ultra-Low Power & High Sensitivity for Portable Devices 🔄
With its low power consumption and small form factor, the BMP180 sensor is perfect for battery-operated projects, wearable devices, and mobile weather stations. It can measure absolute pressure from 300 hPa to 1100 hPa, allowing for altitude calculations up to 9,000 meters with an accuracy of ±1 meter.
🔹 Technical Specifications & Features ⚡
✔ Operating Voltage: 1.8V – 3.6V (compatible with 3.3V & 5V microcontrollers)
✔ Pressure Range: 300 hPa – 1100 hPa (equivalent to altitude 0 – 9,000m)
✔ Pressure Accuracy: ±1 hPa
✔ Altitude Accuracy: ±1 meter
✔ Communication Interface: I²C (Two-Wire) & SPI
✔ Low Power Consumption: 5µA in ultra-low power mode
✔ Temperature Compensation: Built-in sensor for accurate readings
✔ Dimensions: 11.5mm × 10mm × 3mm (compact & lightweight)
✔ Compatibility: Works with Arduino, Raspberry Pi, ESP8266, ESP32, STM32, and IoT platforms
🔹 Applications – Where to Use the BMP180 Sensor Module 🛠️
✔ Weather Stations & Climate Monitoring – Track barometric pressure changes.
✔ Altitude & GPS Systems – Measure elevation for drones & navigation projects.
✔ IoT & Smart Home Devices – Integrate with WiFi or Bluetooth for data logging.
✔ Wearable & Portable Devices – Monitor environmental conditions on the go.
✔ Drone & UAV Navigation – Essential for altitude-based flight stabilization.
🔹 How to Use & External Resources 📚
The BMP180 sensor module connects easily via I²C or SPI, requiring only two communication pins. Just wire it to your microcontroller, install the required library, and start logging real-time atmospheric data.
📖 Helpful Resources:
✔ Arduino Guide for BMP180 Sensor
✔ Raspberry Pi Pressure Sensor Setup
✔ BMP180 Datasheet & Pinout
✔ YouTube Tutorials – BMP180 with Arduino & Raspberry Pi
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a BMP180 Digital Barometric Pressure Sensor Module in Ghana? Whether for weather monitoring, altitude tracking, or IoT applications, this sensor is affordable, reliable, and easy to integrate. Order today for fast delivery across Ghana!
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your microcontroller from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
16-in-1 Sensor Module Kit for Arduino, ESP32 & Raspberry Pi
Expand your project possibilities instantly. This value-packed kit contains 16 of the most popular sensors for home automation and robotics. Instead of buying modules individually, get everything you need in one box.
-
Includes: DHT11 Temperature, Relay, Ultrasonic, Motion Sensor, and 12 more!
-
Compatibility: Works perfectly with Arduino Uno, Mega, Nano, and Raspberry Pi.
-
Perfect For: Learning how to read data and control devices.
16×2 LCD Display with I2C Interface – Blue Backlight
Display your project data with only four connections. This 16×2 LCD comes with the I2C backpack already soldered, making it ready to use without additional soldering.
Display: 16 characters × 2 lines
Backlight: Blue with white characters
Interface: I2C (VCC, GND, SDA, SCL)
Operating Voltage: 5V DC
Contrast: Adjustable onboard potentiometer
Beginner Friendly: I2C adapter already soldered
Best For: Arduino, ESP32, Raspberry Pi, IoT and STEM projects
A 16×2 character LCD provides two rows of 16 characters, while using an I2C interface greatly reduces the number of microcontroller connections required compared with the standard parallel interface.
16×2 LCD Display with I2C Interface – Yellow Backlight
A clear, beginner-friendly 16×2 character display with the I2C backpack already soldered. The yellow-green backlight provides excellent readability while the I2C interface reduces wiring to only four connections.
Display: 16 characters × 2 lines
Backlight: Yellow-Green
Interface: I2C (VCC, GND, SDA, SCL)
Voltage: 5V DC
Contrast: Adjustable
Installation: Ready to use – no backpack soldering required
Best For: Arduino, ESP32, Raspberry Pi, IoT and educational projects
3×4 Matrix Membrane Keypad Module | 12 Button Numeric Pad
A simple and reliable input device for Arduino and DIY electronics projects. This flexible 12-key keypad provides only the essential keys (0–9, *, #)—no letters—making it ideal for numeric-only applications. It comes with a peel-and-stick adhesive backing for quick mounting on enclosures, panels, or doors.
-
Keys: 12 (Telephone-style layout)
-
Interface: 7 pins (2.54 mm standard pitch)
-
Mounting: Self-adhesive sticker backing
- Best for: Electronic door locks, vending machines, access control systems, phone dialers, and keypad-based Arduino projects.
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
Reviews
There are no reviews yet.