DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Original price was: ₵40.00.₵38.00Current price is: ₵38.00.
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor. Encased in a stainless steel tube, it is perfect for measuring water, soil, or air temperature in harsh environments.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
2 in stock
The DS18B20 Waterproof Temperature Probe is a high-precision digital sensor designed for accurate temperature measurement in liquids, air, and harsh environments. Featuring a fully waterproof stainless steel casing, this probe is ideal for Arduino, Raspberry Pi, ESP8266, and industrial IoT applications.
🔹 One-Wire Communication for Easy Integration & Multiple Sensors ⚡
✔ Temperature Range: -55°C to +125°C (±0.5°C accuracy between -10°C and +85°C).
✔ Communication Protocol: One-Wire (Supports multiple sensors on a single data line).
✔ Waterproof Stainless Steel Probe: Ideal for wet & outdoor environments.
✔ Operating Voltage: 3.0V – 5.5V (Compatible with Arduino & Raspberry Pi).
✔ Cable Length: 1m, 2m, or more (varies by model).
✔ Durability: Resistant to rust, corrosion, and harsh environmental conditions.
🔹 Applications – Where to Use the DS18B20 Waterproof Sensor 🛠️
✔ Liquid Temperature Monitoring – Measure water, oil, and chemical temperatures.
✔ Aquarium & Hydroponics Systems – Monitor fish tanks, ponds, and plant systems.
✔ Smart Home & IoT Projects – Automate temperature control in smart environments.
✔ Weather Stations & Outdoor Monitoring – Use in environmental sensing applications.
✔ Industrial & Lab Equipment – Measure accurate temperatures in harsh conditions.
🔹 How to Use & External Resources 📚
The DS18B20 sensor communicates via One-Wire protocol, allowing multiple sensors to run on a single data pin. It works with Arduino, Raspberry Pi, ESP32, and STM32 and requires a 4.7kΩ pull-up resistor for stable operation.
📖 Helpful Resources for DS18B20 Waterproof Temperature Probe:
✔ DS18B20 Datasheet & Pinout
✔ Arduino Guide for DS18B20
✔ Raspberry Pi DS18B20 Temperature Sensor Setup
✔ YouTube Tutorials – DS18B20 Sensor with Arduino & Raspberry Pi
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a DS18B20 Waterproof Temperature Probe in Ghana? Whether for liquid temperature monitoring, IoT automation, or weather stations, this high-accuracy, stainless steel sensor is a must-have. Order today for fast delivery across Ghana!
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your microcontroller from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
20×4 LCD Display Module (Blue Backlight) | 2004A Character Screen
-
Size: 20 Characters x 4 Lines.
-
Display: White Text on Blue Background.
-
Controller: HD44780 (Standard Industry Chip).
- Best For: Weather Stations, 3D Printers, and Advanced Menus.
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.