Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
Original price was: ₵14.00.₵12.00Current price is: ₵12.00.
Give your robot the ability to see fire. This sensor detects the specific infrared light wavelengths (760nm – 1100nm) emitted by flames. It is the essential “eye” for Fire Fighting Robots and home fire alarm projects.
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm – 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
5 in stock
The YG1006 Flame Sensor Module detects infrared light from open flames, making it ideal for fire detection systems, safety alarms, and industrial monitoring. Its high-sensitivity phototransistor ensures quick and accurate flame detection.
🔹 Fast Response & Wide Detection Range 🌍
This flame sensor module operates with a wavelength range of 760nm – 1100nm, allowing it to detect flames from a distance. Whether used for fire alarms, gas leak detection, or smart home safety, it provides fast and reliable performance.
🔹 Technical Specifications & Performance ⚡
✔ Operating Voltage: 3.3V – 5V
✔ Wavelength Range: 760nm – 1100nm
✔ Detection Angle: 60°
✔ Output Type: Digital (DO) & Analog (AO)
✔ Response Time: High-speed detection in milliseconds
✔ Indicator LEDs: Power and signal status indicators
✔ Comparator: On-board LM393 chip
✔ Dimension: 3.2cm x 1.4cm
✔ Compatible with: Arduino, Raspberry Pi, ESP8266, and other microcontrollers
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a YG1006 Flame Sensor Module in Ghana? YG1006 Flame Sensor is affordable and highly effective for fire detection, safety automation, and industrial applications. Order today and get fast delivery across Ghana!
🔹 Easy to Use & Integrate 🔌
Connect the flame sensor module to your Arduino, Raspberry Pi, or other microcontroller, adjust sensitivity, and start monitoring flames instantly. The plug-and-play design makes it perfect for both beginners and professionals.
Flame Sensor Module Resources:
Watch and learn how to use the YG1006 Flame Sensor Module.
You can use the this sensor with the Arduino, Get started with the Arduino Project Book.
Also, check the official page of the Arduino Official Arduino Tutorial Page
You can also buy the Arduino Uno R3 DIP version or the SMD version for your projects.
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your microcontroller from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your "Dry" trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.