IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
Original price was: ₵18.00.₵16.00Current price is: ₵16.00.
The easiest way to drive 12V/24V loads. This breakout board allows your Arduino to control high-voltage devices like LED strips, DC motors, and solenoid valves using the IRF520 MOSFET. It features screw terminals for easy wiring—no soldering required!
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
10 in stock
The IRF520 MOSFET Driver Module is a compact and easy-to-use power switch for Arduino, Raspberry Pi, ESP8266, and microcontroller-based projects. Designed to control high-power DC devices, it’s perfect for LED strips, motors, pumps, and solenoids while offering low heat dissipation and high efficiency.
The IRF520 is a “Standard” MOSFET, not a “Logic Level” one. When driven by an Arduino (5V), it does not open fully.Result: It works perfectly for light loads (LEDs, small fans, Solenoids). However, if you try to drive a heavy motor (>1A), the module will get HOT. For heavy currents, please use our IRLZ44N Logic Level Transistor instead.
🔹 Simple Control with Microcontrollers & PWM Support 🔄
This module allows low-power microcontrollers (3.3V or 5V logic) to control high-power DC loads (up to 24V, 5A) using Pulse Width Modulation (PWM). Ideal for brightness control, motor speed adjustments, and heating elements, it ensures smooth and precise power management.
🔹 Technical Specifications & Features ⚙️
✔ MOSFET Type: IRF520 N-Channel
✔ Operating Voltage: 3.3V – 5V logic input (compatible with Arduino & Raspberry Pi)
✔ Load Voltage: Up to 24V DC
✔ Maximum Load Current: Up to 5A (with heat dissipation)
✔ PWM Control: Yes (for LED dimming & motor speed control)
✔ Gate Trigger Voltage: 5V logic compatible
✔ Output Type: Open Drain (switches DC loads)
✔ Module Size: 33mm × 24mm (compact & breadboard-friendly)
✔ Compatibility: Works with Arduino, Raspberry Pi, ESP8266, ESP32, STM32, and other microcontrollers
🔹 Applications – Where to Use the IRF520 MOSFET Module 🛠️
✔ LED & Light Strip Dimming – Control high-power LEDs and RGB strips.
✔ DC Motor & Fan Speed Control – Adjust speed using PWM signals.
✔ Heating Elements & Peltier Modules – Ideal for temperature regulation projects.
✔ Battery & Power Management – Efficient switching for solar panels & battery circuits.
✔ Solenoid & Relay Control – Power valves, electromagnets, and actuators.
🔹 How to Use & External Resources 📚
Using the IRF520 module is simple:
- Connect the VCC (5V) & GND to your microcontroller.
- Attach the logic input (SIG) to a PWM pin on Arduino, Raspberry Pi, or ESP8266.
- Connect your DC load (motor, LED, heater) to the output terminals.
📖 Helpful Resources for IRF520 MOSFET Driver Module:
✔ IRF520 MOSFET Datasheet
✔ Arduino MOSFET Switching Guide
✔ PWM Control with Raspberry Pi & MOSFETs
✔ YouTube Tutorials – IRF520 MOSFET Driver Module Projects
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for an IRF520 MOSFET Driver Module in Ghana? Whether for motor control, LED dimming, or power regulation, this module is affordable, efficient, and easy to integrate. Order today for fast delivery across Ghana!
Related products
3×4 Matrix Membrane Keypad Module | 12 Button Numeric Pad
A simple and reliable input device for Arduino and DIY electronics projects. This flexible 12-key keypad provides only the essential keys (0–9, *, #)—no letters—making it ideal for numeric-only applications. It comes with a peel-and-stick adhesive backing for quick mounting on enclosures, panels, or doors.
-
Keys: 12 (Telephone-style layout)
-
Interface: 7 pins (2.54 mm standard pitch)
-
Mounting: Self-adhesive sticker backing
- Best for: Electronic door locks, vending machines, access control systems, phone dialers, and keypad-based Arduino projects.
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
MQ-3 Alcohol Sensor Module | Breathalyzer & Ethanol Detector
-
Detects: Alcohol, Ethanol, Benzine.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Warm-up: Heater requires ~20 seconds.
-
Best For: Breathalyzers, Drunk Driving Alarms, and Industrial Monitoring.
NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
Reviews
There are no reviews yet.