Lithium Battery Level Indicator Module 1S-8S (Green Display)
₵20.00
The Lithium Battery Level Indicator Module 1S-8S provides an easy way to monitor battery charge using a bright four-bar green LED display. It supports 3.7V lithium-ion and LiPo battery packs from 1S to 8S, with selectable solder settings for DIY power banks, robotics and rechargeable electronics.
20 in stock
The Lithium Battery Level Indicator Module is a compact LED battery display designed to show the approximate remaining charge in lithium-ion and lithium-polymer battery packs.
Featuring four bright green LED bars within a red battery-shaped outline, the module allows users to check battery status without installing a separate digital voltmeter.
It supports 1S to 8S lithium battery configurations using selectable solder pads on the PCB, making it useful for DIY power banks, rechargeable electronics, robotics, portable speakers and battery-powered equipment.
Key Features
- 1S-8S Battery Compatibility: Configurable for lithium battery packs containing one to eight cells in series.
- Four-Bar LED Display: Shows the approximate battery charge level using green illuminated segments.
- Red Battery Outline: Provides a clear battery-shaped visual indicator.
- Selectable Battery Configuration: Solder pads labelled S1-S8 allow selection of the required battery arrangement.
- Wide Operating Voltage: Approximately 3V-34V DC.
- Low Power Consumption: Approximately 5mA during operation.
- Two-Wire Connection: Simple positive and negative battery connections.
- Compact PCB: Suitable for mounting in custom electronics enclosures.
- No External Controller Required: Operates directly from the connected battery pack.
Technical Specifications
| Specification | Details |
|---|---|
| Product Type | Lithium Battery Level Indicator Module |
| Supported Configuration | 1S-8S |
| Battery Chemistry | Li-ion / LiPo |
| Nominal Cell Voltage | 3.6V / 3.7V |
| Operating Voltage | 3V-34V DC |
| Typical Operating Current | Approximately 5mA |
| Display Type | Four-Segment LED Battery Indicator |
| Display Colour | Green Bars with Red Outline |
| Battery Selection | S1-S8 Solder Jumpers |
| Electrical Connections | Positive (+), Negative (-) |
| Battery Measurement | Pack Voltage-Based Level Indication |
| PCB Colour | Green |
| Protection Function | None |
| Charging Function | None |
Supported Lithium Battery Configurations
The module can be configured for the following standard 3.7V nominal lithium battery packs.
| Configuration | Nominal Voltage | Fully Charged Voltage |
|---|---|---|
| 1S | 3.7V | 4.2V |
| 2S | 7.4V | 8.4V |
| 3S | 11.1V | 12.6V |
| 4S | 14.8V | 16.8V |
| 5S | 18.5V | 21.0V |
| 6S | 22.2V | 25.2V |
| 7S | 25.9V | 29.4V |
| 8S | 29.6V | 33.6V |
The selected solder jumper must match the battery configuration.
Applications
1. DIY Lithium Battery Packs
Add a visible charge-level indicator to custom lithium battery packs using compatible 18650 cells.
DIYGH stocks 18650 Li-ion Rechargeable Batteries 3.7V 2500mAh for rechargeable electronics and battery-powered projects.
2. Portable Speakers and Audio Equipment
Integrate the indicator into compatible rechargeable speakers and portable audio devices to display the approximate remaining battery level.
3. Robotics Projects
Monitor battery status in battery-powered robots, mobile equipment and experimental automation systems.
4. DIY Power Banks
Provide a visual battery-level indicator on suitable lithium power bank projects.
5. Rechargeable Electronic Equipment
Install the display in portable electronic instruments, lighting systems and custom battery-powered devices.
6. Electronics Education
Demonstrate lithium battery voltage, series connections, voltage-based charge estimation and battery management principles.
How the Lithium Battery Level Indicator Module Works
The module monitors the total voltage of a connected lithium battery pack and uses predetermined voltage thresholds to illuminate the display segments.
The four green LED bars indicate the approximate battery level.
For a standard lithium-ion cell, the display follows these approximate voltage thresholds:
| Voltage Per Cell | Display |
|---|---|
| Below 3.3V | No green bars |
| Above 3.3V | 1 green bar |
| Above 3.5V | 2 green bars |
| Above 3.7V | 3 green bars |
| Above 3.9V | 4 green bars |
For multi-cell packs, the thresholds are multiplied by the number of series-connected cells.
The display is an approximate indication based on battery voltage, not a precision measurement of remaining energy or capacity. Battery load, temperature and battery condition can affect the displayed level.
How to Configure the Battery Indicator for 1S-8S
The rear of the PCB contains solder selection pads labelled S1 through S8.
Each selection corresponds to the number of lithium cells connected in series.
| Solder Jumper | Battery Configuration |
|---|---|
| S1 | 1S |
| S2 | 2S |
| S3 | 3S |
| S4 | 4S |
| S5 | 5S |
| S6 | 6S |
| S7 | 7S |
| S8 | 8S |
Configuration Procedure
- Disconnect the module from the battery.
- Identify the solder jumper corresponding to your battery pack.
- Check whether another configuration jumper is already bridged.
- Remove any existing configuration bridge that is not required.
- Bridge the required solder jumper.
- Check that only one configuration jumper is connected.
- Verify the battery voltage and polarity before connecting power.
For example, to monitor a 3S lithium battery pack, bridge the S3 selection pads.
Important: Only one S1-S8 configuration should be selected at a time.
Battery Wiring Connections
The module uses two connection pads.
| Terminal | Connection |
|---|---|
| + | Battery Pack Positive |
| – | Battery Pack Negative |
For a battery pack with a BMS, connect the display to the appropriate protected pack output terminals so it monitors the battery voltage.
The module measures the total battery-pack voltage. It does not require connections to the individual cells.
For battery protection, DIYGH stocks a 2S 13A Lithium Battery BMS and a 4S 40A Lithium Battery BMS for compatible projects.
Does This Module Charge the Battery?
No. The Lithium Battery Level Indicator Module only displays an approximate battery charge level.
It does not charge batteries, balance individual cells or provide overcharge and over-discharge protection.
A suitable charger and properly matched BMS are still required for safe rechargeable lithium battery operation.
For measuring and checking battery voltage, DIYGH also stocks the ANENG XL830L Digital Multimeter.
Important Usage Information
- Select the correct S1-S8 solder configuration before connecting the battery.
- Connect the positive and negative terminals with the correct polarity.
- Do not exceed the module’s operating voltage.
- Use with compatible 3.6V/3.7V nominal lithium-ion or LiPo battery packs.
- Do not use its voltage thresholds as a direct indication for LiFePO4 batteries.
- The module is not a battery protection system or charging controller.
- The displayed level is an approximation based on voltage, not a precise battery percentage.
- The module draws a small amount of current while powered. A switch may be used to disconnect it when continuous display is unnecessary.
- Protect the exposed PCB from moisture, dust and accidental short circuits.
- Disconnect battery power before changing the solder configuration.
Package Includes
- 1 x Lithium Battery Level Indicator Module 1S-8S (Green Display)
Battery cells, connection wires, BMS and enclosure are not included.
Available from DIYGH Tech Hub, Apatrapa Junction, Kumasi, Ghana, for lithium battery monitoring, robotics, rechargeable electronics and DIY power projects.
Related products
12V 2A AC to DC Power Adapter
2-Slot 18650 Battery Holder Case
20A Intelligent LCD Solar Charge Controller
2S/3S Type-C Lithium Battery Charger Module 8.4V/12.6V (IP2326)
The 2S/3S Type-C Lithium Battery Charger Module (IP2326) supports charging 7.4V and 11.1V lithium battery packs, with selectable 8.4V or 12.6V charging voltage through onboard solder configuration. It features USB-C input, up to 1.5A charging capability and CC/CV charging for rechargeable electronics and DIY battery projects.
3S 40A 18650 Lithium Battery BMS Protection Board
4S 40A 18650 Lithium Battery BMS
4S 4A Type-C Lithium Battery Boost Charger Module 16.8V
The 4S 4A Type-C Lithium Battery Boost Charger Module converts a 3-6V DC input into a regulated 16.8V charging supply for four-series lithium-ion and LiPo battery packs. It features USB-C input, approximately 1.12A charging current under suitable conditions, charging status indicators and a compact design for rechargeable battery projects.

Reviews
There are no reviews yet.