MQ-3 Alcohol Sensor Module | Breathalyzer & Ethanol Detector
Original price was: ₵32.00.₵28.00Current price is: ₵28.00.
Build your own Breathalyzer. The MQ-3 is specifically designed to detect alcohol (Ethanol) vapors. It has high sensitivity and fast response time, making it the perfect sensor for “Smart Car” safety systems that prevent drunk driving.
-
Detects: Alcohol, Ethanol, Benzine.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Warm-up: Heater requires ~20 seconds.
-
Best For: Breathalyzers, Drunk Driving Alarms, and Industrial Monitoring.
2 in stock
The MQ-3 Alcohol Ethanol Detection Sensor is a high-precision gas sensor designed to detect alcohol vapors, ethanol, and gasoline fumes. Ideal for breathalyzers, industrial monitoring, and smart IoT applications, this sensor helps measure alcohol concentration in the air and is widely used for vehicle safety, DUI prevention, and air quality control.
🔹 Dual Output & Adjustable Sensitivity for Easy Integration ⚡
✔ Gas Detection: Alcohol, ethanol, benzene, smoke, and gasoline vapors.
✔ Dual Output: Analog (exact concentration levels) & Digital (threshold-based alerts).
✔ Adjustable Sensitivity: Built-in potentiometer for threshold tuning.
✔ Operating Voltage: 5V DC (Compatible with Arduino & Raspberry Pi).
✔ Preheat Time: 20 seconds for stable and accurate readings.
✔ Durable & Compact Design: Long-lasting sensor with quick response time.
🔹 Applications – Where to Use the MQ-3 Sensor 🛠️
✔ Breath Alcohol Detection – Build your own DIY breathalyzer.
✔ Smart Vehicle Safety – Detect alcohol levels for DUI prevention.
✔ Workplace & Industrial Safety – Monitor alcohol exposure in factories.
✔ Air Quality Monitoring – Measure ethanol and gasoline vapors in enclosed spaces.
✔ Smart Home Automation – Integrate with IoT safety and security systems.
🔹 How to Use & External Resources 📚
The MQ-3 sensor is easy to connect with Arduino, Raspberry Pi, ESP8266, and other microcontrollers. Simply power it with 5V, connect the analog or digital output, and start measuring alcohol levels.
📖 Helpful Resources for MQ-3 Alcohol Ethanol Detection Sensor:
✔ MQ-3 Datasheet & Specifications
✔ How to Interface MQ-3 with Arduino
✔ Raspberry Pi Alcohol Sensor Guide
✔ YouTube Tutorials – MQ-3 Alcohol Sensor Projects
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for an MQ-3 Alcohol Ethanol Detection Sensor in Ghana? Whether for breathalyzers, industrial alcohol detection, or air quality monitoring, this sensor offers high accuracy and easy integration. Order today for fast delivery across Ghana!
Related products
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor. Encased in a stainless steel tube, it is perfect for measuring water, soil, or air temperature in harsh environments.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your "Dry" trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.