NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
₵85.00
Add Satellite Navigation to your project. This high-precision GPS module allows your Arduino, ESP32, or Drone to know its exact location, speed, and time. It comes with a detachable ceramic antenna and a built-in backup battery for fast “Hot Starts.”
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
2 in stock
The NEO-6M V2 GPS Module with EEPROM is a high-performance GPS receiver designed for precise location tracking, navigation, and real-time positioning. Equipped with an EEPROM for data retention, this module delivers fast satellite acquisition and stable performance, making it perfect for Arduino, Raspberry Pi, ESP32, drones, and IoT applications.
🔹 Built-in EEPROM & External Antenna for Reliable GPS Reception ⚡
✔ GPS Chipset: u-blox NEO-6M (High-sensitivity GNSS receiver).
✔ Operating Voltage: 3.3V – 5V (Compatible with Arduino & Raspberry Pi).
✔ Built-in EEPROM: Stores configuration data for quick boot-up.
✔ Baud Rate: Default 9600bps (adjustable).
✔ Antenna Type: External ceramic active antenna (for improved signal strength).
✔ Backup Battery (RTC): Keeps GPS settings for faster startup.
✔ Interface: UART (TX/RX, supports NMEA protocol output).
🔹 Applications – Where to Use the NEO-6M GPS Module 🛠️
✔ GPS Navigation & Tracking – Use in vehicles, boats, and drones for real-time location.
✔ IoT & Smart Devices – Integrate GPS with IoT projects for geofencing & asset tracking.
✔ Outdoor Robotics & Automation – Enable GPS-based autonomous navigation.
✔ Weather Stations & Environmental Monitoring – Collect geo-referenced data.
✔ Personal & Wildlife Tracking – Build GPS loggers for research & security.
🔹 How to Use & External Resources 📚
The NEO-6M V2 GPS Module connects easily via UART (TX/RX) to Arduino, Raspberry Pi, and ESP32. It outputs NMEA sentences containing latitude, longitude, altitude, speed, and time data.
📖 NEO-6M v2 GPS module with EEPROM Resources:
✔ Arduino GPS Integration With NEO-6M
✔ Raspberry Pi GPS Tracking with NEO-6M Setup
✔ YouTube Tutorials – NEO-6M GPS Module with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a NEO-6M V2 GPS Module with EEPROM in Ghana? Whether for navigation, asset tracking, or IoT geolocation, this high-precision GPS module is an essential tool. Order today for fast delivery across Ghana!
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your microcontroller from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor. Encased in a stainless steel tube, it is perfect for measuring water, soil, or air temperature in harsh environments.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.