NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
₵85.00
Add Satellite Navigation to your project. This high-precision GPS module allows your Arduino, ESP32, or Drone to know its exact location, speed, and time. It comes with a detachable ceramic antenna and a built-in backup battery for fast “Hot Starts.”
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
2 in stock
The NEO-6M V2 GPS Module with EEPROM is a high-performance GPS receiver designed for precise location tracking, navigation, and real-time positioning. Equipped with an EEPROM for data retention, this module delivers fast satellite acquisition and stable performance, making it perfect for Arduino, Raspberry Pi, ESP32, drones, and IoT applications.
🔹 Built-in EEPROM & External Antenna for Reliable GPS Reception ⚡
✔ GPS Chipset: u-blox NEO-6M (High-sensitivity GNSS receiver).
✔ Operating Voltage: 3.3V – 5V (Compatible with Arduino & Raspberry Pi).
✔ Built-in EEPROM: Stores configuration data for quick boot-up.
✔ Baud Rate: Default 9600bps (adjustable).
✔ Antenna Type: External ceramic active antenna (for improved signal strength).
✔ Backup Battery (RTC): Keeps GPS settings for faster startup.
✔ Interface: UART (TX/RX, supports NMEA protocol output).
🔹 Applications – Where to Use the NEO-6M GPS Module 🛠️
✔ GPS Navigation & Tracking – Use in vehicles, boats, and drones for real-time location.
✔ IoT & Smart Devices – Integrate GPS with IoT projects for geofencing & asset tracking.
✔ Outdoor Robotics & Automation – Enable GPS-based autonomous navigation.
✔ Weather Stations & Environmental Monitoring – Collect geo-referenced data.
✔ Personal & Wildlife Tracking – Build GPS loggers for research & security.
🔹 How to Use & External Resources 📚
The NEO-6M V2 GPS Module connects easily via UART (TX/RX) to Arduino, Raspberry Pi, and ESP32. It outputs NMEA sentences containing latitude, longitude, altitude, speed, and time data.
📖 NEO-6M v2 GPS module with EEPROM Resources:
✔ Arduino GPS Integration With NEO-6M
✔ Raspberry Pi GPS Tracking with NEO-6M Setup
✔ YouTube Tutorials – NEO-6M GPS Module with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a NEO-6M V2 GPS Module with EEPROM in Ghana? Whether for navigation, asset tracking, or IoT geolocation, this high-precision GPS module is an essential tool. Order today for fast delivery across Ghana!
Related products
3×4 Matrix Membrane Keypad Module | 12 Button Numeric Pad
A simple and reliable input device for Arduino and DIY electronics projects. This flexible 12-key keypad provides only the essential keys (0–9, *, #)—no letters—making it ideal for numeric-only applications. It comes with a peel-and-stick adhesive backing for quick mounting on enclosures, panels, or doors.
-
Keys: 12 (Telephone-style layout)
-
Interface: 7 pins (2.54 mm standard pitch)
-
Mounting: Self-adhesive sticker backing
- Best for: Electronic door locks, vending machines, access control systems, phone dialers, and keypad-based Arduino projects.
4×4 Matrix Membrane Keypad | 16 Button Keypad Module
-
Keys: 16 (0-9, A-D, *, #)
-
Mounting: Self-Adhesive Backing (Peel & Stick)
-
Interface: 8 Pins (Standard 2.54mm header)
-
Best For: Electronic Door Locks, Calculators, and Attendance Systems.
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
MQ-3 Alcohol Sensor Module | Breathalyzer & Ethanol Detector
-
Detects: Alcohol, Ethanol, Benzine.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Warm-up: Heater requires ~20 seconds.
-
Best For: Breathalyzers, Drunk Driving Alarms, and Industrial Monitoring.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.