NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
₵85.00
Add Satellite Navigation to your project. This high-precision GPS module allows your Arduino, ESP32, or Drone to know its exact location, speed, and time. It comes with a detachable ceramic antenna and a built-in backup battery for fast “Hot Starts.”
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
2 in stock
The NEO-6M V2 GPS Module with EEPROM is a high-performance GPS receiver designed for precise location tracking, navigation, and real-time positioning. Equipped with an EEPROM for data retention, this module delivers fast satellite acquisition and stable performance, making it perfect for Arduino, Raspberry Pi, ESP32, drones, and IoT applications.
🔹 Built-in EEPROM & External Antenna for Reliable GPS Reception ⚡
✔ GPS Chipset: u-blox NEO-6M (High-sensitivity GNSS receiver).
✔ Operating Voltage: 3.3V – 5V (Compatible with Arduino & Raspberry Pi).
✔ Built-in EEPROM: Stores configuration data for quick boot-up.
✔ Baud Rate: Default 9600bps (adjustable).
✔ Antenna Type: External ceramic active antenna (for improved signal strength).
✔ Backup Battery (RTC): Keeps GPS settings for faster startup.
✔ Interface: UART (TX/RX, supports NMEA protocol output).
🔹 Applications – Where to Use the NEO-6M GPS Module 🛠️
✔ GPS Navigation & Tracking – Use in vehicles, boats, and drones for real-time location.
✔ IoT & Smart Devices – Integrate GPS with IoT projects for geofencing & asset tracking.
✔ Outdoor Robotics & Automation – Enable GPS-based autonomous navigation.
✔ Weather Stations & Environmental Monitoring – Collect geo-referenced data.
✔ Personal & Wildlife Tracking – Build GPS loggers for research & security.
🔹 How to Use & External Resources 📚
The NEO-6M V2 GPS Module connects easily via UART (TX/RX) to Arduino, Raspberry Pi, and ESP32. It outputs NMEA sentences containing latitude, longitude, altitude, speed, and time data.
📖 NEO-6M v2 GPS module with EEPROM Resources:
✔ Arduino GPS Integration With NEO-6M
✔ Raspberry Pi GPS Tracking with NEO-6M Setup
✔ YouTube Tutorials – NEO-6M GPS Module with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a NEO-6M V2 GPS Module with EEPROM in Ghana? Whether for navigation, asset tracking, or IoT geolocation, this high-precision GPS module is an essential tool. Order today for fast delivery across Ghana!
Related products
16-in-1 Sensor Module Kit for Arduino, ESP32 & Raspberry Pi
Expand your project possibilities instantly. This value-packed kit contains 16 of the most popular sensors for home automation and robotics. Instead of buying modules individually, get everything you need in one box.
-
Includes: DHT11 Temperature, Relay, Ultrasonic, Motion Sensor, and 12 more!
-
Compatibility: Works perfectly with Arduino Uno, Mega, Nano, and Raspberry Pi.
-
Perfect For: Learning how to read data and control devices.
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.