SIM800L GSM GPRS Module
₵85.00
The SIM800L GSM GPRS Module enables SMS, voice calls, and mobile data communication for Arduino, Raspberry Pi, and IoT projects. Featuring quad-band GSM support, low power consumption, and UART communication, it’s perfect for remote monitoring, GPS tracking, and automation.
Out of stock
This product is currently sold out.
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
The SIM800L GSM GPRS Module is a compact, low-cost wireless module that enables voice calls, SMS messaging, and mobile internet connectivity in Arduino, Raspberry Pi, ESP32, and IoT projects. Supporting quad-band frequencies (850/900/1800/1900MHz), this module provides global network coverage, making it ideal for remote monitoring, GPS tracking, smart home automation, and security systems.
🔹 Compact, Low-Power GSM Module with Full Network Support ⚡
✔ Operating Voltage: 3.7V – 4.2V (Ideal for Li-ion batteries or voltage regulators).
✔ Network Support: GSM/GPRS (2G) – Supports 850/900/1800/1900MHz bands.
✔ Data Transmission: Supports TCP/IP, HTTP, and FTP protocols.
✔ SIM Card Compatibility: Micro SIM slot for mobile network access.
✔ Antenna Options: External PCB or spring antenna for better signal reception.
✔ Communication Interface: UART (TX/RX) – Works with Arduino, ESP8266, STM32, and Raspberry Pi.
✔ Low Power Consumption: Ideal for battery-powered IoT applications.
🔹 Applications – Where to Use the SIM800L Module 🛠️
✔ IoT & Smart Home Automation – Control devices remotely via SMS or mobile data.
✔ GPS Tracking & Asset Monitoring – Integrate with GPS modules for real-time location tracking.
✔ Security & Alarm Systems – Send alerts via SMS in case of intrusion or motion detection.
✔ Wireless Sensor Networks – Transmit sensor data over GPRS for remote monitoring.
✔ Remote Control & Telemetry – Control relays, smart devices, and industrial equipment wirelessly.
🔹 How to Use & External Resources 📚
The SIM800L GSM GPRS Module connects via UART (TX/RX) to Arduino, ESP32, STM32, and Raspberry Pi. Use AT commands to send SMS, make calls, or access mobile data. Ensure a regulated power supply (4.2V) for stable operation.
📖 Helpful Resources for SIM800L GSM Module:
✔ SIM800L Datasheet & Pinout
✔ Arduino SIM800L GSM Communication Guide
✔ Raspberry Pi SIM800L GSM Module Setup
✔ YouTube Tutorials – SIM800L with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Are you looking for a SIM800L GSM GPRS Module in Ghana? Whether for IoT projects, remote monitoring, or SMS-based automation, this compact and reliable GSM module is a must-have. Order today for fast delivery across Ghana!
Related products
16-in-1 Sensor Module Kit for Arduino, ESP32 & Raspberry Pi
Expand your project possibilities instantly. This value-packed kit contains 16 of the most popular sensors for home automation and robotics. Instead of buying modules individually, get everything you need in one box.
-
Includes: DHT11 Temperature, Relay, Ultrasonic, Motion Sensor, and 12 more!
-
Compatibility: Works perfectly with Arduino Uno, Mega, Nano, and Raspberry Pi.
-
Perfect For: Learning how to read data and control devices.
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.