Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Original price was: ₵15.00.₵14.00Current price is: ₵14.00.
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your “Dry” trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.
5 in stock
The Soil Moisture Sensor Module is designed to measure soil humidity levels in gardens, farms, and potted plants. With both analog and digital outputs, this module is ideal for automated irrigation systems, smart gardening, and environmental monitoring. Compatible with Arduino, Raspberry Pi, ESP8266, and IoT devices, it helps prevent overwatering or underwatering of plants.
🔹 Dual Output for Precise Moisture Level Monitoring ⚡
✔ Analog Output (AO): Provides real-time soil moisture percentage for detailed monitoring.
✔ Digital Output (DO): Pre-set threshold triggers HIGH/LOW signal for automation.
✔ Adjustable Sensitivity: Built-in potentiometer for fine-tuning moisture levels.
✔ Operating Voltage: 3.3V – 5V (Compatible with Arduino, ESP32, and Raspberry Pi).
✔ Power Efficiency: Low power consumption for battery-powered IoT applications.
✔ Corrosion-Resistant Probes: Ensures long-term durability in soil environments.
🔹 Applications – Where to Use the Soil Moisture Sensor 🛠️
✔ Automated Irrigation Systems – Trigger water pumps based on soil dryness.
✔ Smart Gardens & Greenhouses – Monitor soil health for optimal plant growth.
✔ IoT & Home Automation – Integrate with smart controllers for remote monitoring.
✔ Agriculture & Hydroponics – Enhance crop management with real-time data.
✔ STEM & DIY Electronics – Perfect for students and makers learning sensor technology.
🔹 How to Use & External Resources 📚
The Soil Moisture Sensor Module connects easily to Arduino, Raspberry Pi, and microcontrollers. Simply insert the probes into the soil, connect VCC, GND, AO, and DO, and start monitoring moisture levels using simple code and libraries.
📖 Helpful Resources for Soil Moisture Sensor Module:
✔ Arduino Soil Moisture Sensor Guide
✔ Raspberry Pi Smart Irrigation System
✔ YouTube Tutorials – Soil Moisture Sensor with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a Soil Moisture Sensor Module (Analog & Digital Outputs) in Ghana? Whether for home gardening, agricultural automation, or smart irrigation, this precise and reliable sensor is an essential tool for plant care. Order today for fast delivery across Ghana!
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your microcontroller from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.