Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Original price was: ₵15.00.₵14.00Current price is: ₵14.00.
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your “Dry” trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.
5 in stock
The Soil Moisture Sensor Module is designed to measure soil humidity levels in gardens, farms, and potted plants. With both analog and digital outputs, this module is ideal for automated irrigation systems, smart gardening, and environmental monitoring. Compatible with Arduino, Raspberry Pi, ESP8266, and IoT devices, it helps prevent overwatering or underwatering of plants.
🔹 Dual Output for Precise Moisture Level Monitoring ⚡
✔ Analog Output (AO): Provides real-time soil moisture percentage for detailed monitoring.
✔ Digital Output (DO): Pre-set threshold triggers HIGH/LOW signal for automation.
✔ Adjustable Sensitivity: Built-in potentiometer for fine-tuning moisture levels.
✔ Operating Voltage: 3.3V – 5V (Compatible with Arduino, ESP32, and Raspberry Pi).
✔ Power Efficiency: Low power consumption for battery-powered IoT applications.
✔ Corrosion-Resistant Probes: Ensures long-term durability in soil environments.
🔹 Applications – Where to Use the Soil Moisture Sensor 🛠️
✔ Automated Irrigation Systems – Trigger water pumps based on soil dryness.
✔ Smart Gardens & Greenhouses – Monitor soil health for optimal plant growth.
✔ IoT & Home Automation – Integrate with smart controllers for remote monitoring.
✔ Agriculture & Hydroponics – Enhance crop management with real-time data.
✔ STEM & DIY Electronics – Perfect for students and makers learning sensor technology.
🔹 How to Use & External Resources 📚
The Soil Moisture Sensor Module connects easily to Arduino, Raspberry Pi, and microcontrollers. Simply insert the probes into the soil, connect VCC, GND, AO, and DO, and start monitoring moisture levels using simple code and libraries.
📖 Helpful Resources for Soil Moisture Sensor Module:
✔ Arduino Soil Moisture Sensor Guide
✔ Raspberry Pi Smart Irrigation System
✔ YouTube Tutorials – Soil Moisture Sensor with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a Soil Moisture Sensor Module (Analog & Digital Outputs) in Ghana? Whether for home gardening, agricultural automation, or smart irrigation, this precise and reliable sensor is an essential tool for plant care. Order today for fast delivery across Ghana!
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your microcontroller from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
4×4 Matrix Membrane Keypad | 16 Button Keypad Module
-
Keys: 16 (0-9, A-D, *, #)
-
Mounting: Self-Adhesive Backing (Peel & Stick)
-
Interface: 8 Pins (Standard 2.54mm header)
-
Best For: Electronic Door Locks, Calculators, and Attendance Systems.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
Build your own Fire & Gas Leak Alarm. The MQ-2 is a dual-purpose safety sensor. It detects Smoke (from fires) and Combustible Gases (like LPG, Propane, and Butane). It is the standard module for building "Smart Kitchen" safety monitors.
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.