Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Original price was: ₵15.00.₵14.00Current price is: ₵14.00.
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your “Dry” trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.
6 in stock
The Soil Moisture Sensor Module is designed to measure soil humidity levels in gardens, farms, and potted plants. With both analog and digital outputs, this module is ideal for automated irrigation systems, smart gardening, and environmental monitoring. Compatible with Arduino, Raspberry Pi, ESP8266, and IoT devices, it helps prevent overwatering or underwatering of plants.
🔹 Dual Output for Precise Moisture Level Monitoring ⚡
✔ Analog Output (AO): Provides real-time soil moisture percentage for detailed monitoring.
✔ Digital Output (DO): Pre-set threshold triggers HIGH/LOW signal for automation.
✔ Adjustable Sensitivity: Built-in potentiometer for fine-tuning moisture levels.
✔ Operating Voltage: 3.3V – 5V (Compatible with Arduino, ESP32, and Raspberry Pi).
✔ Power Efficiency: Low power consumption for battery-powered IoT applications.
✔ Corrosion-Resistant Probes: Ensures long-term durability in soil environments.
🔹 Applications – Where to Use the Soil Moisture Sensor 🛠️
✔ Automated Irrigation Systems – Trigger water pumps based on soil dryness.
✔ Smart Gardens & Greenhouses – Monitor soil health for optimal plant growth.
✔ IoT & Home Automation – Integrate with smart controllers for remote monitoring.
✔ Agriculture & Hydroponics – Enhance crop management with real-time data.
✔ STEM & DIY Electronics – Perfect for students and makers learning sensor technology.
🔹 How to Use & External Resources 📚
The Soil Moisture Sensor Module connects easily to Arduino, Raspberry Pi, and microcontrollers. Simply insert the probes into the soil, connect VCC, GND, AO, and DO, and start monitoring moisture levels using simple code and libraries.
📖 Helpful Resources for Soil Moisture Sensor Module:
✔ Arduino Soil Moisture Sensor Guide
✔ Raspberry Pi Smart Irrigation System
✔ YouTube Tutorials – Soil Moisture Sensor with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a Soil Moisture Sensor Module (Analog & Digital Outputs) in Ghana? Whether for home gardening, agricultural automation, or smart irrigation, this precise and reliable sensor is an essential tool for plant care. Order today for fast delivery across Ghana!
Related products
16-in-1 Sensor Module Kit for Arduino, ESP32 & Raspberry Pi
Expand your project possibilities instantly. This value-packed kit contains 16 of the most popular sensors for home automation and robotics. Instead of buying modules individually, get everything you need in one box.
-
Includes: DHT11 Temperature, Relay, Ultrasonic, Motion Sensor, and 12 more!
-
Compatibility: Works perfectly with Arduino Uno, Mega, Nano, and Raspberry Pi.
-
Perfect For: Learning how to read data and control devices.
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
4×4 Matrix Membrane Keypad | 16 Button Keypad Module
-
Keys: 16 (0-9, A-D, *, #)
-
Mounting: Self-Adhesive Backing (Peel & Stick)
-
Interface: 8 Pins (Standard 2.54mm header)
-
Best For: Electronic Door Locks, Calculators, and Attendance Systems.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm - 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
MQ-3 Alcohol Sensor Module | Breathalyzer & Ethanol Detector
-
Detects: Alcohol, Ethanol, Benzine.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Warm-up: Heater requires ~20 seconds.
-
Best For: Breathalyzers, Drunk Driving Alarms, and Industrial Monitoring.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.