Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
₵15.00
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for “Clap Switch” projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
6 in stock
The Sound Sensor Module with Digital Output is a microphone-based sound detector designed to sense loud noises, claps, voice commands, and environmental sounds. Perfect for Arduino, Raspberry Pi, ESP8266, and automation projects, this module enables sound-triggered control for security systems, home automation, and interactive robotics.
🔹 Digital Output for Easy Microcontroller Integration 🔄
✔ Digital Output (DO): High or Low signal based on sound intensity.
✔ Adjustable Sensitivity: Built-in potentiometer for noise level tuning.
✔ Microphone Type: Electret Condenser Mic (high sensitivity).
✔ Power Supply: 3.3V – 5V (compatible with Arduino & microcontrollers).
✔ Output Indicator LED: Lights up when sound is detected.
✔ Plug & Play Design: Works with Arduino, Raspberry Pi, and IoT platforms.
🔹 Applications – Where to Use the Sound Sensor Module 🛠️
✔ Clap-Controlled Devices – Activate lights, fans, or relays with a clap.
✔ Noise-Activated Alarms – Trigger security systems on loud noises.
✔ Smart Home Automation – Control appliances based on sound.
✔ Interactive Robotics – Enable sound-triggered movements.
✔ Sound Level Monitoring – Detect loud noises in industrial or public areas.
🔹 How to Use & External Resources 📚
The Sound Sensor Module connects easily to Arduino, ESP8266, ESP32, or Raspberry Pi using three pins (VCC, GND, DO). The digital output switches HIGH when a sound is detected, allowing you to trigger external actions.
📖 Helpful Resources for the Sound Sensor Module:
✔ Arduino Sound Sensor Guide
✔ Raspberry Pi Sound Detection Projects
✔ YouTube Tutorials – Sound Sensor with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a Sound Sensor Module (Digital Output) in Ghana? Whether you’re developing clap-controlled devices, smart automation, or security systems, this sensor is affordable, efficient, and easy to use. Order today for fast delivery across Ghana!
Related products
3×4 Matrix Membrane Keypad Module | 12 Button Numeric Pad
A simple and reliable input device for Arduino and DIY electronics projects. This flexible 12-key keypad provides only the essential keys (0–9, *, #)—no letters—making it ideal for numeric-only applications. It comes with a peel-and-stick adhesive backing for quick mounting on enclosures, panels, or doors.
-
Keys: 12 (Telephone-style layout)
-
Interface: 7 pins (2.54 mm standard pitch)
-
Mounting: Self-adhesive sticker backing
- Best for: Electronic door locks, vending machines, access control systems, phone dialers, and keypad-based Arduino projects.
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm - 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
Reviews
There are no reviews yet.