AS608 Optical Fingerprint Sensor Module
₵260.00
AS608 optical fingerprint sensor module for biometric authentication, Arduino projects, ESP32 access control, smart locks, attendance systems and IoT security projects.
Out of stock
This product is currently sold out.
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
The AS608 Optical Fingerprint Sensor Module is a biometric fingerprint reader used for fingerprint enrollment, identification and authentication in electronics projects.
It uses optical fingerprint sensing technology to capture, process and compare fingerprint data. The module communicates through TTL serial/UART, making it suitable for use with Arduino, ESP32, Raspberry Pi, STM32 and other microcontroller-based systems.
This fingerprint module is useful for security projects, access control systems, smart locks, attendance systems, locker systems, safe box projects, IoT authentication and final-year electronics projects across Ghana. DIYGH supplies Arduino, IoT, sensor and security project modules from Kumasi to customers across Ghana.
Product Details:
Model: AS608
Sensor Type: Optical fingerprint sensor
Interface: TTL Serial / UART
Operating Voltage: 3.3V–5V DC
Baud Rate: 9600–57600, default 57600
Rated Current: About 120mA
Fingerprint Capacity: Up to 162 templates, depending on module version
Fingerprint Imaging Time: Less than 1 second
Template File Size: 512 bytes
Safety Level: 1–5
Sensing Window: About 16mm × 18mm
Connection: VCC, TXD, RXD, GND and NC
Package Includes: AS608 fingerprint sensor module with connection cable
Application:
Suitable for Arduino fingerprint projects, ESP32 access control systems, biometric attendance systems, smart door locks, electronic locker systems, safe box security, IoT authentication, security prototypes, STEM practicals and final-year electronics projects.
Customer Note:
This module uses TTL serial/UART communication. It is not a normal plug-and-play USB fingerprint scanner for logging into a computer. To use it with a computer, you need a USB-to-serial adapter or a microcontroller such as Arduino or ESP32.
Related products
16×2 LCD Display with I2C Interface – Blue Backlight
Display your project data with only four connections. This 16×2 LCD comes with the I2C backpack already soldered, making it ready to use without additional soldering.
Display: 16 characters × 2 lines
Backlight: Blue with white characters
Interface: I2C (VCC, GND, SDA, SCL)
Operating Voltage: 5V DC
Contrast: Adjustable onboard potentiometer
Beginner Friendly: I2C adapter already soldered
Best For: Arduino, ESP32, Raspberry Pi, IoT and STEM projects
A 16×2 character LCD provides two rows of 16 characters, while using an I2C interface greatly reduces the number of microcontroller connections required compared with the standard parallel interface.
16×2 LCD Display with I2C Interface – Yellow Backlight
A clear, beginner-friendly 16×2 character display with the I2C backpack already soldered. The yellow-green backlight provides excellent readability while the I2C interface reduces wiring to only four connections.
Display: 16 characters × 2 lines
Backlight: Yellow-Green
Interface: I2C (VCC, GND, SDA, SCL)
Voltage: 5V DC
Contrast: Adjustable
Installation: Ready to use – no backpack soldering required
Best For: Arduino, ESP32, Raspberry Pi, IoT and educational projects
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
Make your project react to light. This sensor detects the brightness of the environment. Unlike the 3-pin version, this 4-Pin Module gives you both a Digital Output (to trigger a switch) and an Analog Output (to measure exact brightness). Perfect for automatic streetlights and solar trackers.
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
Reviews
There are no reviews yet.