BMP180 Digital Barometric Pressure & Altitude Sensor Module
Original price was: ₵27.00.₵26.00Current price is: ₵26.00.
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
10 in stock
The BMP180 Digital Barometric Pressure Sensor Module is a high-precision sensor designed for altitude detection, weather monitoring, and environmental data logging. Featuring Bosch’s advanced MEMS technology, it provides precise atmospheric pressure readings, making it ideal for Arduino, Raspberry Pi, and IoT applications.
🔹 Ultra-Low Power & High Sensitivity for Portable Devices 🔄
With its low power consumption and small form factor, the BMP180 sensor is perfect for battery-operated projects, wearable devices, and mobile weather stations. It can measure absolute pressure from 300 hPa to 1100 hPa, allowing for altitude calculations up to 9,000 meters with an accuracy of ±1 meter.
🔹 Technical Specifications & Features ⚡
✔ Operating Voltage: 1.8V – 3.6V (compatible with 3.3V & 5V microcontrollers)
✔ Pressure Range: 300 hPa – 1100 hPa (equivalent to altitude 0 – 9,000m)
✔ Pressure Accuracy: ±1 hPa
✔ Altitude Accuracy: ±1 meter
✔ Communication Interface: I²C (Two-Wire) & SPI
✔ Low Power Consumption: 5µA in ultra-low power mode
✔ Temperature Compensation: Built-in sensor for accurate readings
✔ Dimensions: 11.5mm × 10mm × 3mm (compact & lightweight)
✔ Compatibility: Works with Arduino, Raspberry Pi, ESP8266, ESP32, STM32, and IoT platforms
🔹 Applications – Where to Use the BMP180 Sensor Module 🛠️
✔ Weather Stations & Climate Monitoring – Track barometric pressure changes.
✔ Altitude & GPS Systems – Measure elevation for drones & navigation projects.
✔ IoT & Smart Home Devices – Integrate with WiFi or Bluetooth for data logging.
✔ Wearable & Portable Devices – Monitor environmental conditions on the go.
✔ Drone & UAV Navigation – Essential for altitude-based flight stabilization.
🔹 How to Use & External Resources 📚
The BMP180 sensor module connects easily via I²C or SPI, requiring only two communication pins. Just wire it to your microcontroller, install the required library, and start logging real-time atmospheric data.
📖 Helpful Resources:
✔ Arduino Guide for BMP180 Sensor
✔ Raspberry Pi Pressure Sensor Setup
✔ BMP180 Datasheet & Pinout
✔ YouTube Tutorials – BMP180 with Arduino & Raspberry Pi
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a BMP180 Digital Barometric Pressure Sensor Module in Ghana? Whether for weather monitoring, altitude tracking, or IoT applications, this sensor is affordable, reliable, and easy to integrate. Order today for fast delivery across Ghana!
Related products
3×4 Matrix Membrane Keypad Module | 12 Button Numeric Pad
A simple and reliable input device for Arduino and DIY electronics projects. This flexible 12-key keypad provides only the essential keys (0–9, *, #)—no letters—making it ideal for numeric-only applications. It comes with a peel-and-stick adhesive backing for quick mounting on enclosures, panels, or doors.
-
Keys: 12 (Telephone-style layout)
-
Interface: 7 pins (2.54 mm standard pitch)
-
Mounting: Self-adhesive sticker backing
- Best for: Electronic door locks, vending machines, access control systems, phone dialers, and keypad-based Arduino projects.
4×4 Matrix Membrane Keypad | 16 Button Keypad Module
-
Keys: 16 (0-9, A-D, *, #)
-
Mounting: Self-Adhesive Backing (Peel & Stick)
-
Interface: 8 Pins (Standard 2.54mm header)
-
Best For: Electronic Door Locks, Calculators, and Attendance Systems.
DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor. Encased in a stainless steel tube, it is perfect for measuring water, soil, or air temperature in harsh environments.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
Reviews
There are no reviews yet.