BMP180 Digital Barometric Pressure & Altitude Sensor Module
Original price was: ₵27.00.₵26.00Current price is: ₵26.00.
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
10 in stock
The BMP180 Digital Barometric Pressure Sensor Module is a high-precision sensor designed for altitude detection, weather monitoring, and environmental data logging. Featuring Bosch’s advanced MEMS technology, it provides precise atmospheric pressure readings, making it ideal for Arduino, Raspberry Pi, and IoT applications.
🔹 Ultra-Low Power & High Sensitivity for Portable Devices 🔄
With its low power consumption and small form factor, the BMP180 sensor is perfect for battery-operated projects, wearable devices, and mobile weather stations. It can measure absolute pressure from 300 hPa to 1100 hPa, allowing for altitude calculations up to 9,000 meters with an accuracy of ±1 meter.
🔹 Technical Specifications & Features ⚡
✔ Operating Voltage: 1.8V – 3.6V (compatible with 3.3V & 5V microcontrollers)
✔ Pressure Range: 300 hPa – 1100 hPa (equivalent to altitude 0 – 9,000m)
✔ Pressure Accuracy: ±1 hPa
✔ Altitude Accuracy: ±1 meter
✔ Communication Interface: I²C (Two-Wire) & SPI
✔ Low Power Consumption: 5µA in ultra-low power mode
✔ Temperature Compensation: Built-in sensor for accurate readings
✔ Dimensions: 11.5mm × 10mm × 3mm (compact & lightweight)
✔ Compatibility: Works with Arduino, Raspberry Pi, ESP8266, ESP32, STM32, and IoT platforms
🔹 Applications – Where to Use the BMP180 Sensor Module 🛠️
✔ Weather Stations & Climate Monitoring – Track barometric pressure changes.
✔ Altitude & GPS Systems – Measure elevation for drones & navigation projects.
✔ IoT & Smart Home Devices – Integrate with WiFi or Bluetooth for data logging.
✔ Wearable & Portable Devices – Monitor environmental conditions on the go.
✔ Drone & UAV Navigation – Essential for altitude-based flight stabilization.
🔹 How to Use & External Resources 📚
The BMP180 sensor module connects easily via I²C or SPI, requiring only two communication pins. Just wire it to your microcontroller, install the required library, and start logging real-time atmospheric data.
📖 Helpful Resources:
✔ Arduino Guide for BMP180 Sensor
✔ Raspberry Pi Pressure Sensor Setup
✔ BMP180 Datasheet & Pinout
✔ YouTube Tutorials – BMP180 with Arduino & Raspberry Pi
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a BMP180 Digital Barometric Pressure Sensor Module in Ghana? Whether for weather monitoring, altitude tracking, or IoT applications, this sensor is affordable, reliable, and easy to integrate. Order today for fast delivery across Ghana!
Related products
3×4 Matrix Membrane Keypad Module | 12 Button Numeric Pad
A simple and reliable input device for Arduino and DIY electronics projects. This flexible 12-key keypad provides only the essential keys (0–9, *, #)—no letters—making it ideal for numeric-only applications. It comes with a peel-and-stick adhesive backing for quick mounting on enclosures, panels, or doors.
-
Keys: 12 (Telephone-style layout)
-
Interface: 7 pins (2.54 mm standard pitch)
-
Mounting: Self-adhesive sticker backing
- Best for: Electronic door locks, vending machines, access control systems, phone dialers, and keypad-based Arduino projects.
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
Teach your robot to see. This sensor emits infrared light and detects reflections to see if an object is in front of it. It is the essential component for building "Obstacle Avoiding Robots" and simple security alarms.
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
The easiest way to drive 12V/24V loads. This breakout board allows your Arduino to control high-voltage devices like LED strips, DC motors, and solenoid valves using the IRF520 MOSFET. It features screw terminals for easy wiring—no soldering required!
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
Make your project react to light. This sensor detects the brightness of the environment. Unlike the 3-pin version, this 4-Pin Module gives you both a Digital Output (to trigger a switch) and an Analog Output (to measure exact brightness). Perfect for automatic streetlights and solar trackers.
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
MQ-3 Alcohol Sensor Module | Breathalyzer & Ethanol Detector
Build your own Breathalyzer. The MQ-3 is specifically designed to detect alcohol (Ethanol) vapors. It has high sensitivity and fast response time, making it the perfect sensor for "Smart Car" safety systems that prevent drunk driving.
-
Detects: Alcohol, Ethanol, Benzine.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Warm-up: Heater requires ~20 seconds.
-
Best For: Breathalyzers, Drunk Driving Alarms, and Industrial Monitoring.
Reviews
There are no reviews yet.