Force Sensitive Resistor 12.7mm Pressure Sensor (FSR402)

₵55.00

The Force Sensitive Resistor 12.7mm (FSR402) detects touch and applied pressure through changes in electrical resistance. Its thin, flexible design and two-pin connection make it ideal for Arduino, ESP32, robotics, pressure-sensitive buttons and interactive electronics projects.

10 in stock

Description

The Force Sensitive Resistor 12.7mm (FSR402) is a thin-film pressure sensor designed to detect physical touch, squeezing and changes in applied force.

Unlike conventional switches that simply turn ON or OFF, the FSR402 changes its electrical resistance depending on how much force is applied to its circular sensing surface.

Its lightweight, flexible construction makes it suitable for Arduino and ESP32 projects, robotics, pressure-sensitive controls, interactive devices and STEM education.

Key Features

  • Pressure-Sensitive Resistance: Resistance decreases as applied force increases.
  • 12.7mm Sensing Area: Circular detection surface for sensing touch and applied force.
  • Thin-Film Construction: Lightweight, flexible design for compact electronic projects.
  • Two-Pin Connection: Simple, non-polarised electrical interface.
  • Analogue Force Detection: Works with a voltage-divider circuit to produce a measurable analogue signal.
  • Microcontroller Compatible: Suitable for Arduino, ESP32 and other controllers with analogue inputs.
  • No Moving Parts: Detects applied force through changes in its resistive sensing material.
  • Compact Design: Suitable for embedded controls, robotics and interactive applications.

Technical Specifications

Specification Details
Model FSR402
Product Type Force Sensitive Resistor
Sensor Technology Resistive Thin Film
Sensing Method Applied Force / Pressure
Active Sensing Diameter 12.7mm
Overall Length Approximately 60mm
Overall Width Approximately 19mm
Electrical Terminals 2
Output Characteristic Variable Resistance
Resistance Behaviour Decreases with Applied Force
Polarity Non-Polarised
External Circuit Voltage Divider Recommended
Compatible Controllers Arduino, ESP32 and Other ADC-Based Controllers
Colour Black Sensing Head with Flexible Tail

Applications

1. Arduino Pressure Detection Projects

Use the FSR402 to detect when a person presses a surface or applies force to an electronic device.

Connect the sensor to an Arduino Uno R3 Development Board through a voltage-divider circuit to read changing pressure levels.

2. Robotics and Gripper Feedback

Install the sensor on a suitable robotic gripping surface to detect when an object is being held.

The changing resistance can provide feedback for controlling gripping force in experimental robotics systems.

3. Pressure-Sensitive Buttons

Create electronic buttons that respond to how firmly they are pressed rather than simply detecting contact.

This is useful for interactive control panels, custom input devices and educational prototypes.

4. Smart Seating and Contact Detection

Develop experimental systems that detect pressure applied to a chair, cushion or contact surface.

5. Interactive Electronics and Gaming

Build pressure-sensitive controllers, musical instruments, interactive toys and electronic installations.

6. STEM and Engineering Education

Demonstrate variable resistance, analogue sensing, voltage-divider circuits and microcontroller programming.

How the Force Sensitive Resistor 12.7mm Works

The FSR402 contains pressure-sensitive conductive material whose electrical resistance changes when force is applied.

Its behaviour can be summarised as follows:

  • No Pressure: Very high resistance.
  • Light Pressure: Resistance begins to decrease.
  • Greater Pressure: Resistance decreases further.

This makes it possible to detect relative changes in applied force.

The relationship between force and resistance is nonlinear. The sensor is therefore particularly useful for detecting touch and estimating relative pressure, rather than obtaining highly accurate weight measurements.

Connecting the FSR402 to Arduino Uno

The sensor is a passive, two-terminal component. It requires an external resistor to convert its changing resistance into an analogue voltage that an Arduino can measure.

A common starting circuit uses a 10kΩ resistor.

Connection Arduino Uno
FSR Terminal 1 5V
FSR Terminal 2 A0
10kΩ Resistor Between A0 and GND

With this arrangement, the analogue voltage at A0 generally increases as greater force is applied.

For the voltage-divider circuit, DIYGH stocks 1/4W Carbon Film Resistors in selectable resistance values.

The circuit can be assembled using a Solderless Breadboard MB-102 and suitable Jumper Wires.

The sensor itself does not require a separate power supply. The 5V connection is used to excite the voltage-divider circuit.

For ESP32 projects, use a suitable 3.3V analogue sensing circuit and an ADC-compatible GPIO.

Force Sensitive Resistor vs Load Cell

Both devices can respond to applied mechanical force, but they serve different measurement requirements.

Force Sensitive Resistor (FSR402)

Best suited for detecting contact, relative pressure changes and approximate applied force in interactive electronics.

Load Cell

Better suited for applications requiring calibrated force or weight measurements, such as electronic weighing scales.

The FSR402 is not a direct replacement for a precision load cell.

Installation Guidelines

  1. Identify the circular pressure-sensitive area.
  2. Connect the two terminals to the required sensing circuit.
  3. Position the sensing head on a suitable supporting surface.
  4. Apply force evenly to the circular sensing area.
  5. Observe the analogue readings using the microcontroller.
  6. Adjust the detection threshold or calibrate the system for the intended application.

Important Usage Information

  • Apply force primarily to the circular sensing surface.
  • Avoid folding or sharply bending the flexible sensor tail.
  • Do not puncture the sensing surface.
  • Avoid excessive mechanical loading that could damage the sensor.
  • Use suitable low-voltage measuring circuits.
  • Do not connect the sensor directly across a power supply without appropriate current limiting.
  • Keep the sensing element away from moisture and damaging chemicals.
  • Avoid excessive soldering heat near the flexible sensing material.
  • Calibrate the response when consistent force thresholds are required.
  • The sensor is not recommended for precision weighing or safety-critical force measurement.

Package Includes

  • 1 x FSR402 Force Sensitive Resistor Pressure Sensor

Microcontroller, resistors, breadboard and connection wires are not included.

Available from DIYGH Tech Hub, Apatrapa Junction, Kumasi, Ghana, for robotics, pressure sensing, Arduino projects and STEM education.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Force Sensitive Resistor 12.7mm Pressure Sensor (FSR402)”

Your email address will not be published. Required fields are marked *