Raindrop Sensor Module | Rain & Water Detector for Arduino
₵16.00
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
4 in stock
The Raindrop Sensor Module is a high-sensitivity water detection sensor designed to detect rainfall, moisture levels, and water leakage. Featuring both analog and digital outputs, this sensor is ideal for weather monitoring, smart irrigation systems, and flood detection. Compatible with Arduino, Raspberry Pi, ESP8266, and IoT projects, it helps automate rain-based triggers and alerts.
🔹 Dual Output for Precise Rain Detection & Automation ⚡
✔ Analog Output (AO): Provides real-time moisture level readings.
✔ Digital Output (DO): Threshold-based HIGH/LOW signal for automation.
✔ Adjustable Sensitivity: Built-in potentiometer for fine-tuning water detection.
✔ Operating Voltage: 3.3V – 5V (Compatible with Arduino, ESP32, and Raspberry Pi).
✔ Corrosion-Resistant Probe: Ensures durability in outdoor conditions.
✔ Power Efficiency: Low power consumption for battery-powered IoT applications.
🔹 Applications – Where to Use the Raindrop Sensor Module 🛠️
✔ Smart Irrigation Systems – Trigger watering systems based on rainfall detection.
✔ Weather Monitoring Stations – Measure rain intensity for forecasting applications.
✔ IoT & Home Automation – Automate roof windows, awnings, and outdoor equipment.
✔ Flood & Water Leak Detection – Alerts users in case of excessive water accumulation.
✔ Agricultural & Greenhouse Monitoring – Enhance crop management with real-time data.
🔹 How to Use & External Resources 📚
The Raindrop Sensor Module connects easily to Arduino, Raspberry Pi, and microcontrollers. Simply place the sensor pad in an open environment, connect VCC, GND, AO, and DO, and start measuring water levels with simple code and libraries.
📖 Helpful Resources for Raindrop Sensor Module:
✔ Arduino Rain Sensor Setup Guide
✔ Raspberry Pi Rain Detection Project
✔ YouTube Tutorials – Raindrop Sensor with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a Raindrop Sensor Module (Water Detection) in Ghana? Whether for weather stations, irrigation control, or home automation, this high-accuracy sensor is a must-have. Order today for fast delivery across Ghana!
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your microcontroller from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
16×2 LCD Display with I2C Interface – Yellow Backlight
A clear, beginner-friendly 16×2 character display with the I2C backpack already soldered. The yellow-green backlight provides excellent readability while the I2C interface reduces wiring to only four connections.
Display: 16 characters × 2 lines
Backlight: Yellow-Green
Interface: I2C (VCC, GND, SDA, SCL)
Voltage: 5V DC
Contrast: Adjustable
Installation: Ready to use – no backpack soldering required
Best For: Arduino, ESP32, Raspberry Pi, IoT and educational projects
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
Teach your robot to see. This sensor emits infrared light and detects reflections to see if an object is in front of it. It is the essential component for building "Obstacle Avoiding Robots" and simple security alarms.
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
Build your own Fire & Gas Leak Alarm. The MQ-2 is a dual-purpose safety sensor. It detects Smoke (from fires) and Combustible Gases (like LPG, Propane, and Butane). It is the standard module for building "Smart Kitchen" safety monitors.
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
MQ-3 Alcohol Sensor Module | Breathalyzer & Ethanol Detector
Build your own Breathalyzer. The MQ-3 is specifically designed to detect alcohol (Ethanol) vapors. It has high sensitivity and fast response time, making it the perfect sensor for "Smart Car" safety systems that prevent drunk driving.
-
Detects: Alcohol, Ethanol, Benzine.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Warm-up: Heater requires ~20 seconds.
-
Best For: Breathalyzers, Drunk Driving Alarms, and Industrial Monitoring.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.