SIM800L GSM GPRS Module
₵85.00
The SIM800L GSM GPRS Module enables SMS, voice calls, and mobile data communication for Arduino, Raspberry Pi, and IoT projects. Featuring quad-band GSM support, low power consumption, and UART communication, it’s perfect for remote monitoring, GPS tracking, and automation.
Out of stock
This product is currently sold out.
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
The SIM800L GSM GPRS Module is a compact, low-cost wireless module that enables voice calls, SMS messaging, and mobile internet connectivity in Arduino, Raspberry Pi, ESP32, and IoT projects. Supporting quad-band frequencies (850/900/1800/1900MHz), this module provides global network coverage, making it ideal for remote monitoring, GPS tracking, smart home automation, and security systems.
🔹 Compact, Low-Power GSM Module with Full Network Support ⚡
✔ Operating Voltage: 3.7V – 4.2V (Ideal for Li-ion batteries or voltage regulators).
✔ Network Support: GSM/GPRS (2G) – Supports 850/900/1800/1900MHz bands.
✔ Data Transmission: Supports TCP/IP, HTTP, and FTP protocols.
✔ SIM Card Compatibility: Micro SIM slot for mobile network access.
✔ Antenna Options: External PCB or spring antenna for better signal reception.
✔ Communication Interface: UART (TX/RX) – Works with Arduino, ESP8266, STM32, and Raspberry Pi.
✔ Low Power Consumption: Ideal for battery-powered IoT applications.
🔹 Applications – Where to Use the SIM800L Module 🛠️
✔ IoT & Smart Home Automation – Control devices remotely via SMS or mobile data.
✔ GPS Tracking & Asset Monitoring – Integrate with GPS modules for real-time location tracking.
✔ Security & Alarm Systems – Send alerts via SMS in case of intrusion or motion detection.
✔ Wireless Sensor Networks – Transmit sensor data over GPRS for remote monitoring.
✔ Remote Control & Telemetry – Control relays, smart devices, and industrial equipment wirelessly.
🔹 How to Use & External Resources 📚
The SIM800L GSM GPRS Module connects via UART (TX/RX) to Arduino, ESP32, STM32, and Raspberry Pi. Use AT commands to send SMS, make calls, or access mobile data. Ensure a regulated power supply (4.2V) for stable operation.
📖 Helpful Resources for SIM800L GSM Module:
✔ SIM800L Datasheet & Pinout
✔ Arduino SIM800L GSM Communication Guide
✔ Raspberry Pi SIM800L GSM Module Setup
✔ YouTube Tutorials – SIM800L with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Are you looking for a SIM800L GSM GPRS Module in Ghana? Whether for IoT projects, remote monitoring, or SMS-based automation, this compact and reliable GSM module is a must-have. Order today for fast delivery across Ghana!
Related products
16×2 LCD Display with I2C Interface – Yellow Backlight
A clear, beginner-friendly 16×2 character display with the I2C backpack already soldered. The yellow-green backlight provides excellent readability while the I2C interface reduces wiring to only four connections.
Display: 16 characters × 2 lines
Backlight: Yellow-Green
Interface: I2C (VCC, GND, SDA, SCL)
Voltage: 5V DC
Contrast: Adjustable
Installation: Ready to use – no backpack soldering required
Best For: Arduino, ESP32, Raspberry Pi, IoT and educational projects
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
Build your own Fire & Gas Leak Alarm. The MQ-2 is a dual-purpose safety sensor. It detects Smoke (from fires) and Combustible Gases (like LPG, Propane, and Butane). It is the standard module for building "Smart Kitchen" safety monitors.
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
Detect motion, impacts, and theft. The SW-420 is a "Normally Closed" vibration sensor that triggers whenever it feels a shake. It features an onboard potentiometer to adjust sensitivity, making it perfect for sensitive projects like door alarms or earthquake detectors.
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.