SIM800L GSM GPRS Module
₵85.00
The SIM800L GSM GPRS Module enables SMS, voice calls, and mobile data communication for Arduino, Raspberry Pi, and IoT projects. Featuring quad-band GSM support, low power consumption, and UART communication, it’s perfect for remote monitoring, GPS tracking, and automation.
Out of stock
This product is currently sold out.
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
The SIM800L GSM GPRS Module is a compact, low-cost wireless module that enables voice calls, SMS messaging, and mobile internet connectivity in Arduino, Raspberry Pi, ESP32, and IoT projects. Supporting quad-band frequencies (850/900/1800/1900MHz), this module provides global network coverage, making it ideal for remote monitoring, GPS tracking, smart home automation, and security systems.
🔹 Compact, Low-Power GSM Module with Full Network Support ⚡
✔ Operating Voltage: 3.7V – 4.2V (Ideal for Li-ion batteries or voltage regulators).
✔ Network Support: GSM/GPRS (2G) – Supports 850/900/1800/1900MHz bands.
✔ Data Transmission: Supports TCP/IP, HTTP, and FTP protocols.
✔ SIM Card Compatibility: Micro SIM slot for mobile network access.
✔ Antenna Options: External PCB or spring antenna for better signal reception.
✔ Communication Interface: UART (TX/RX) – Works with Arduino, ESP8266, STM32, and Raspberry Pi.
✔ Low Power Consumption: Ideal for battery-powered IoT applications.
🔹 Applications – Where to Use the SIM800L Module 🛠️
✔ IoT & Smart Home Automation – Control devices remotely via SMS or mobile data.
✔ GPS Tracking & Asset Monitoring – Integrate with GPS modules for real-time location tracking.
✔ Security & Alarm Systems – Send alerts via SMS in case of intrusion or motion detection.
✔ Wireless Sensor Networks – Transmit sensor data over GPRS for remote monitoring.
✔ Remote Control & Telemetry – Control relays, smart devices, and industrial equipment wirelessly.
🔹 How to Use & External Resources 📚
The SIM800L GSM GPRS Module connects via UART (TX/RX) to Arduino, ESP32, STM32, and Raspberry Pi. Use AT commands to send SMS, make calls, or access mobile data. Ensure a regulated power supply (4.2V) for stable operation.
📖 Helpful Resources for SIM800L GSM Module:
✔ SIM800L Datasheet & Pinout
✔ Arduino SIM800L GSM Communication Guide
✔ Raspberry Pi SIM800L GSM Module Setup
✔ YouTube Tutorials – SIM800L with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Are you looking for a SIM800L GSM GPRS Module in Ghana? Whether for IoT projects, remote monitoring, or SMS-based automation, this compact and reliable GSM module is a must-have. Order today for fast delivery across Ghana!
Related products
16-in-1 Sensor Module Kit for Arduino, ESP32 & Raspberry Pi
Expand your project possibilities instantly. This value-packed kit contains 16 of the most popular sensors for home automation and robotics. Instead of buying modules individually, get everything you need in one box.
-
Includes: DHT11 Temperature, Relay, Ultrasonic, Motion Sensor, and 12 more!
-
Compatibility: Works perfectly with Arduino Uno, Mega, Nano, and Raspberry Pi.
-
Perfect For: Learning how to read data and control devices.
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
The easiest way to drive 12V/24V loads. This breakout board allows your Arduino to control high-voltage devices like LED strips, DC motors, and solenoid valves using the IRF520 MOSFET. It features screw terminals for easy wiring—no soldering required!
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
Build your own Fire & Gas Leak Alarm. The MQ-2 is a dual-purpose safety sensor. It detects Smoke (from fires) and Combustible Gases (like LPG, Propane, and Butane). It is the standard module for building "Smart Kitchen" safety monitors.
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your "Dry" trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
Detect motion, impacts, and theft. The SW-420 is a "Normally Closed" vibration sensor that triggers whenever it feels a shake. It features an onboard potentiometer to adjust sensitivity, making it perfect for sensitive projects like door alarms or earthquake detectors.
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.