DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Original price was: ₵40.00.₵38.00Current price is: ₵38.00.
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor. Encased in a stainless steel tube, it is perfect for measuring water, soil, or air temperature in harsh environments.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
5 in stock
The DS18B20 Waterproof Temperature Probe is a high-precision digital sensor designed for accurate temperature measurement in liquids, air, and harsh environments. Featuring a fully waterproof stainless steel casing, this probe is ideal for Arduino, Raspberry Pi, ESP8266, and industrial IoT applications.
🔹 One-Wire Communication for Easy Integration & Multiple Sensors ⚡
✔ Temperature Range: -55°C to +125°C (±0.5°C accuracy between -10°C and +85°C).
✔ Communication Protocol: One-Wire (Supports multiple sensors on a single data line).
✔ Waterproof Stainless Steel Probe: Ideal for wet & outdoor environments.
✔ Operating Voltage: 3.0V – 5.5V (Compatible with Arduino & Raspberry Pi).
✔ Cable Length: 1m, 2m, or more (varies by model).
✔ Durability: Resistant to rust, corrosion, and harsh environmental conditions.
🔹 Applications – Where to Use the DS18B20 Waterproof Sensor 🛠️
✔ Liquid Temperature Monitoring – Measure water, oil, and chemical temperatures.
✔ Aquarium & Hydroponics Systems – Monitor fish tanks, ponds, and plant systems.
✔ Smart Home & IoT Projects – Automate temperature control in smart environments.
✔ Weather Stations & Outdoor Monitoring – Use in environmental sensing applications.
✔ Industrial & Lab Equipment – Measure accurate temperatures in harsh conditions.
🔹 How to Use & External Resources 📚
The DS18B20 sensor communicates via One-Wire protocol, allowing multiple sensors to run on a single data pin. It works with Arduino, Raspberry Pi, ESP32, and STM32 and requires a 4.7kΩ pull-up resistor for stable operation.
📖 Helpful Resources for DS18B20 Waterproof Temperature Probe:
✔ DS18B20 Datasheet & Pinout
✔ Arduino Guide for DS18B20
✔ Raspberry Pi DS18B20 Temperature Sensor Setup
✔ YouTube Tutorials – DS18B20 Sensor with Arduino & Raspberry Pi
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a DS18B20 Waterproof Temperature Probe in Ghana? Whether for liquid temperature monitoring, IoT automation, or weather stations, this high-accuracy, stainless steel sensor is a must-have. Order today for fast delivery across Ghana!
Related products
16-in-1 Sensor Module Kit for Arduino, ESP32 & Raspberry Pi
Expand your project possibilities instantly. This value-packed kit contains 16 of the most popular sensors for home automation and robotics. Instead of buying modules individually, get everything you need in one box.
-
Includes: DHT11 Temperature, Relay, Ultrasonic, Motion Sensor, and 12 more!
-
Compatibility: Works perfectly with Arduino Uno, Mega, Nano, and Raspberry Pi.
-
Perfect For: Learning how to read data and control devices.
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.