GY-302 BH1750 Digital Light Intensity Sensor Module
Original price was: ₵40.00.₵35.00Current price is: ₵35.00.
Digital ambient light sensor for accurate light-intensity measurement in Arduino, ESP32, Raspberry Pi and IoT projects. The GY-302 uses the BH1750 sensor to provide direct illumination readings in lux through an I2C interface, eliminating the analogue calculations normally required with LDR sensors.
Sensor: BH1750FVI
Measurement: Light intensity in lux
Supply: 3V–5V DC
Interface: I2C
Range: Approx. 1–65,535 lux
ADC: 16-bit
I2C Address: 0x23 / 0x5C selectable
Best For: Smart lighting, agriculture, environmental monitoring, robotics and IoT projects
10 in stock
The GY-302 BH1750 Digital Light Intensity Sensor Module is a high-precision ambient light sensor designed to measure illumination directly in lux (lx). It uses the BH1750 digital light sensor and communicates with Arduino, ESP32, STM32, Raspberry Pi and other microcontrollers through the I2C interface.
Unlike basic LDR light sensors that provide an analogue resistance change, the BH1750 contains an integrated 16-bit ADC and provides digital light-intensity readings directly. This makes it easier to obtain consistent measurements for automatic lighting, environmental monitoring, smart agriculture and IoT applications.
The GY-302 supports a wide measurement range of approximately 1–65,535 lux, with high-resolution measurement modes capable of resolutions down to approximately 0.5 lux. Its spectral response is designed to approximate the sensitivity of the human eye, making it suitable for measuring visible ambient brightness.
The module also provides an ADDR pin, allowing selection between two I2C addresses so that two BH1750 sensors can be connected to the same I2C bus.
Technical Specifications
| Specification | Details |
|---|---|
| Module | GY-302 |
| Sensor IC | BH1750FVI |
| Sensor Type | Digital ambient light sensor |
| Measurement Unit | Lux (lx) |
| Module Supply Voltage | 3V–5V DC |
| Communication Interface | I2C |
| ADC Resolution | 16-bit |
| Standard Measurement Range | Approx. 1–65,535 lux |
| High-Resolution Mode | Down to approx. 0.5 lux resolution |
| I2C Addresses | 0x23 / 0x5C selectable |
| Pins | VCC, GND, SCL, SDA, ADDR |
| Output | Direct digital light-intensity reading |
| Typical Module Size | Approx. 18.5 × 13.9 mm |
| Compatible Platforms | Arduino, ESP32, ESP8266, STM32, Raspberry Pi |
Applications
- Automatic lighting systems
- Smart-home projects
- Solar-light controllers
- Weather and environmental monitoring
- Smart agriculture and greenhouse monitoring
- Automatic display brightness control
- IoT sensor systems
- Robotics
- STEM and educational projects
- Light-intensity data logging
Package Includes
1 × GY-302 BH1750 Light Intensity Sensor Module
1 × Pin Header
Related products
16×2 LCD Display with I2C Interface – Blue Backlight
4×4 Matrix Membrane Keypad | 16 Button Keypad Module
-
Keys: 16 (0-9, A-D, *, #)
-
Mounting: Self-Adhesive Backing (Peel & Stick)
-
Interface: 8 Pins (Standard 2.54mm header)
-
Best For: Electronic Door Locks, Calculators, and Attendance Systems.
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor. Encased in a stainless steel tube, it is perfect for measuring water, soil, or air temperature in harsh environments.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm - 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your "Dry" trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.