Infrared Remote Control Kit 17-Key (HX1838)
₵20.00
The Infrared Remote Control Kit 17-Key (HX1838) allows you to control Arduino, ESP32 and other microcontroller projects wirelessly using a handheld remote. It includes an IR receiver module and connection cable, making it ideal for robotics, lighting control and home automation experiments. Battery not included.
50 in stock
The Infrared Remote Control Kit (HX1838) is a wireless control solution for Arduino, ESP32 and other compatible microcontrollers. It allows users to send commands from a handheld remote to an electronic circuit using infrared light, similar to the technology found in television remote controls.
The kit features a 17-button remote control, a compact HX1838 infrared receiver module and a connection cable, making it useful for robotics, home automation, LED lighting, electronic control systems and STEM projects.
Key Features
- 17-Key Remote Control: Includes numerical buttons, directional controls, OK, * and # keys.
- 38kHz Infrared Receiver: Detects compatible modulated infrared remote-control signals.
- Wireless Operation: Allows remote control without a physical connection between the handheld remote and receiver.
- 3-Pin Receiver Interface: Simple signal, power and ground connections.
- 3.3V-5V Operation: Compatible with suitable Arduino, ESP32 and other microcontroller systems.
- Digital Output: Sends received infrared pulse information to a microcontroller for decoding.
- Compact Design: Small receiver board suitable for electronic enclosures and robotics projects.
- Microcontroller Programming Support: Compatible with the Arduino IRremote library.
Technical Specifications
| Specification | Details |
|---|---|
| Product Type | Infrared Remote Control Kit |
| Receiver Model | HX1838 |
| Remote Control | 17-Key Handheld Remote |
| Communication | Infrared |
| Receiver Frequency | 38kHz |
| Receiver Operating Voltage | 3.3V-5V DC |
| Receiver Output | Digital |
| Receiver Pins | Signal, VCC, GND |
| Typical Remote Range | Up to approximately 5-8m, line of sight |
| Remote Power | Coin-Cell Battery |
| Battery Included | No |
| Receiver PCB Colour | Black |
| Compatible Controllers | Arduino, ESP32 and other suitable microcontrollers |
Applications
1. Arduino Remote Control Projects
Use the remote control to operate LEDs, buzzers, displays and other electronic components through a programmed Arduino.
The Arduino Uno R3 Development Board available at DIYGH is a suitable starting point for learning infrared remote control programming.
2. Remote-Controlled Robot Cars
Build an Arduino-controlled robot that responds to directional commands from the handheld remote.
The arrow buttons can be programmed to move a robot forward, backward, left or right.
For robotics development, DIYGH stocks the 4WD Smart Robot Car Chassis Kit, which can be combined with a suitable microcontroller and motor driver.
3. Home Automation Experiments
Use the Infrared Remote Control Kit to control electronic switching circuits, small lamps and compatible automation devices.
For example, connect the receiver to a microcontroller that operates a 1-Channel 5V Relay Module.
The receiver supplies control information to the microcontroller; it does not directly switch electrical loads.
4. LED Lighting Control
Program different remote buttons to turn LEDs on and off, change lighting modes or adjust PWM brightness.
5. Electronic Menus and Interfaces
Use the numeric and directional buttons for menu navigation, selecting operating modes and controlling embedded electronic devices.
6. STEM and Electronics Education
Demonstrate infrared communication, digital signal decoding, microcontroller programming and wireless control through practical experiments.
How the Infrared Remote Control Kit Works
The handheld remote sends coded infrared light when a button is pressed.
The HX1838 receiver detects the infrared signal and removes the 38kHz carrier, producing digital pulses that can be interpreted by a microcontroller.
The microcontroller then identifies the received command and performs the programmed action.
For example:
- Press 1 to turn on an LED.
- Press 2 to turn off an LED.
- Press the upward arrow to move a robot forward.
- Press the downward arrow to move a robot backward.
- Press OK to activate a selected function.
The exact button functions are determined by the user’s program.
Receiver Pin Connections
| Pin | Function |
|---|---|
| S / OUT | Digital infrared signal output |
| VCC / + | Positive power supply |
| GND / – | Ground |
Follow the markings on the supplied receiver PCB when making connections.
Connecting to Arduino Uno
A simple connection arrangement is:
| IR Receiver | Arduino Uno |
|---|---|
| VCC | 5V |
| GND | GND |
| S / OUT | Digital Pin D2 |
After connecting the receiver, install the IRremote library in the Arduino IDE.
The library can decode the received infrared commands and make them available to an Arduino program.
For additional wiring and prototyping, DIYGH supplies Male-to-Female Jumper Wires.
Programming the Remote Control
To begin using the kit:
- Connect the receiver to a suitable microcontroller.
- Install the IRremote library.
- Open a receiver example from the library.
- Upload the program to the microcontroller.
- Point the remote towards the receiver and press a button.
- View the decoded command in the Arduino Serial Monitor.
- Use the detected command values to control the desired output.
The Arduino IRremote Library provides example programs for receiving and decoding infrared signals.
Infrared vs Radio Frequency Remote Control
Infrared communication uses light and normally requires a clear path between the remote control and receiver.
It is ideal for short-range, room-based control applications.
Unlike radio-frequency modules, infrared signals generally cannot pass through walls or opaque barriers.
Important Usage Information
- Use a suitable supply between 3.3V and 5V for the receiver module.
- Check the receiver PCB pin labels before connecting power.
- Insert a compatible coin-cell battery into the handheld remote before use.
- Point the remote towards the receiver for reliable operation.
- Strong sunlight and certain lighting sources can interfere with infrared reception.
- The module does not directly power motors or electrical appliances.
- Use a suitable microcontroller and driver circuit for controlling external loads.
- The receiver is intended for infrared communication, not Bluetooth, Wi-Fi or radio-frequency operation.
Package Includes
- 1 x 17-Key Infrared Remote Control
- 1 x HX1838 Infrared Receiver Module
- 1 x 3-Wire Connection Cable
Battery not included.
Available from DIYGH Tech Hub, Apatrapa Junction, Kumasi, Ghana, for Arduino projects, robotics, home automation and STEM electronics.
Related products
16×2 LCD Display with I2C Interface – Yellow Backlight
A clear, beginner-friendly 16×2 character display with the I2C backpack already soldered. The yellow-green backlight provides excellent readability while the I2C interface reduces wiring to only four connections.
Display: 16 characters × 2 lines
Backlight: Yellow-Green
Interface: I2C (VCC, GND, SDA, SCL)
Voltage: 5V DC
Contrast: Adjustable
Installation: Ready to use – no backpack soldering required
Best For: Arduino, ESP32, Raspberry Pi, IoT and educational projects
20×4 LCD Display Module (Blue Backlight) | 2004A Character Screen
Double the space, double the data. The standard 16x2 LCD is great, but sometimes you need more room. The 20x4 LCD gives you 4 lines of text (20 characters per line), allowing you to display complex menus, sensor readings, and status messages all at once.
-
Size: 20 Characters x 4 Lines.
-
Display: White Text on Blue Background.
-
Controller: HD44780 (Standard Industry Chip).
- Best For: Weather Stations, 3D Printers, and Advanced Menus.
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
Give your robot the ability to see fire. This sensor detects the specific infrared light wavelengths (760nm - 1100nm) emitted by flames. It is the essential "eye" for Fire Fighting Robots and home fire alarm projects.
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm - 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
Teach your robot to see. This sensor emits infrared light and detects reflections to see if an object is in front of it. It is the essential component for building "Obstacle Avoiding Robots" and simple security alarms.
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
Detect motion, impacts, and theft. The SW-420 is a "Normally Closed" vibration sensor that triggers whenever it feels a shake. It features an onboard potentiometer to adjust sensitivity, making it perfect for sensitive projects like door alarms or earthquake detectors.
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.

Reviews
There are no reviews yet.